Flowmaster 17125 88-92 CHEV/GMC TRK 117 WB F-II

1988-1992 Chevrolet/GMC truck 1/2 Ton or 3/4 Ton, Standard Cab/Short Bed with 5.7L Engine using a Slip-Fit Catalytic Converter. - Mild sound

For the person who wants a subtle custom appearance with all the benefits that a Flowmaster® Cat-back exhaust system provides. S.O.S. (Single out side) systems are the perfect choice. Our Force II® systems delivers a moderate exterior tone and mild to moderate interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. This system is constructed from large 3.00-inch mandrel-bent aluminized steel tubing flowing into a 70 Series™ Big Block II™ muffler for a deep mellow tone. The 3.00-inch tailpipe uses the factory hangers for a quick and easy installation and is finished off with a turn down style tip cut into the tubing. This exit location is especially recommended for towing applications since it will not be blowing exhaust on your boat or trailer. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Note: Fits 2/4 wheel drive Standard Cab/Short bed configuration with 117-inch wheelbase.

Includes Hangers and Hardware for an Easy Installation
Dyno Tuned for Maximum Performance
Uses the Factory Hanger Locations
Moderate Exterior Exhaust Tone
Mandrel-bent 16 Gauge Tubing
Aluminized Steel Construction
3-year Limited Warranty

Information:

Fits 1988-1992 Chevrolet/GMC trucks on a 1/2 Ton or 3/4 Ton chassis with 5.7L engine using a slip fit catalytic converter. Fits 2/4 wheel drive Standard Cab/Short bed configuration with 117-inch wheelbase.

Application Summary:

Year	Make/Model
1988-1992	Chevrolet C1500
1989-1992	Chevrolet C2500
1988-1992	Chevrolet K1500
1988-1992	Chevrolet K2500
1988-1992	GMC C1500
1989-1992	GMC C2500
1988-1992	GMC K1500
1989-1992	GMC K2500

Attributes
2WD/4WD	2WD, 4WD
ASIN	B000CNN0GQ
Brand	Flowmaster
Bullet Point #1	Mandrel bent 16 Gauge Tubing
Bullet Point #2	Mild exterior exhaust tone
Bullet Point #3	Includes hangers and hardware for easy installation
Bullet Point #4	Dyno tuned for maximum performance
California Proposition 65	WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Catalytic Converter Quantity	Not Included
Category	Exhaust
Clamping Type	U-Bolt
Country of Origin (Primary)	US
Emission Code	5
Exhaust Series	Force II
Exhaust System Kit Type	Cat-Back
Exhaust Tip Quantity	Sold Separately
Exhaust Type	Single
Exit Position	Single Side, Single Side Exit
Exit Style	Straight
GTIN	00700042010158
Harmonized Tariff Code (Schedule B)	8708925000
Hazardous Material Code	N
Heat Shield	No
Heat Shield Attached	No
Inlet Diameter	3.000 in., 3.00
Inlet Diameter (in)	3
Inlet Inside Diameter	N/A
Inlet Inside Diameter (in.)	N/A
Inlet Size (in.)	N/A
Life Cycle Status Code	Available to Order
Material	Aluminized Steel
Muffler Count	1
Muffler Part Number	53073
Muffler Quantity	1
Muffler Series	70 Series Big Block
Muffler Type	Chambered
NAFTA Preference Criterion Code	B
Outlet Diameter	3.000 in., 3.00
Outlet Diameter (in)	3
Outlet Outside Diameter	3.000 in.
Outlet Outside Diameter (in.)	3
Outlet Size (in.)	3
Product Type	Exhaust Systems / Kits, Exhaust System
SDR Required Flag	N
SDS Sheet Number	N
Series	Force II Exhaust Systems
Single Dual	Single
Single or Dual	Single
Sound Level	Mild
Sub Category	Exhaust and Tail Pipes
Subcategory	Cat-Back Exhaust Kits
System Type	Cat Back, Cat-back
Tail Pipe Diameter	3.000 in.
Tip Diameter	N/A
Tip Quantity	Not Included
Tip Size	N/A
Tubing Diameter	3.000 in., 3.00
Tubing Diameter (in)	3
Warning	California Proposition 65
Warranty Time	36
part type	Exhaust System Kit