EVOLUTION DRILLED/SLOTTED ZINC PLATED ROTORS (PAIR)
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Improve Stopping Distance w/ More Pad Bite
- Tru-Cast Precision Machined For Exact OE Fit
- Oversized Drill Holes Reduce Brake Temperature
- Counter-Sunk To Resist Stress Risers And Cracking
- Improved Wet Weather Braking
- Corrosion Resistant Gold Zinc Plating
- Get More Pad Bite And Increased Safety
- Decreased Brake Fade Pulsation And Wear
Information:
Improve Stopping Distance With More Pad Bite; Tru-Cast Precision Machined For Exact OE Fit; Oversized Drill Holes Reduce Brake Temperature; Counter-Sunk To Resist Stress Risers And Cracking; Improved Wet Weather Braking; Corrosion Resistant Gold Zinc Plating; Get More Pad Bite And Increased Safety; Decreased Brake Fade Pulsation And Wear
Application Summary:
| Year |
Make/Model |
| 1988-1995 |
Buick Regal |
| 1990-1995 |
Chevrolet Lumina |
| 1995 |
Chevrolet Monte Carlo |
| 1989-1995 |
Oldsmobile Cutlass Supreme |
| 1988-1996 |
Pontiac Grand Prix |
| Attributes |
| ABS Tone Ring Included |
No |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Construction |
Full Cast |
| Country of Origin (Primary) |
CN |
| Discard Thickness |
0.97 in., 24.70 mm |
| Emission Code |
Legal US |
| GTIN |
00792088551566 |
| Harmonized Tariff Code (Schedule B) |
8708305030 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| Mounting Bolt Hole Circle Diameter |
114.30 mm, 4.50 in. |
| NAFTA Preference Criterion Code |
B |
| Nominal Thickness |
24.70 in., 26.30 mm |
| Outside Diameter |
10.50 in., 267.00 mm |
| Overall Height |
1.40 in., 35.00 mm |
| Position |
Front |
| Rust Resistant Coating |
Yes |
| SDR Required Flag |
N |
| Solid Or Vented Type Rotor |
Vented |
| Stud/Lug Hole Quantity |
5 |
| Style |
Drilled And Slotted |
| Surface Type |
Slotted X Drilled |
| Warranty Time |
90 |
