255 LPH Drop-In Retrofit Carbureted Fuel System Supports up to 700 Carb HP (HP Rating @ 6 PSI at 13.5 Volts / 10.4 AMP Draw)
Supports up to 700 Carb HP (@ 6 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, fuel cell location, etc...
Supports up to 700 Carb HP (@ 6 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, fuel cell location, etc...
- The easiest way to convert your vehicle to an in-tank fuel system
- Installs in any fuel tank from 6.5” to 12” deep to fit a wide variety of applications
- The low profile 5 inch diameter design is only 1.275 inches thick above the tank mounting surface for added clearance when needed
- The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit
- The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride
- Die cast aluminum construction for corrosion resistance and long lasting good looks
- ¼” NPT ports for a wide variety of plumbing options
Information:
It is recommended to use a Holley 12-753 30 Amp Fuel Pump Relay along with a minimum size of 12 Gauge wire for your installation.| Attributes | |
| Application | Universal, Universal |
| Average Current Draw | 10.4 |
| Average Flow Rating | 255 |
| Brand | Holley, Holley |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category | Air and Fuel Delivery |
| Connector Color | Black |
| Connector Gender | Male |
| Connector Quantity | 1 |
| Country of Origin (Primary) | US |
| Diameter | 4.8", 4.8" |
| Emission Code | 5, 3 |
| Free Flow GPH | 67, 67 |
| Free Flow LPH | 255, 255 |
| Fuel Filter Included | Yes |
| Fuel Sending Unit Included | No |
| Fuel System Type | Gasoline, Gasoline |
| Fuel Tank Pressure Sensor Included | No |
| Fuel Type | Gasoline, Gasoline |
| GTIN | 00090127061282 |
| Gasket Or Seal Included | Yes |
| Gasket Or Seal Material | Foam |
| Grade Type | Performance |
| Harmonized Tariff Code (Schedule B) | 8413301000 |
| Hazardous Material Code | N |
| Height | Adjustable, Adjustable |
| Housing Material | Aluminum |
| In Tank or External | In Tank |
| Inlet Fitting Thread Size | 1/4 |
| Inlet Quantity | One, One |
| Inlet Type | NPT |
| Internal Or External Strainer | External |
| Life Cycle Status Code | Available to Order |
| Lock Ring Included | Yes |
| Material | Die Cast Aluminum, Die Cast Aluminum |
| Maximum Pressure | 6 |
| Mounting Hardware Included | Yes |
| NAFTA Preference Criterion Code | B |
| NPT Thread | 1/4 NPT, 1/4 NPT |
| Negative Ground | Yes |
| Outlet Fitting Thread Size | 1/4 |
| Outlet Quantity | One, One |
| Outlet Type | NPT |
| Product Type | Fuel Pump, Fuel Pump |
| Pump Type | Electric |
| Regulator Included | Yes |
| SDR Required Flag | N |
| Sale Category | Air and Fuel Delivery |
| Sub Category | Fuel Pumps and Related Components |
| Top Mount Diameter | 5 |
| Universal Or Specific Fit | Universal |
| Voltage | 12 |
| Warning | California Proposition 65, California Proposition 65 |
| Warranty | Limited 90 Day, Manufacturer's Limited 90 Day Warranty |
| Wire Harness Included | Yes |
| Wire Quantity | 2 |
| part type | Fuel Pump Module Assembly |
Holley 12-129 Holley Diecast In-Tank Carbureted RetroFit Fuel Pump Module-Returnless System
Product Information
- Brand: Holley
- Product Number: 12-129