Cat-Back Super Truck Exhaust System; Stainless
Your truck deserves a super serious Performance Exhaust System. Gibson Super Truck Exhaust System offers a loud deep powerful sound with dual tailpipes that exit in front of the rear tires with Stainless Tip. You can expect a race rumble tone with improved acceleration and increased horsepower gains. Typical dyno tested horsepower gains average 10-15 and 15-20lb-ft of increased torque. Hassle free, bolt-on installation. No welding required. Backed by a Lifetime Limited Warranty. Not recommended for towing. Noise level may exceed 95-decibel standard.
- Stainless Steel Mandrel Bent Tubing
- Superflow™ Muffler
- Baffled/Chambered Muffler; No Internal Packing
- Minimal Interior Drone - Aggressive Sound
- Stainless Steel Clampless Sport Truck Tips
- Hassle Free Easy Bolt-On Installation
- Lifetime Limited Warranty
Information:
Mfg after Aug. 2004 Without heat shield
Application Summary:
| Year |
Make/Model |
| 2005-2008 |
Ford F-150 |
| Attributes |
| Additional Description |
Includes all hardware and factory style hangers for easy bolt on installation. |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Description |
Includes all hardware and factory style hangers for easy bolt on installation. |
| EMISSION CARB # |
50 State Legal California Emissions Compliant |
| Emission Code |
Legal US |
| Exhaust Type |
Cat-Back |
| Exit Position |
Front of Rear Tire |
| Exit Position (F05) |
Exits In Front of Rear Tire. |
| Exit Style |
Straight |
| Footnote |
Mfg after Aug. 2004 Without heat shield |
| GTIN |
00677418013887 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Size (in.) |
3 |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel |
| Muffler Body Length |
19.000 in. |
| Muffler Body Length (in.) |
19.000 |
| Muffler Dimension |
7 in. Round Body; 3.00 in. Center Inlet; 2.50 in. Dual Outlets; L-19 in. |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet |
Dual |
| Outlet Outside Diameter |
2.5 |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Warranty |
Lifetime Limited Warranty |
| SDR Required Flag |
N |
| System Type |
Cat Back |
| Tail Pipe Diameter |
2.500 in. |
| Tip Description |
6in. Polished T304 Stainless , Oblong , Slash Cut Tip , Clamp on. |
| Tip Description _3_ 80_c _short description_ (F05) |
6in. Polished T304 Stainless; Oblong; Slash-Cut Tip; Clamp on. |
| Tip Diameter |
6.000 in. |
| Tip Logo |
None |
| Tip Size |
6 in. |
| Tip Specification |
Outlet 6 x 2.75 in. , L 6 in. |
| Tip Specifications (F05) |
Outlet 6 x 2.75 in.; L-6 in. |
| Tubing Diameter |
2.500 in., 2.500 in. |
| Vehicle Category |
Truck & Suv |
