Fits 1967-1969 Chevrolet Camaro/Pontiac Firebird. 3.00 inch Aluminized Pipe
These Builder Series tailpipes are constructed from 3.00-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exits at rear quarter panel turned down at an angle. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 943046 (Super 44 Series) or 943051 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
- Exits Straight-out under the Rear Bumper
- Mandrel-bent for Maximum Performance
- High Clearance around Rear Differential
- Designed for Double Off-set Mufflers
- 16 Gauge Aluminzed Steel Tubing
- Does Not Include Hardware
- 3-year Limited Warranty
Information:
Fits 1967-1969 Chevrolet Camaro/Pontiac Firebird. Use with Side Inlet/Center Outlet mufflers.
Application Summary:
| Year |
Make/Model |
| 1967-1969 |
Chevrolet Camaro |
| 1967-1969 |
Pontiac Firebird |
| Attributes |
| ASIN |
B000CNHD14 |
| Automotive Item Grade |
High Performance |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Exits at rear of vehicle |
| Bullet Point #3 |
Flowmaster Quality |
| Bullet Point #4 |
Premium Quality |
| California Proposition 65 |
No |
| Category |
Exhaust |
| Color |
Gray |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exit Position |
Dual Rear, Dual Rear Exit |
| Fitment |
Direct OE Replacement, Direct Fit |
| GTIN |
00700042020379 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Overall Length |
49.000 in., 49.00 |
| Overall Length (in) |
49 |
| Overall Length (in.) |
49.000 in. |
| Position |
N/A |
| Product Type |
Exhaust Accessories |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Builder Accessories |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Miscellaneous Exhaust |
| System Type |
Tailpipe, Tailpipe Kit |
| Tube Diameter |
3 inch, 3.00 |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (in) |
3 |
| Type of Exhaust |
Tail Pipe Kit |
| Universal Or Specific Fit |
Specific Fit |
| Warranty Time |
36 |
| part type |
Exhaust Tail Pipe |
