2010-2015 Chevrolet Camaro with 3.6L engine - Aggressive sound
Enhance the power, the sound and the look of your 2010-2015 Camaro 3.6L with this American Thunder axle-back exhaust system. Features include all mandrel-bent 2.50-inch stainless steel tubing, a pair of Super 44 Series performance mufflers for a deep powerful sound and uses the factory hanger locations for a quick and easy installation. The system is finished off with a pair of highly polished large 4.00-inch stainless steel tips embossed with the Flowmaster logo, and has a deep aggressive exterior tone with a moderate interior sound level. Includes easy to follow instructions and all necessary hardware for an easy at home installation. Note: Requires cutting of the factory system. Does Not fit Convertibles.
- Includes Hangers and Hardware for an Easy Installation
- Large 4.00-inch Polished 304 Stainless Steel Tips
- Mandrel-bent 16-gauge Stainless Steel Tubing
- Aggressive Sound Exterior Exhaust Tone
- Dyno Tuned for Maximum Performance
- Super 44 Series Performance Mufflers
- Uses the Factory Hanger Locations
- Lifetime Limited Warranty
Information:
Fits 2010-2015 Chevrolet Camaro with a 3.6L engine. Does Not fit Convertibles.
Application Summary:
| Year |
Make/Model |
| 2010-2015 |
Chevrolet Camaro |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B0035J83EI |
| Attachment Method |
Clamp-On, Clamp On |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Aggressive Sound Exterior Exhaust Tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
American Thunder |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042023684 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Count |
2 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
40 Series Classic |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Aggressive |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle Back, Axle-back |
| Tail Pipe Diameter |
2.500 in. |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Quantity |
2 |
| Tip Size |
4.0 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (in) |
2.5 |
| Type |
Axle-Back |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
