Fits 2011-2014 Ford Mustang with 3.7L engine. - Moderate sound
Wake up the performance and sound hidden in your 3.7L V6-powered 2011-2014 Ford Mustang with a Flowmaster Force II® exhaust system. These moderate sounding systems retain the dual exhaust system outlets and are designed to replace the original rear mounted mufflers using factory hangers and connections. With easy fit in mind, these systems are mandrel-bent stainless steel for maximum performance and include specially tuned pair of 60 Series™ performance mufflers with large 3.50-inch polished stainless steel tips. As a Force II system, it delivers a moderate exterior tone and a mild interior tone and is suited to the enthusiast who wants a subtle but distinctive performance exhaust note. Like all Flowmaster® systems, the benefits include improved throttle response, power and mileage. The exhaust is a true bolt-on system, includes everything you need to easily install at home with basic hand tools and is covered by our Lifetime Limited Warranty.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16 Gauge Stainless Steel Tubing
- Dyno Tuned for Maximum Performance
- Moderate Exterior Exhaust Tone
- 60 Series Performance Mufflers
- Lifetime Limited Warranty
- Uses the Factory Hangers
Information:
Fits 2011-2014 Ford Mustang with 3.7L V6 engine.
Application Summary:
| Year |
Make/Model |
| 2011-2014 |
Ford Mustang |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B003Z4HH36 |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Force II |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042024209 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.250 in., 2.25 |
| Inlet Diameter (in) |
2.25 |
| Inlet Inside Diameter |
2.250 in. |
| Inlet Inside Diameter (in.) |
2.25 |
| Inlet Size (in.) |
2.25 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/4 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Count |
2 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
60 Series Delta Flow |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.250 in. |
| Outlet Outside Diameter (in.) |
2.25 |
| Outlet Size (in.) |
2.25 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle Back, Axle-back |
| Tail Pipe Diameter |
2.250 in. |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Quantity |
2 |
| Tip Size |
4.0 in. |
| Tubing Diameter |
2.250 in., 2.25 |
| Tubing Diameter (in) |
2.25 |
| Type |
Axle-Back |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
