2020-2025 Jeep Gladiator JT 3.6L Flow FX Extreme Stainless Steel 3.0" Cat-Back System
Flowmaster introduces our new Flow FX Extreme stainless steel cat-back exhaust system for the 2020-2025 Jeep Gladiator JT with the 3.6L engine. This system uses a Flow FX series muffler for a deep powerful sound and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing is used for maximum exhaust flow and durability. The system has a turndown style dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps to improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster's Lifetime Limited Warranty.
- FlowFX series performance muffler offers a deep powerful sound and increased performance
- 409 stainless steel construction delivers extra durability and improved long-term corrosion resistance
- Uses factory hanger locations for easy installation
- 3.0-inch 16-gauge mandrel bent stainless steel tubing helps maintain maximum exhaust flow for better power
- Includes all necessary hardware for an at home installation
- Dump style exit allows for better ground clearance when in extreme off-road conditions
- Lifetime Limited Warranty
Information:
Holley Performance Emission Code 5: This part is legal for sale or use on Emissions Controlled Vehicles; Uncontrolled (Non-Emissions Controlled) Vehicles; and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations
Application Summary:
| Year |
Make/Model |
| 2020-2025 |
Jeep Gladiator |
| Attributes |
| Brand |
Flowmaster |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
FlowFX |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Diameter |
3.00 |
| Exhaust Type |
Cat-Back |
| Exit Position |
Single, Single Out Dump |
| GTIN |
00090127123874 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Inside Diameter |
3.000 in. |
| Life Cycle Status Code |
Available to Order |
| Material |
409 Stainless Steel |
| Mount Type |
Uses Factory Hangers |
| Muffler Body Diameter |
6.00 |
| Muffler Body Length (in) |
14 |
| Muffler Color |
Natural, Silver |
| Muffler Inlet Diameter |
3.00 |
| Muffler Inlet Diameter (in) |
3 |
| Muffler Inlet Inside Diameter |
3.00 |
| Muffler Inlet Location |
Centered, Center |
| Muffler Inlet Outside Diameter |
3.13 |
| Muffler Material |
409 Stainless Steel |
| Muffler Outlet Diameter |
3.00 |
| Muffler Outlet Diameter (in) |
3 |
| Muffler Outlet Location |
Centered, Center |
| Muffler Overall Length |
42.80 |
| Muffler Overall Length (in) |
42.8 |
| Muffler Part Number |
Kit Only |
| Muffler Series |
FlowFX |
| Muffler Shape |
Round |
| NAFTA Preference Criterion Code |
B |
| Product Type |
Exhaust System |
| SDR Required Flag |
N |
| Series |
FlowFX Extreme Exhaust Kits |
| Single Dual |
Single |
| Sound Level |
Aggressive / Moderate |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00 |
| Tip Diameter |
3, 3.00 |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (in) |
3 |
| Warning |
California Proposition 65 |
| part type |
Exhaust System Kit |
