1999-2004 Ford Mustang GT, MACH1 and Bullitt models with 4.6L SOHC engine. - Moderate sound
For the person who is looking for a complete Flowmaster® cat-back dual exhaust system with an aggressive tone. With easy fit in mind, this American Thunder® exhaust system features mandrel-bent 2.50-inch aluminized steel tubing for maximum performance and includes a pair of specially selected Super 40® Series performance mufflers for a deep powerful sound. The custom tailpipes feature added clearance and exit in the factory location with large 3.00-inch polished tips. The system uses the factory hanger locations for an easy install and delivers a moderate to aggressive interior and exterior tone, best suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage and are designed for an easy fit. The system includes all necessary parts, hardware and instructions for an easy installation you can do at home. Covered by our 3-year Limited Warranty. If you prefer a full stainless steel system covered by our Lifetime Limited Warranty, check out our cat-back exhaust system #817312.
- Includes Hangers and Hardware for an Easy Installation
- Large 3.00-inch Polished Stainless Steel Tips
- Dyno Tuned for Maximum Performance
- Super 40 Series Performance Mufflers
- Over 35+years of Flowmaster Quality
- Uses the Factory Hanger Locations
- Moderate Exterior Exhaust Tone
- Easy Installation
Information:
Fits 1999-2004 Ford Mustang GT, MACH1 and Bullitt models (not Cobra) with 4.6L SOHC engine.
Application Summary:
| Year |
Make/Model |
| 1999-2004 |
Ford Mustang |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B000CNLADG |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Clamping Type |
U-Bolt |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
American Thunder |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Length |
12.875 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042017683 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Aluminized Steel |
| Muffler (Left) Body Height |
5.00 |
| Muffler (Left) Body Length |
13.50 |
| Muffler (Left) Body Width |
10.00 |
| Muffler (Right) Body Height |
5.00 |
| Muffler (Right) Body Length |
13.50 |
| Muffler (Right) Body Width |
10.00 |
| Muffler Count |
2 |
| Muffler Inlet Inside Diameter |
2.50 |
| Muffler Inlet Outside Diameter |
2.63 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Super 40 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Sale Category |
Exhaust |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Diameter (in.) |
3 |
| Tip Quantity |
2 |
| Tip Size |
2.5 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (in) |
2.5 |
| Warning |
California Proposition 65 |
| Warranty Time |
36 |
