Cat-Back Dual Sport Exhaust System; Stainless
If youre looking to add a little style to your Truck or SUV and want to keep the exhaust from affecting your tow trailer, this Dual Cat back Exhaust System is for you, exiting behind the rear tire for a look that sets your vehicle apart on the street or in the dirt. Hassle free, bolt-on installation with professional looking results. No welding required. Backed by a Lifetime Limited Warranty. Gibson dual sport exhaust offers a powerful authoritative deep exhaust tone with no annoying noise inside the cab. Dyno tested to assure increased horsepower and produce more torque. Average horsepower gains are 10-15 and 15-20lb-ft of increase torque.
- Stainless Steel Mandrel Bent Tubing
- Superflow™ Muffler
- Baffled/Chambered Muffler; No Internal Packing
- Minimal Interior Drone - Aggressive Sound
- Polished Stainless Round Slash-Cut Clamp On Tips
- Hassle Free Easy Bolt-On Installation
- Incl. All Hardware/Factory Style Hangers
- Lifetime Limited Warranty
Information:
Mfg after Aug. 2004; Must remove spare tire if 18in. or Larger
Application Summary:
| Year |
Make/Model |
| 2004-2008 |
Ford F-150 |
| 2006-2008 |
Lincoln Mark LT |
| Attributes |
| Additional Description |
Includes all hardware and factory style hangers for easy bolt on installation. |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Description |
Includes all hardware and factory style hangers for easy bolt on installation. |
| EMISSION CARB # |
50 State Legal California Emissions Compliant |
| Emission Code |
Legal US |
| Exhaust Type |
Cat-Back |
| Exit Position |
Behind Rear Tire |
| Exit Position (F05) |
Exits Behind Rear Tire. |
| Exit Style |
Straight |
| Footnote |
Mfg after Aug. 2004, Must remove spare tire if 18" or Larger |
| GTIN |
00677418012972 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel |
| Muffler Body Length |
24.000 in. |
| Muffler Body Length (in.) |
24 |
| Muffler Dimension |
7 in. Round; 3 in. Center Inlet; 2.50in. Dual Outlet; L-24 in. |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet |
Dual |
| Outlet Outside Diameter |
3.5 |
| Outlet Outside Diameter (in.) |
3.5 |
| Outlet Size (in.) |
3.5 |
| Product Warranty |
Lifetime Limited Warranty |
| SDR Required Flag |
N |
| System Type |
Cat Back |
| Tail Pipe Diameter |
2.500 in. |
| Tip Description |
3.50in. Polished T304 Stainless , Round Slash Cut Tip , Clamp on. |
| Tip Description _3_ 80_c _short description_ (F05) |
3.50in. Polished T304 Stainless; Round Slash- Cut Tip; Clamp on. |
| Tip Diameter |
3.500 in. |
| Tip Logo |
None |
| Tip Size |
3.5 in. |
| Tip Specification |
Inlet 2.50in. , Outlet 3.50in. , L 12in. |
| Tip Specifications (F05) |
Inlet 2.50in.; Outlet 3.50in.; L-12in. |
| Tubing Diameter |
2.500 in., 2.500 in. |
| Vehicle Category |
Truck & Suv |
