2005-2010 Dodge Magnum RT, Charger RT and Chrysler 300C with 5.7L engine, including all-wheel drive models. - Moderate to mild sound
The Force II® cat-back exhaust system for the 2005-2010 Dodge Magnum RT, Dodge Charger RT and Chrysler 300C with the 5.7L Hemi engine is perfect for the person looking for all the benefits of a performance exhaust system with a deep moderate exterior exhaust note, but without the interior resonance that most systems have. The system features all mandrel-bent 2.50-inch aluminized steel tubing and our exclusive Scavenger Series® X-pipe flowing into a pair of powerful sounding Super 40 Series™ performance mufflers for a moderate tone. The tailpipes have a pair of specially tuned resonators at the back for minimal drone inside the car and are then finished off with large 4.00-inch polished stainless steel tips exiting in the OE cutouts in the lower valance. Includes all necessary parts, hardware and easy to follow instructions and is covered by our 3-year Limited Warranty. Notes: Also fits all-wheel drive models.
- Includes Hangers and Hardware for an Easy Installation
- Minimal Interior Resonance
- Easy Installation
- Mandrel-bent 16-gauge Stainless Steel Tubing
- Includes a Pair of Specially Tuned Resonators
- Connects After Factory Catalytic Converter
- Super 40 Series Performance Mufflers
- Deep Moderate Exterior Exhaust Note
- Uses the Factory Hanger Locations
- Exclusive Scavenger Series X-pipe
Information:
Fits 2005-2010 Dodge Magnum RT, Dodge Charger RT and Chrysler 300C with 5.7L Hemi engine. Includes all-wheel drive models.
Application Summary:
| Year |
Make/Model |
| 2005-2010 |
Chrysler 300 |
| 2006-2010 |
Dodge Charger |
| 2005-2008 |
Dodge Magnum |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B000CNN106 |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Mild to Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Connects After Factory Catalytic Converter |
| CARB (California) Compliant |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Drive |
4WD, 2WD |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Diameter |
4.00, 4.00 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Length |
7.50 |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
2, 2 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| Finish |
Aluminized, Aluminized |
| GTIN |
00700042020324 |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Aluminized Steel |
| Mounting Bracket Included |
No, No |
| Muffler Body Material |
Aluminized Steel, Aluminized Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Count |
2 |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Inside Diameter |
2.50, 2.50 |
| Muffler Inlet Outside Diameter |
2.63, 2.63 |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Part Number |
952546, 952546 |
| Muffler Quantity |
2, 2 |
| Muffler Series |
Super 40 Series, Super 40 Series |
| Muffler Type |
Chambered, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Pipe Color |
Silver, Silver |
| Pipe Material |
Aluminized Steel, Aluminized Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Mild/Moderate, Moderate/Mild |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tail Pipe Quantity |
2, Dual |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Quantity |
2 |
| Tip Shape |
Round |
| Tip Size |
4.0 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (in) |
2.5 |
| Type |
Cat-Back, Cat-Back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
36 |
| part type |
Exhaust System, Exhaust System Kit |
