Fits 1964-1966 Ford Mustang with a V8 engine, 2.5" Aluminized Pipes - Aggressive to moderate sound
This American Thunder® crossmember-back exhaust system is custom designed for the 1964-1966 Ford Mustang and is perfect for the person looking for a complete 2.50-inch dual exhaust system with a moderately aggressive exterior tone, and a moderate interior sound. With easy fit in mind, these 16-gauge aluminized steel systems feature all mandrel-bent tubing, an H-pipe to equalize the exhaust pressures and a pair of specially selected 40 Series Delta Flow performance mufflers for a deep powerful sound. The mandrel-bent 2.50-inch tailpipes tuck up out of the way for maximum clearance and the last few feet is all polished stainless steel for a show car look. Like all Flowmaster® systems, benefits include improved throttle response, power, and mileage. Designed for an easy fit, these systems include all necessary parts, hardware and instructions for an easy installation. The system is covered by our 3-year Limited Warranty. Connects to existing header collector reducer cones or manifold downpipes(not included.) If you prefer a full stainless steel system with a Lifetime Limited Warranty, check out exhaust system #817273. Notes: For non GT and hardtop models.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- Extra Long Polished Stainless Steel Tips
- 40 Series Delta Flow Performance Mufflers
- Over 35+years of Flowmaster Quality
- Deep Powerful Exhaust Tone
- H-pipe Crossover Tube
- Crossmember-back System
Information:
Does Not fit GT models or convertibles.
Application Summary:
| Year |
Make/Model |
| 1964-1966 |
Ford Mustang |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B000CE9NU2 |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Header-back System |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Clamping Type |
U-Bolt |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
American Thunder |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042016594 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Aluminized Steel |
| Muffler Body Height |
4.00 |
| Muffler Body Width |
9.75 |
| Muffler Count |
2 |
| Muffler Part Number |
942541 |
| Muffler Quantity |
2 |
| Muffler Series |
40 Series Delta Flow |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate, Aggressive / Moderate |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Complete Exhaust Kits |
| System Type |
Header Back, Crossmember-back |
| Tail Pipe Diameter |
2.500 in. |
| Tip Diameter |
2.500 in., 2.50 |
| Tip Diameter (in) |
2.5 |
| Tip Diameter (in.) |
2.5 |
| Tip Quantity |
2 |
| Tip Size |
2.5 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (in) |
2.5 |
| Type |
Crossmember-back |
| Warning |
California Proposition 65 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit |
