Hushmat Year, Make and Model Floor Sound Deadening and Thermal Insulation Kit covers 100 percent of your vehicles floor from the pedals back to the rear seat including the transmission tunnel
Excellent engineering, power, performance, and style are earmarks of your European car. HushMat sound deadening and thermal insulation enhances the floor pan with the easiest to install sound deadening material. Your vehicle is built very low to the road! Road noise penetrates the interior constantly. Hear the difference when you drive on a freshly paved asphalt surface and then it changes to a concrete surface. The sound is excessive. HushMat is the solution to road noise.
- Reduce Heat Up to 40 Percent; Reduce Noise Up to 50 Perfect
- Proven To Perform From -30 F To 550 F
- Manufactured in the USA for Over 25 years
- Eliminates Noise from Rain and Wind
- Reduces Radiant Heat from the Sun
- Automotive OEM Specified and Approved
- HushMat Ultra Requires No Pre-cleaning Of The Application Surface
- No More Acetone Or Alcohol Surface Preparation
- Ultra is 1.5mm and Lightweight at 0.47 lbs. Per Square Foot
- HushMat Ultra Requires No Heat Guns Or Messy Glue To Apply
- One-Step Application With HushMat Ultra-Simply Peel and Stick
Information:
Reduce that aftermarket engine, exhaust drone, road noise, vibration and the noise that disrupts your ride and reduce the heat that comes from engine, headers, exhaust and catalytic converter with one USA Made material light weight HushMat Ultra
Application Summary:
| Year |
Make/Model |
| 1962-1981 |
MG MGB |
| Attributes |
| Add-On Part |
None |
| California Proposition 65 |
No |
| Cold Flexibility |
Can be bent around 25 mm. mandrel at -30 degrees C with no cracking or loss of adhesion |
| Color |
Polymer - Black; Backing - Silver |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Flammability |
Tested per FMVSS 302, HushMat Ultra is self-extinguishing and meets all aspects of the standard |
| GTIN |
00881101701016 |
| Hardness |
6.5 - 9.0mm ?ASTM D-5 |
| Harmonized Tariff Code (Schedule B) |
4008210000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
B |
| Peel Strength |
Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported. |
| R-Value |
7 |
| SDR Required Flag |
N |
| SDS Sheet Number |
NA |
| Safety |
HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product. |
| Shelf Life |
At least 6 months when stored at 40 degrees C or less |
| Specific Gravity |
1.47 (approx. 0.47 pounds per square foot) |
| Temperature Resistance |
HUSHMAT ULTRA will withstand a bake of 1 hour at 240 degrees C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions. |
| Thickness |
1.5mm |
