Fits 1973-1978 GM C10 Trucks
*See Holley Part # 320-323 for 1979-1987 C10 Steering Shaft
- Complete bolt-on solution with little or no modifications necessary depending on use
- Eliminates factory rag joint providing a precise and responsive steering input
- Will also work as a factory replacement steering shaft
- E-Coat for maximum protection against corrosion
- Steel construction with retaining screws on the bearing caps for strength and durability
Information:
It is extremely important that these steering shafts are installed by a qualified technician. Failing to do so will result in an unsafe vehicle.
If installing these shafts with an OE steering box, you may need to trim the pin on the input shaft for U-joint clearance.
Loctite 242, extra grease, and a torque wrench are highly recommended!!!
Application Summary:
| Year |
Make/Model |
| 1975-1978 |
Chevrolet C10 |
| 1973-1974 |
Chevrolet C10 Pickup |
| 1975-1978 |
Chevrolet C10 Suburban |
| 1975-1978 |
GMC C15 |
| 1975-1978 |
GMC C15 Suburban |
| 1973-1974 |
GMC C15/C1500 Pickup |
| 1973-1974 |
GMC C15/C1500 Suburban |
| Attributes |
| Application |
1973-1978 GM C10 Trucks |
| Brand |
Holley |
| Category |
Steering |
| Country of Origin (Primary) |
CN |
| Dust Boot Included |
Yes |
| Emission Code |
5 |
| GTIN |
00090127478349 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| Product Type |
Steering Shafts |
| SDR Required Flag |
N |
| Shaft Diameter |
1 in. DD |
| Shaft End 1 |
3/4 in. 30-Spline x 3/4 in. DD |
| Shaft End 2 |
1 in. 48-Spline x 1 in. DD |
| Shaft Length 1 |
3/4 in. DD x 10.75 in. Long |
| Shaft Length 2 |
1 in. DD x 10.75 in. Long |
| Sub Category |
Steering, Gear and Related Components |
| Warning |
California Proposition 65 |
| part type |
Steering Shaft |
