1998 Ford Mustang GT and Cobra with 4.6L engine. - Aggressive to moderate sound
Our American Thunder® exhaust system for 1998 Ford Mustang Gt and Cobra models with the 4.6L engine is a bolt-on emissions legal system features free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes, aluminized steel tailpipes and uses the factory hanger locations for quick and easy installation. The kit comes with a pair of Super 44™ mufflers with that iconic deep and powerful sound. The system is then finished off with a pair of long 2.50-inch 304 stainless steel tips for that show car look. Comes with all necessary hardware and easy to follow instructions.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- Dyno Tuned for Maximum Performance
- Super 44 Series Performance Mufflers
- Uses the Factory Hanger Locations
- Long Polished Stainless Steel Tips
- Covered by our 3-Year Warranty
- Moderate Exterior Exhaust Tone
- Quick and Easy Installation
Information:
Fits 1998 Ford Mustang GT and Cobra with 4.6L engine.
Application Summary:
| Year |
Make/Model |
| 1998 |
Ford Mustang |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B000BURBQ0 |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Clamping Type |
U-Bolt |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
American Thunder |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Length |
24.50 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042014972 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Aluminized Steel |
| Muffler (Left) Body Height |
4.00 |
| Muffler (Left) Body Length |
13.25 |
| Muffler (Left) Body Width |
9.50 |
| Muffler (Right) Body Height |
4.00 |
| Muffler (Right) Body Length |
13.25 |
| Muffler (Right) Body Width |
9.50 |
| Muffler Count |
2 |
| Muffler Inlet Inside Diameter |
2.50 |
| Muffler Inlet Outside Diameter |
2.63 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Super 44 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate, Aggressive / Moderate |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tip Diameter |
2.500 in., 2.50 |
| Tip Diameter (in) |
2.5 |
| Tip Diameter (in.) |
2.5 |
| Tip Quantity |
2 |
| Tip Size |
2.5 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (in) |
2.5 |
| Warning |
California Proposition 65 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit |
