Hushmat Year, Make and Model Floor Sound Deadening and Thermal Insulation Kit covers 100 percent of your vehicles floor from the pedals back to the rear seat including the transmission tunnel
The 356 Porsche was designed for exceptional handling and high speeds. There is no doubt this is a marquee feature of the 356. However in order to accomplish this the vehicle was built low to the ground which increases the transfer of noise, road noise and vibrations through the floor pan. The HushMat floor kit treats the vehicle from the toe pan all the way back to the rear seat, waterfall area. HushMat?s lightweight and flexible technology forms easily to the ribs, and deep draw areas of the floor pan insulating 100 percent of this area. The floor is a major transfer point for noise and heat. HushMat dramatically improves the drive and ride quality experience in the 356. Best of all it performs and is hidden under the carpet and other interior panels.
- Reduce Heat Up to 40 Percent; Reduce Noise Up to 50 Percent
- Sound and Thermal Insulation from One Product
- Eliminate Road Noise; Engine Noise; Vibration; Insulate Interior
- Automotive OEM Specified and Approved
- Requires No Pre-cleaning Of The Application Surface
- No More Acetone Or Alcohol Surface Preparation
- One-Step Application With HushMat Ultra-Simply Peel and Stick
- Proven To Perform From -30 F To 550 F
- Manufactured in the USA for Over 25 years
Information:
Reduce that aftermarket engine, exhaust drone, road noise, vibration and the noise that disrupts your ride and reduce the heat that comes from engine, headers, exhaust and catalytic converter with one USA Made material light weight HushMat Ultra
Application Summary:
| Year |
Make/Model |
| 1948-1955 |
Porsche 356 |
| Attributes |
| California Proposition 65 |
No |
| Cold Flexibility |
Can be bent around 25 mm. mandrel at -30 degrees C with no cracking or loss of adhesion |
| Color |
Polymer - Black; Backing - Silver |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Flammability |
Tested per FMVSS 302, HushMat Ultra is self-extinguishing and meets all aspects of the standard |
| GTIN |
00881101801518 |
| Hardness |
6.5 - 9.0mm ?ASTM D-5 |
| Harmonized Tariff Code (Schedule B) |
4008210000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
C |
| Peel Strength |
Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported. |
| R-Value |
7 |
| SDR Required Flag |
N |
| SDS Sheet Number |
NA |
| Safety |
HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product. |
| Shelf Life |
At least 6 months when stored at 40 degrees C or less |
| Specific Gravity |
1.47 (approx. 0.47 pounds per square foot) |
| Temperature Resistance |
HUSHMAT ULTRA will withstand a bake of 1 hour at 240 degrees C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions. |
| Thickness |
1.5mm |
