Fits 2011-2018 Chevrolet Silverado 1500, GMC Sierra 1500 with 6.2L engine. - Aggressive to moderate sound
The American Thunder® Cat-back exhaust system for 2011-2018 Chevrolet Silverado and GMC Sierra 1500 trucks with the 6.2L engine, is perfect for the person looking for an aggressive exterior sound level while maintaining a moderate interior tone. This bolt-on stainless steel system features a 3.50-inch mandrel-bent inlet pipe flowing into the 50 Series™ HD performance muffler with large 4.00-inch internals and a built-in tuned resonance chamber to minimize interior drone. The system has dual 2.50-inch mandrel-bent tailpipes which use the factory hanger locations and are finished off with large 3.50-inch polished stainless steel tips. This exhaust system gives you choices for tailpipe exit location either out each side behind the rear tires if you do a lot of towing, or straight-out under the rear bumper for a muscular look. The exhaust system is covered by our Lifetime Limited Warranty and includes all necessary parts and hardware for easy installation you can do at home. Note: Fits 2/4 WD model with Crew Cab/Short Bed (143.5" WB), Crew Cab/Standard Bed (153" WB) and Double Cab/Standard Bed (143.5" WB).
- Dyno Tuned For Maximum Performance
- Uses the Factory Hanger Locations
- 50 Series HD Performance Muffler
- Your Choice of Two Tailpipe Exits
- Clears the Factory Spare Tire
- Stainless Steel Construction
- Lifetime Limited Warranty
Information:
Fits 2011-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 with 6.2L engine, 2/4 WD model with Crew Cab/Short Bed (143.5" WB), Crew Cab/Standard Bed (153" WB) and Double Cab/Standard Bed (143.5" WB).
Application Summary:
| Year |
Make/Model |
| 2011-2018 |
Chevrolet Silverado 1500 |
| 2011-2018 |
GMC Sierra 1500 |
| Attributes |
| ASIN |
B01N0IY6QH |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Dyno Tuned For Maximum Performance |
| Bullet Point #3 |
Patented Delta Flow Technology |
| Bullet Point #4 |
Made in the USA |
| CARB (California) Compliant |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No, No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Diameter |
3.50, 3.50 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Length |
13.00 |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
2, 2 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear Same Side, Dual Out Rear / Dual Out Side |
| Exit Style |
Straight |
| Finish |
Natural, Natural |
| GTIN |
00700042035038 |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Inside Diameter |
3.500 in. |
| Inlet Inside Diameter (in.) |
3.5 |
| Inlet Size (in.) |
3.5 |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
409 Stainless Steel |
| Mount Type |
Uses Factory Hangers, Uses Factory Hangers |
| Mounting Bracket Included |
Yes, Yes |
| Muffler Body Height |
5.00 |
| Muffler Body Length |
18.00, 18.00 |
| Muffler Body Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Body Width |
10.00 |
| Muffler Count |
1 |
| Muffler Finish |
Gray |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Diameter |
3.500 in., 3.50 |
| Muffler Inlet Diameter (in) |
3.5 |
| Muffler Inlet Diameter (in.) |
3.500 |
| Muffler Inlet Inside Diameter |
3.50, 3.00 |
| Muffler Inlet Outside Diameter |
3.13, 3.13 |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet Diameter |
2.500 in., 2.50 |
| Muffler Outlet Diameter (in) |
2.5 |
| Muffler Outlet Diameter (in.) |
2.500 |
| Muffler Outlet Quantity |
2, 2 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
1, 1 |
| Muffler Series |
50 Series HD, 50 Series HD |
| Muffler Shape |
Oval |
| Muffler Type |
Welded Baffle, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Sale Category |
Exhaust |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate, Aggressive / Moderate |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tail Pipe Quantity |
2, Dual |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Cut |
Angle |
| Tip Diameter |
3.500 in., 3.50 |
| Tip Diameter (in) |
3.5 |
| Tip Diameter (in.) |
3.5 |
| Tip Edge Style |
Cut |
| Tip Finish |
Polished |
| Tip Length |
13.000 in., 13.00 |
| Tip Length (in) |
13 |
| Tip Length (in.) |
13 |
| Tip Logo |
Embossed, Embossed |
| Tip Material |
304 Stainless Steel, 304 Stainless |
| Tip Quantity |
2 |
| Tip Shape |
Round |
| Tip Size |
3.5 in. |
| Tip Style |
Double wall |
| Tip Type |
Double Wall |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (in) |
2.5 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Type |
Cat-Back, Cat-Back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| part type |
Exhaust System Kit, Exhaust System |
