1966-1967 Ford Fairlane with V8 engine. 2.50 inch Aluminized Steel - Moderate sound
The American Thunder crossmember-back exhaust system for the 1966-1967 Ford Fairlane is constructed from 2.50-inch mandrel-bent 16 gauge aluminized steel tubing to maximize the exhaust flow and comes complete with an H-pipe crossover to equalize the exhaust pressures and eliminates backrap on deceleration. The large case Super 50 Series performance mufflers provide a deep powerful sound and maximum performance flowing into the mandrel-bent tailpipes. The Super 50 mufflers also incorporate built-in resonators keeping the interior resonance down to a minimum. The system is finished off with large 3.00-inch angle polished stainless steel tips and includes all necessary parts, hardware and instructions to complete the installation. All aluminized steel exhaust systems are covered by our 3-year Limited Warranty.
- H-pipe Crossover for Maximum Power and Deep Tone
- Super 50 Series Mufflers for Deep Powerful Sound
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- Includes Hangers and Hardware for Installation
- Moderate to Aggressive Exterior Exhaust Tone
- Crossmember-back True Dual Exhaust System
- Does Not Include Header Reducers or Downpipes for Factory Manifolds
- Minimal Interior Resonance
Information:
Fits 1966-1967 Ford Fairlane with V8 engine, does not fit convertibles.
Application Summary:
| Year |
Make/Model |
| 1966-1967 |
Ford Fairlane |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B000CEG2CO |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Header-back System |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
3, 5 |
| Exhaust Series |
American Thunder |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042016587 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Aluminized Steel |
| Muffler Count |
2 |
| Muffler Part Number |
52556 |
| Muffler Quantity |
2 |
| Muffler Series |
Super 50 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Complete Exhaust Kits |
| System Type |
Header Back, Crossmember-back |
| Tail Pipe Diameter |
2.500 in. |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Diameter (in.) |
3 |
| Tip Quantity |
2 |
| Tip Size |
3 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (in) |
2.5 |
| Type |
Crossmember-back |
| Warning |
California Proposition 65 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit |
