2004-2008 Ford F-150 & Lincoln Mark LT trucks with a 4.6L or 5.4L engine. - Mild sound
This Flowmaster Force II® Cat-back exhaust system for the 2004-2008 Ford F-150 and Lincoln Mark LT trucks with the 4.6L or 5.4L engines is perfect for the person looking for a deep aggressive exterior sound with a moderate interior tone, and with all of the performance benefits that you would expect from Flowmaster®. This bolt-on DOR/DOS (Dual Out Rear or Dual Out Side) emissions-legal exhaust system features 16-gauge mandrel-bent aluminized steel tubing flowing into a Super 50™ Series performance muffler with dual 2.50-inch aluminized steel tailpipes which use the factory hanger locations for an easy installation. The tailpipes exit either behind the rear wheels, which is ideal for towing, or straight out the back under the rear bumper for a muscular look. The system is finished off with a pair of large 3.00-inch polished stainless steel tips. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home. Note: Fits 2/4 wheel drive models all wheelbases.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16 Gauge Aluminized Steel Tubing
- Mild to Moderate Exterior Exhaust Tone
- Dyno Tuned for Maximum Performance
- Super 50 Series Performance Muffler
- Uses the Factory Hanger Locations
- 3-year Limited Warranty
- Minimal Interior Sound
Information:
Fits 2004 to 2008 Ford F-150 and Lincoln Mark LT trucks with a 4.6L or 5.4L engine, fits 2 and 4 wheel drive models and all wheelbases.
Application Summary:
| Year |
Make/Model |
| 2004-2008 |
Ford F-150 |
| 2004 |
Ford F-150 Heritage |
| 2006-2008 |
Lincoln Mark LT |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B000QJH2NS |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Mild to Moderate Sound Exterior Exhaust Tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| CARB (California) Compliant |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Drive |
4WD, 2WD |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Diameter |
3.00, 3.00 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Length |
13.00 |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
2, 2 |
| Exhaust Type |
Single |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| Finish |
Aluminized, Aluminized |
| GTIN |
00700042020478 |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Aluminized Steel |
| Mounting Bracket Included |
Yes, Yes |
| Muffler Body Height |
5.00 |
| Muffler Body Length |
17.25, 17.25 |
| Muffler Body Material |
Aluminized Steel, Aluminized Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Body Width |
10.00 |
| Muffler Count |
1 |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Inside Diameter |
3.00, 3.00 |
| Muffler Inlet Outside Diameter |
3.13, 3.13 |
| Muffler Outlet Quantity |
2, 2 |
| Muffler Part Number |
530552, 530552 |
| Muffler Quantity |
1, 1 |
| Muffler Series |
Super 50 Series, Super 50 Series |
| Muffler Type |
Chambered, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Pipe Color |
Silver, Silver |
| Pipe Material |
Aluminized Steel, Aluminized Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Mild, Mild |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tail Pipe Quantity |
2, Dual |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Diameter (in.) |
3 |
| Tip Quantity |
2 |
| Tip Shape |
Round |
| Tip Size |
3 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (in) |
2.5 |
| Type |
Cat-Back, Cat-Back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
36 |
| part type |
Exhaust System, Exhaust System Kit |
