Fits 1967-1981 Chevrolet Camaro/Pontiac Firebird, 1968-1974 Chevrolet Nova. 2.50 in. Stainless Steel
These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge stainless steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 842546 (Super 44 Series) or 842551 (50 Series) stainless steel mufflers. Covered by our Lifetime Limited Warranty. Note: Not designed to fit in factory bumper cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
- Exits Straight-out under the Rear Bumper
- Mandrel-bent for Maximum Performance
- High Clearance around Rear Differential
- Designed for Side Inlet/Center Outlet Mufflers
- 16 Gauge Stainless Steel Tubing
- Does Not Include Hardware
- Lifetime Limited Warranty
Information:
Fits 1967-1981 Chevrolet Camaro/Pontiac Firebird, 1968-1974 Chevrolet Nova. Use with Side Inlet/Center Outlet mufflers.
Application Summary:
| Year |
Make/Model |
| 1967-1973 |
Chevrolet Camaro |
| 1975-1981 |
Chevrolet Camaro |
| 1968 |
Chevrolet Chevy II |
| 1969-1973 |
Chevrolet Nova |
| 1967-1981 |
Pontiac Firebird |
| Attributes |
| ASIN |
B005HTLZ3U |
| Automotive Item Grade |
High Performance |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge 409 stainless tubing |
| Bullet Point #2 |
Exits at rear of vehicle |
| Bullet Point #3 |
Compact design |
| Bullet Point #4 |
Premium Flowmaster quality |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Exhaust |
| Clamping Type |
Round Band |
| Color |
Gray |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exit Position |
Dual Rear, Dual Rear Exit |
| Finish |
Natural |
| Fitment |
Direct OE Replacement, Direct Fit |
| GTIN |
00700042024995 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Overall Length |
65.250 in., 65.25 |
| Overall Length (in) |
65.25 |
| Overall Length (in.) |
65.250 in. |
| Position |
N/A |
| Product Type |
Exhaust Accessories |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Builder Accessories |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Miscellaneous Exhaust |
| Tube Diameter |
2.5 inch, 2.50 |
| Tubing Diameter |
2.50 |
| Tubing Diameter (in) |
2.5 |
| Type of Exhaust |
Tail Pipe Kit |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust Tail Pipe |
