Cat-Back Exhaust, fits Ford Mustang EcoBoost 2015-2023
Pump up the volume of your 2015-2023 Ford Mustang EcoBoost exhaust! The utilization of twin oval mufflers and larger diameter piping makes for a nice increase in volume and tone without any increased drone. The full 304 stainless steel, mandrel-bent construction provides optimal flow to free up some power in that 4 cylinder turbo engine. The engineering team went through a few different tip designs before settling on these classic oval mufflers that provide a sweet tone with no added drone. The dual 4.5in double wall polished tips will be sure to give your opponent a nice view at the local drag strip. The Mishimoto 2015-2023 Ford Mustang EcoBoost Mustang exhaust fits both manual and automatic transmission vehicles, and just like all Mishimoto 2015-2023 Ford Mustang EcoBoost parts, comes with the Mishimoto Lifetime Warranty.
- Specially-selected oval mufflers for a subtle, yet aggressive turbo and exhaust tone under acceleration and boost with no added drone
- Designed with minimal bends for optimal airflow
- Dual 4.5-in double wall, polished tips
Application Summary:
| Year |
Make/Model |
| 2015-2021 |
Ford Mustang |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color |
Stainless Steel |
| Country of Origin (Primary) |
CN |
| Finish |
Raw |
| GTIN |
00748354024890 |
| Hazardous Material Code |
N |
| Install Difficulty |
3 |
| Installation Difficulty |
3 |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel |
| NAFTA Preference Criterion Code |
B |
| SDR Required Flag |
N |
| SellingPoint01 |
Direct fit for the 2015-2023 Ford Mustang EcoBoost |
| SellingPoint02 |
Specially-selected oval mufflers for a subtle, yet aggressive turbo and exhaust tone under acceleration and boost with no added drone |
| SellingPoint03 |
Designed with minimal bends for optimal airflow |
| SellingPoint04 |
Dual 4.5-in double wall, polished tips |
| SellingPoint05 |
Full 304 stainless steel mandrel-bent construction |
| SellingPoint06 |
Modular center section with optional 3-in downpipe to exhaust adapter for easy mating to the Mishimoto Mustang EcoBoost Downpipe |
| SellingPoint07 |
Mates with stock, or most aftermarket downpipes |
| SellingPoint08 |
Fits both manual and automatic transmissions with no additional adapters or brackets |
| SellingPoint09 |
TIG-welded to perfection |
| SellingPoint1 |
Direct fit for the 2015+ Ford Mustang EcoBoost |
| SellingPoint10 |
3-in to 2.5-in exhaust split helps maintain proper exhaust velocity |
| SellingPoint11 |
Mishimoto Lifetime Warranty |
| SellingPoint12 |
N/A |
| SellingPoint13 |
N/A |
| SellingPoint14 |
N/A |
| SellingPoint15 |
N/A |
| SellingPoint2 |
Specially-selected oval mufflers for a subtle, yet aggressive turbo and exhaust tone under acceleration and boost with no added drone |
| SellingPoint3 |
Designed with minimal bends for optimal airflow |
| SellingPoint4 |
Dual 4.5-in double wall, polished tips |
| SellingPoint5 |
Full 304 stainless steel mandrel-bent construction |
| SellingPoint6 |
Modular center section with optional 3-in downpipe to exhaust adapter for easy mating to the Mishimoto Mustang EcoBoost Downpipe |
| SellingPoint7 |
Mates with stock, or most aftermarket downpipes |
| SellingPoint8 |
Fits both manual and automatic transmissions with no additional adapters or brackets |
| SellingPoint9 |
TIG-welded to perfection |
| TechSpec Applications |
2015-2023 Ford Mustang EcoBoost |
| TechSpec Chassis Codes |
S-550 |
| TechSpec Engine Codes |
2.3L EcoBoost |
| TechSpec Includes |
(1) Stainless Steel Front Pipe w/ Slip Joint connection--(1) Stainless Steel Y Pipe w/ Slip Joint connections--(2) Stainless Steel Mufflers w/ Single 4.0-inch Double Wall Tips, Polished--(1) 3.0-inch Slip Joint Clamp--(2) 2.25-inch Slip Joint Clamps--Mishimoto Lifetime Warranty |
| TechSpec Material |
304 Stainless Steel |
| TechSpec Note |
This exhaust will only mate to the stock downpipe or aftermarket downpipe with a 2.25-inch outlet. Mishimoto has not verified fitment with all aftermarket full 3-inch downpipes.----This will not fit convertible model unless the underbody brace is removed prior to installation |
| TechSpec Overall Height (Inches) |
N/A |
| TechSpec Overall Length (Inches) |
N/A |
| TechSpec Overall Width (inches) |
N/A |
| TechSpec Pipe Diameter |
3 |
| TechSpec Weight (Pounds) |
N/A |
