Cat-Back Dual Sport Exhaust System; Aluminized
If youre looking to add a little style to your Truck or SUV and want to keep the exhaust from affecting your tow trailer, this Dual Cat back Exhaust System is for you, exiting behind the rear tire for a look that sets your vehicle apart on the street or in the dirt. Hassle free, bolt-on installation with professional looking results. No welding required. Backed by a Lifetime Limited Warranty. Gibson dual sport exhaust offers a powerful authoritative deep exhaust tone with no annoying noise inside the cab. Dyno tested to assure increased horsepower and produce more torque. Average horsepower gains are 10-15 and 15-20lb-ft of increase torque.
- Aluminized Mandrel Bent Tubing
- Superflow™ Muffler
- Baffled/Chambered Muffler; No Internal Packing
- Minimal Interior Drone - Aggressive Sound
- Polished Stainless Round Slash-Cut Clamp On Tips
- Hassle Free Easy Bolt-On Installation
- Incl. All Hardware/Factory Style Hangers
- Lifetime Limited Warranty
Information:
Will not Fit SVT Raptor or Harley Davidson Edition
Application Summary:
| Year |
Make/Model |
| 2015-2023 |
Ford F-150 |
| Attributes |
| Additional Description |
Includes all hardware and factory style hangers for easy bolt on installation. |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Description |
Includes all hardware and factory style hangers for easy bolt on installation. |
| EMISSION CARB # |
50 State Legal California Emissions Compliant |
| Emission Code |
Legal US |
| Exhaust Type |
Dual |
| Exit Position |
Rear |
| Exit Position (F05) |
Exits Behind Rear Tire. |
| Exit Style |
Straight |
| Footnote |
Will not Fit SVT Raptor or Harley Davidson Edition |
| GTIN |
00677418027556 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Size (in.) |
3 |
| Life Cycle Status Code |
Available to Order |
| Material |
304 Stainless Steel |
| Muffler Body Length |
24.000 in. |
| Muffler Body Length (in.) |
24.000 |
| Muffler Dimension |
7 in. Round; 3 in. Center Inlet; 2.50in. Dual Outlet; L-24 in. |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet |
Dual |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Warranty |
Lifetime Limited Warranty |
| SDR Required Flag |
N |
| System Type |
Cat Back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Material |
Aluminized Steel |
| Tip Description |
4in. Polished T304 Stainless Rolled Slash Cut Tip. |
| Tip Description _3_ 80_c _short description_ (F05) |
4in. Polished T304 Stainless; Round; Slash- Cut Tip; Clamp on. |
| Tip Diameter |
4.000 in. |
| Tip Logo |
None |
| Tip Size |
4.0 in. |
| Tip Specification |
Inlet 2.50 in. , Outlet 4.0 in. , L 12 in. |
| Tip Specifications (F05) |
Inlet 2.50 in.; Outlet 4.0 in.; L-12 in. |
| Tubing Diameter |
3.000 in., 3.000 in. |
| Vehicle Category |
Truck & Suv |
