Hushmat Custom Vehicle Sound Deadening and Thermal Insulation Trunk Kit treats the floor, rear quarter panels and trunk lid.
The 356 trunk is cavernous and metal. The front end trunk generates a drum effect and noise that can enter the interior. The HushMat trunk kit is designed to eliminate this drum effect and keep the interior quiet. The HushMat trunk kit is enough material to sound deaden the trunk floor, front wheel wells and trunk lid.
- Eliminates Road Noise and Vibration
- Reduces Heat Up To 40 Percent
- Automotive OEM Specified and Approved
- HushMat Ultra Requires No Pre-cleaning Of The Application Surface
- No More Acetone Or Alcohol Surface Preparation
- HushMat Ultra Requires No Heat Guns Or Messy Glue To Apply
- One-Step Application With HushMat Ultra-Simply Peel and Stick
- Proven To Perform From -30 F To 550 F
- Manufactured in the USA for Over 25 years
Information:
Reduce that aftermarket engine, exhaust drone, road noise, vibration and the noise that disrupts your ride and reduce the heat that comes from engine, headers, exhaust and catalytic converter with one USA Made material light weight HushMat Ultra
Application Summary:
| Year |
Make/Model |
| 1948-1955 |
Porsche 356 |
| Attributes |
| California Proposition 65 |
No |
| Cold Flexibility |
Can be bent around 25 mm. mandrel at -30 degrees C with no cracking or loss of adhesion |
| Color |
Polymer - Black; Backing - Silver |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Flammability |
Tested per FMVSS 302, HushMat Ultra is self-extinguishing and meets all aspects of the standard |
| GTIN |
00881101801549 |
| Hardness |
6.5 - 9.0mm ?ASTM D-5 |
| Harmonized Tariff Code (Schedule B) |
4008210000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
C |
| Peel Strength |
Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported. |
| R-Value |
7 |
| SDR Required Flag |
N |
| SDS Sheet Number |
NA |
| Safety |
HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product. |
| Shelf Life |
At least 6 months when stored at 40 degrees C or less |
| Specific Gravity |
1.47 (approx. 0.47 pounds per square foot) |
| Temperature Resistance |
HUSHMAT ULTRA will withstand a bake of 1 hour at 240 degrees C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions. |
| Thickness |
1.5mm |
