2010-2013 Chevrolet Camaro SS 6.2L engine. Fits hard top and convertible models without factory ground effects package. - Aggressive sound
This Outlaw system is designed to replace the original rear mounted factory mufflers using factory style connections. With easy-fit in mind, these stainless steel systems are mandrel-bent for maximum performance, include a pair of race-proven Outlaw Series mufflers and are finished off with a pair of large 4.00-inch polished stainless steel tips. The Outlaw systems deliver an ultra aggressive interior and exterior tone this is best suited for the enthusiast who wants the most aggressive sound level available. Like all Flowmaster systems, the benefits include improved throttle response, power and covered by our Lifetime Limited Warranty. Designed for an easy install, these systems use the factory hanger locations, include all necessary parts and hardware for an easy installation. Note: Does Not fit models with dual mode exhaust option.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16 gauge Stainless Steel Tubing
- Large 4.00-inch Polished Stainless Steel Tips
- Aggressive Exterior & Interior Exhaust Note
- Lifetime Limited Warranty
Information:
Fits 2010-2013 Chevrolet Camaro SS with 6.2L engine. Fits hard top and convertible models without factory ground effects package. Does Not fit models with dual mode exhaust option.
Application Summary:
| Year |
Make/Model |
| 2010-2013 |
Chevrolet Camaro |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B005CUG412 |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Aggressive Sound Exterior Exhaust Tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Axle-back System |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Outlaw |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042024490 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Count |
2 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Outlaw Delta Force, Outlaw |
| Muffler Type |
Straight-Through |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Outlaw Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Aggressive |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle Back, Axle-back |
| Tail Pipe Diameter |
2.500 in. |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Quantity |
2 |
| Tip Size |
4.0 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (in) |
3 |
| Type |
Axle-Back |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
