Mishimoto High-Pressure 1.3 Bar Radiator Cap Small
Getting the most out of your performance parts comes down to the details. When faced with hard driving conditions, a vehicle's cooling system becomes highly pressurized. Stock caps are not equipped to handle higher pressure, causing fluid to leak out into the overflow reservoir. The Mishimoto High-Pressure 1.3 Bar Radiator Cap will keep coolant where it needs to be flowing within the system. This cap fits most import vehicles.
Getting the most out of your performance parts comes down to the details. When faced with hard driving conditions, a vehicle's cooling system becomes highly pressurized. Stock caps are not equipped to handle higher pressure, causing fluid to leak out into the overflow reservoir. The Mishimoto High-Pressure 1.3 Bar Radiator Cap will keep coolant where it needs to be flowing within the system. This cap fits most import vehicles.
- 1.3 bar (19 psi) high-pressure radiator cap raises the boiling point of engine coolant to provide a safer and more efficient cooling system
- Ergonomically designed for easy removal and installation
- Works with most expansion tanks and radiators that require small radiator cap
| Attributes | |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color | Black, Black |
| Country of Origin (Primary) | CN |
| Finish | Anodized, Anodized |
| GTIN | 00748354012132 |
| Harmonized Tariff Code (Schedule B) | 8708917550 |
| Hazardous Material Code | N |
| Install Difficulty | 1 |
| Installation Difficulty | 1, 1 |
| Life Cycle Status Code | Available to Order |
| Material | Steel, Steel |
| NAFTA Preference Criterion Code | B |
| SDR Required Flag | N |
| SellingPoint01 | 1.3 bar (19 psi) high-pressure radiator cap raises the boiling point of engine coolant to provide a safer and more efficient cooling system |
| SellingPoint02 | Ergonomically designed for easy removal and installation |
| SellingPoint03 | Works with most expansion tanks and radiators that require small radiator cap |
| SellingPoint04 | Fits most import vehicles |
| SellingPoint05 | Patent number ZL 201430261199.4 |
| SellingPoint06 | Mishimoto Lifetime Warranty |
| SellingPoint07 | N/A |
| SellingPoint08 | N/A |
| SellingPoint09 | N/A |
| SellingPoint1 | Patent Pending |
| SellingPoint10 | N/A |
| SellingPoint11 | N/A |
| SellingPoint12 | N/A |
| SellingPoint13 | N/A |
| SellingPoint14 | N/A |
| SellingPoint15 | N/A |
| SellingPoint2 | 1.3 bar (19 psi) high-pressure radiator cap raises the boiling point of engine coolant to provide a safer and more efficient cooling system |
| SellingPoint3 | Ergonomically designed for easy removal and installation |
| SellingPoint4 | Works with most expansion tanks and radiators that require small radiator cap |
| SellingPoint5 | Fits most import vehicles |
| SellingPoint6 | Patent numberZL 201430261199.4 |
| SellingPoint7 | Mishimoto Lifetime Warranty |
| SellingPoint8 | N/A |
| SellingPoint9 | N/A |
| TechSpec Applications | 31-32mm Fill Necks |
| TechSpec Diameter (Inches) | N/A |
| TechSpec Engine Codes | N/A |
| TechSpec Includes | N/A |
| TechSpec Installation Notes | N/A |
| TechSpec Length (Inches) | N/A |
| TechSpec Material | N/A |
| TechSpec Maximum Pressure (PSI) | 19 |
| TechSpec Maximum Temperature (F) | N/A |
| TechSpec Minimum Yield Strength | N/A |
| TechSpec Note | This product will not fit on stock KTM Radiators. -- Ensure that you measure your radiator fill neck for proper cap fitment; locate the circular opening on top of your radiator. Clean the area, then measure the diameter (in millimeters) using a ruler or caliper. Compare this measurement to radiator cap sizes to select the correct fit. |
| TechSpec Overall Height (Inches) | N/A |
| TechSpec Thread Size | N/A |
| TechSpec Ultimate Tensile Strength | N/A |
| TechSpec Weight (Ounces) | N/A |
Mishimoto MMRC-13-SM Mishimoto High-Pressure 1.3 Bar Radiator Cap Small
Product Information
- Brand: Mishimoto
- Product Number: MMRC-13-SM