Fits Nissan Titan 2004-2015 with 5.6L engine. - Moderate sound
Introducing the American Thunder cat-back exhaust system for the 2004-2015 Nissan Titan with 5.6L engine. This performance exhaust system bolts up to the factory cat pipes with large dual 2.50-inch mandrel-bent aluminized tubing flowing into a Scavenger Series Y-pipe that creates a stronger signal than conventional y-pipes by using two D-shaped ports back to back, giving a larger surface area than just two round pipes joined together. This creates a much stronger scavenging effect to help evacuate the cylinders during the exhaust stroke netting more power, torque and a deep unique tone. The added torque is especially useful when towing. The system flows out of the Scavenger Y-collector into a 70 Series Big Block II performance muffler giving a deep powerful sound outside the vehicle, with a moderate tone inside the cab. The mandrel-bent tailpipes exit either out the sides behind the rear tires, which is ideal for towing or straight out the back under the rear bumper for a muscular look. The dual tailpipes are finished off with a pair of 3.00-inch polished stainless steel tips embossed with the Flowmaster name. The system utilizes the factory hanger locations and connections and includes all necessary parts, hardware and detailed instructions for an easy at home installation.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel bent 16-gauge Aluminized Steel Tubing
- Dual 3.00-inch Polished Stainless Steel Tips
- 70 Series Big Block II Performance Muffler
- Dyno Tuned for Maximum Performance
- Uses the Factory Hanger Locations
- Moderate Exterior Exhaust Tone
- Scavenger Series Y-pipe
- Easy Installation
Information:
Fits 2004-2015 Nissan Titan with 5.6L engine, fits 2/4 wheel drive and all wheelbases except crew cab/long bed.
Application Summary:
| Year |
Make/Model |
| 2004-2015 |
Nissan TITAN |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B000QJG162 |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
American Thunder |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Length |
13.00 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042020263 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Aluminized Steel |
| Muffler Body Height |
5.00 |
| Muffler Body Length |
22.25 |
| Muffler Body Width |
10.00 |
| Muffler Count |
1 |
| Muffler Inlet Inside Diameter |
3.00 |
| Muffler Inlet Outside Diameter |
3.13 |
| Muffler Part Number |
530702 |
| Muffler Quantity |
1 |
| Muffler Series |
70 Series Big Block |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Diameter (in.) |
3 |
| Tip Quantity |
2 |
| Tip Size |
3 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (in) |
2.5 |
| Warning |
California Proposition 65 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit |
