Gift Services-Up to $100
Flat 10$ Shipping on all Diamond Class Product
Gift Services-Up to $100
Phone: 806-503-2161

Mads Smarty POD Tuner


In stock
  • Shipping Restrictions:
  •  This part is NOT available to ship to the state of California.
Buy it now

Product Name: Mads Smarty POD Tuner
Manufacturer: Mads Smarty
Manufacturer Part #: S-06POD
Black Diamond Unlimited Part #: SMAS-06POD
Fitment Notes: Mads Smarty POD Tuner – 03-07 Dodge Cummins 5.9L

Fast guide to Smarty’s software levels:
The horsepower settings. except #0, all other software has a modified “Torque management” ( TQM ). The throttle response is greatly improved but is set to a save limit. With “Save” I mean save for your tranny and the rest of the drive line.

  • SW # 0 : Half power
  • SW # 1 : 30 hp increase, with added timing.
  • SW # 2 : 60 hp increase, no added timing.
  • SW # 3 : 60 hp increase, with added timing.
  • SW # 4 : 90 hp increase, no added timing.
  • SW # 5 : 90 hp increase, with added timing.
  • SW # 6 : 160 hp increase, no added timing.
  • SW # 7 : 160 hp increase, with added timing.
  • SW # 8 : 210 hp increase, no added timing.
  • SW # 9 : 210 hp increase, with added timing.

Tested on stock trucks on a Mustang Dyno. Stock means just that. Stock! Even the air filters were stock…

The trucks were S T O C K, even the wastegate settings! We checked the “baseline” ( the stock truck Hp at the rear wheels ) twice a day in order to be sure about our findings. The above-declared HP numbers are all rounded down to the closest number. For example, the 90 Hp file actually did 96 Hp. That’s a 90 Hp software for me, not a 100. The 170 Hp was 174.

Power on Demand:

  • 100 power levels selectable in just one second during the driving!
  • It’s easy: just type the preferred power level directly on the Smarty keyboard, from 00 to 99. That’s all!
  • For security reasons, the truck waits that the throttle to be released before applying the new power level.

No trace is left in the ECM!
I hereby CLAIM that Smarty CR is the FIRST AND ONLY downloader that does not erase any of the stored data in the ECM. Smarty does NOT leave any electronic footprints in the ECM or any other electronic module in the truck. Smarty does NOT set ANY codes once the ECM is set back to stock. Smarty does NOT need to have fuses pulled.

No matter what the competition claims, in one way or another they’re ALL detectable. Smarty is NOT!

Yet, Smarty can not do one thing for you. Fix what others have broken. Smarty can not restore a key on the counter that another downloader has erased. Smarty can not fix VIN# troubles caused by other products. If your Check engine / ABS light is on because another product has screwed your ECM, Smarty can not fix it, the other guy HAS to.

ABS / Speedo recalibration
The tire height can be adjusted up to 44″ in increments of 10 tenths of an inch in just a couple of seconds. Of course, Smarty needs to be VIN# locked to the truck in order to get into the ABS adjustment section.

DTC Code reader
The name says it all. You can read and erase codes. Codes are displayed also in plain English. That’s old news by now. Smarty S-03 was the first one to provide that utility, others found the idea to be a good one too. ( Smarty does erase ABS codes too but does not display them )

ECM update speed
Faster than anything else on the market! Again we’ve done our homework on the protocol. Less than 5 minutes. Three times faster than a Star-Scan diagnostic tool or competitor.

We have developed our own bootloader in order to not have to pull fuses should an update become interrupted for any reason. All you have to do is to turn the key off / key on Smarty does everything else on its own.

The CaTCHER software as they are today is only a starting point. Expect major news in the future. We’re for your feedback, opinions, likes, and dislikes… We will make Smarty do what YOU want, TOGETHER.



  • CaTCHER software’s inside
  • Ten different performance levels.
  • Fastest download in the industry, up to three times faster than the
    competition, a typical ECM update takes about 3.5 to 5 minutes,
    depending on the truck model.
  • ABS tire height updates in just a few seconds.
  • Not traceable in the stock setting. Smarty leaves no footprint.
  • Manual High Idle is enabled in all software
  • Reads  Diagnostic Trouble Codes in plain text.
  • No tools are required, and no fuses to pull.
  • USB built-in for simple updates.
  • Most complete keyboard in the industry.
  • Reliable, it works off your OEM hardware.
  • Programmable Speed Limiter from 25 to 250 mph
  • Smart Tuners WILL NOT delete the DPF/EGR

5.9L 24V Cummins




2003, 2004, 2004.5, 2005, 2006, 2007

We have a number of Home Delivery services available to you. Availability of these options will be shown at checkout.

Delivery Service Price
Flat Rate $12.99

Customers reviews

There are no reviews yet.

Be the first to review “Mads Smarty POD Tuner”

Your email address will not be published. Required fields are marked *

Product has been added to your cart