1988-1992 Chevrolet/GMC 1/2 Ton or 3/4 Ton, Standard Cab/Long Bed with 5.7L Engine and Slip-Fit Catalytic Converter. - Mild sound
"For the person who wants a subtle custom appearance with all the benefits that a Flowmaster® Cat-back exhaust system provides. S.O.S. (Single out side) systems are the perfect choice. Our Force II® systems delivers a moderate exterior tone and mild to moderate interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. This system is constructed from large 3.00-inch mandrel-bent aluminized steel tubing flowing into a 70 Series™ Big Block II™ muffler for a deep mellow tone. The 3.00-inch tailpipe uses the factory hangers for a quick and easy installation and is finished off with a turn down style tip cut into the tubing. This exit location is especially recommended for towing applications since it will not be blowing exhaust on your boat or trailer. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Fits Standard Cab/Long Bed trucks only.
- Includes Hangers and Hardware for an Easy Installation
- Dyno Tuned for Maximum Performance
- Uses the Factory Hanger Locations
- Moderate Exterior Exhaust Tone
- Mandrel-bent 16 Gauge Tubing
- Aluminized Steel Construction
- 3-year Limited Warranty
Information:
Fits Standard Cab/Long Bed trucks only.
Application Summary:
| Year |
Make/Model |
| 1988-1992 |
Chevrolet C1500 |
| 1989-1992 |
Chevrolet C2500 |
| 1988-1992 |
Chevrolet K1500 |
| 1988-1992 |
Chevrolet K2500 |
| 1988-1992 |
GMC C1500 |
| 1988-1992 |
GMC C2500 |
| 1988-1992 |
GMC K1500 |
| 1988-1992 |
GMC K2500 |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B000CNLA1S |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Mild to Moderate Sound Exterior Exhaust Tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Clamping Type |
U-Bolt |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Quantity |
Sold Separately |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Side Exit |
| Exit Style |
Straight |
| GTIN |
00700042010165 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel |
| Muffler Count |
1 |
| Muffler Part Number |
53073 |
| Muffler Quantity |
1 |
| Muffler Series |
70 Series Big Block |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Single |
| Single or Dual |
Single |
| Sound Level |
Mild |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tip Diameter |
N/A |
| Tip Quantity |
Not Included |
| Tip Size |
N/A |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (in) |
3 |
| Warning |
California Proposition 65 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit |
