PICO/EV6 - 36 lb/hr - High Impedance
Sniper EFI Fuel Injectors feature a precision lapped disc valve, high-quality brass windings, and high-temp O-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors.
Sniper EFI Fuel Injectors feature a precision lapped disc valve, high-quality brass windings, and high-temp O-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors.
- PICO/EV6 style performance injector
- High impedance (12.2 Ohms) for use with saturated drivers
- Rated injector flow: 36 lb/hr @ 43 PSI
- Supports up to 575 horsepower (set of 8)
- Tri-cone spray pattern
Information:
Designed for use in setups with a 38mm distance between the o-ring seats on the fuel rail and intake manifold (commonly referred to as an "LS3-Style" injector), this injector features a USCAR connector and 14mm o-rings on both ends. It is an ideal fit for Holley EFI Intake manifolds that include fuel rail brackets for shorter LS3/LS7 length injectors. However, when used in an intake manifold designed for factory LS3/LS7 injectors, the bottom o-ring needs to be replaced to ensure proper fitment.| Attributes | |
| Body Diameter | 0.65 |
| Body Length | 1.85" |
| Body Style | EV6 |
| Brand | Holley EFI |
| California Proposition 65 | No |
| Category | Air and Fuel Delivery |
| Connector Series | EV6, EV6 |
| Country of Origin (Primary) | CN |
| Emission Code | 4, 4, Off Road |
| Flow Matched | No |
| Flow Rate | 36, 36 |
| Fuel Rate | 36 lbs./hr |
| Fuel Type | E-85, Gasoline, E-85, Gasoline |
| Gasket Or Seal Included | Yes, Yes |
| Grade Type | Performance, Performance |
| Harmonized Tariff Code (Schedule B) | 8409915085 |
| Hazardous Material Code | N |
| Impedance | High (12.2 Ohm), High (12.2 Ohm) |
| Life Cycle Status Code | Available to Order |
| NAFTA Preference Criterion Code | B |
| O-Ring Quantity | 2 per injector |
| O-Ring to O-Ring | 1.421, 1.421 |
| part type | Fuel Injector, Fuel Injector |
| Product Type | Fuel Injector, Fuel Injector |
| Qty | 1 |
| Rated Injector Flow | 36 lb/hr, 36 lb/hr |
| Sale Category | Air and Fuel Delivery |
| SDR Required Flag | N |
| Sub Category | Fuel Injection System and Related Components, Fuel Injection System and Related Components |
| Terminal Gender | Male, Male |
| Terminal Quantity | 1, 1 |
| Terminal Type | Blade, Blade |
| Warning | California Proposition 65, California Proposition 65 |
| Wiring Harness Included | No, No |
| GTIN | 00090127052181 |