For Pro-Billet Distributor or Magnetic Crank Trigger to Sniper 2
Provide RPM signal to the ECU for your Sniper 2 while using timing control. With two wires, it's quick and easy to install in your vehicle. Requires connection to Ignition Coil Driver, such as CD Ignition Box, to control timing.
Provide RPM signal to the ECU for your Sniper 2 while using timing control. With two wires, it's quick and easy to install in your vehicle. Requires connection to Ignition Coil Driver, such as CD Ignition Box, to control timing.
- Add RPM signal
- Two wire installation
- Used on a Pro-Billet Distributor or Magnetic Crank Trigger to Sniper 2
- Black connector with purple and green wire
Information:
Plugs into the connector labeled "IGNITION" on the main harness. The yellow/black lead connects to the "Tach Out" terminal of the ignition box, do not connect directly to the ignition coil. Plese refer to the installation instructions for more information.| Attributes | |
| Brand | Holley EFI |
| Category | Ignition |
| Color | Black |
| Country of Origin (Primary) | US |
| Emission Code | 3, 3, Off Road |
| End 1 Connector Gender | Female |
| End 2 Connector Gender | Female |
| Grade Type | Performance |
| Harmonized Tariff Code (Schedule B) | 8409915085 |
| Harness Type | Ignition |
| Hazardous Material Code | N |
| Ignition Adapter | Pro-Billet/Crank Trigger Adapter |
| Ignition Type | CD Ignition (No Timing Control) |
| Life Cycle Status Code | Available to Order |
| part type | Ignition Harness |
| Product Type | Ignition Harnesses |
| SDR Required Flag | N |
| Sub Category | Ignition Wire and Related Components |
| Warning | California Proposition 65 |
| Wire Quantity | 2 |
| GTIN | 00090127788073 |