1999-2002 Chevrolet Silverado 2500 & GMC Sierra 2500 with 6.0L engine - Non HD models. - Aggressive sound
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. This American Thunder system delivers a moderate interior tone with a deep powerful exterior tone and is suited to the enthusiast who wants their performance to be heard. The system attaches to the back of the catalytic converter with a dual inlet 50 Series Big Block muffler for a deep powerful sound without being obnoxious. Includes a large custom formed aluminum heat shield with stainless clamps and easily attaches directly to the muffler body. The custom bent 3.00-inch aluminized steel tailpipe uses the factory hanger locations for an easy installation and exits out behind the right side rear wheel which is ideal for towing. The tailpipe is finished off with a large 3.50-inch polished 304 stainless steel tip embossed with the Flowmaster logo. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts, hardware and easy to follow instructions for a trouble free installation. Notes: Fits 2/4 wheel drive trucks with the extended cab/short bed configuration - 143.5-inch wheelbase.
- Includes an Aluminum Heat Shield for Rapid Heat Dissipation
- Includes a Large 3.50-inch Polished 304 Stainless Steel Tip
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- Dyno-tuned for Maximum Performance
- Stainless Steel Heat Shield Clamps
- Uses the Factory Hanger Locations
- Aggressive Exterior Exhaust Tone
- Easy Installation
Information:
Fits 1999-2002 Chevrolet Silverado and GMC Sierra 2500 3/4 Ton truck (not-HD) with 6.0L engine, fits 2/4 wheel drive with extended cab/short bed configuration on 143.5-inch wheelbase.
Application Summary:
| Year |
Make/Model |
| 1999-2002 |
Chevrolet Silverado 2500 |
| 1999-2002 |
GMC Sierra 2500 |
| Attributes |
| ASIN |
B000CEBWME |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Aggressive Sound Exterior Exhaust Tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
American Thunder |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Length |
12.00 |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Side Exit |
| Exit Style |
Straight |
| GTIN |
00700042017409 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, Yes |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.750 in., 2.75 |
| Inlet Diameter (in) |
2.75 |
| Inlet Inside Diameter |
6.000 in. |
| Inlet Inside Diameter (in.) |
6, N/A |
| Inlet Position |
Dual |
| Inlet Size (in.) |
6, N/A |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel |
| Muffler (Left) Body Height |
5.00 |
| Muffler (Right) Body Height |
5.00 |
| Muffler Count |
1 |
| Muffler Inlet Inside Diameter |
2.75 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
1 |
| Muffler Series |
50 Series Big Block |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Single |
| Single or Dual |
Single |
| Sound Level |
Aggressive |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00 |
| Tip Diameter |
3.500 in., 3.50 |
| Tip Diameter (in) |
3.5 |
| Tip Diameter (in.) |
3.5 |
| Tip Quantity |
1 |
| Tip Size |
3.5 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (in) |
3 |
| Warning |
California Proposition 65 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit |
