Fits 1968-1972 GM A-Body. 3.0 inch Aluminized Steel
These Builder Series tailpipes are constructed from 3.00-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 943048 (Super 44 Series) or 53058 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
- Exits Straight-out under the Rear Bumper
- Mandrel-bent for Maximum Performance
- High Clearance around Rear Differential
- Designed for Double Off-set Mufflers
- 16 Gauge Aluminzed Steel Tubing
- Does Not Include Hardware
- 3-year Limited Warranty
Information:
Fits 1968-1972 GM A-Body. Use Side Inlet/Opposite Side Outlet mufflers.
Application Summary:
| Year |
Make/Model |
| 1968-1969 |
Buick GS 400 |
| 1970-1972 |
Buick GS 455 |
| 1968 |
Buick Skylark |
| 1970-1972 |
Buick Skylark |
| 1968-1972 |
Chevrolet Chevelle |
| 1970-1972 |
Chevrolet Monte Carlo |
| 1968-1971 |
Oldsmobile 442 |
| 1968 |
Oldsmobile Cutlass |
| 1970-1972 |
Oldsmobile Cutlass |
| 1968-1972 |
Pontiac Grand Prix |
| 1968-1972 |
Pontiac GTO |
| 1968-1972 |
Pontiac LeMans |
| Attributes |
| ASIN |
B001JQZ76Q |
| Automotive Item Grade |
High Performance, High Performance |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Exits at rear of vehicle |
| Bullet Point #3 |
Aluminized steel |
| Bullet Point #4 |
Premium Quality |
| California Proposition 65 |
No |
| Category |
Exhaust, Exhaust |
| Color |
Gray |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exit Position |
Dual Rear, Dual Rear Exit |
| Fitment |
Direct OE Replacement, Direct Fit |
| GTIN |
00700042020355 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Position |
N/A |
| Product Type |
Exhaust Accessories, Exhaust Accessories |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Builder Accessories |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Miscellaneous Exhaust |
| System Type |
Tailpipe, Tailpipe Kit |
| Tube Diameter |
3 inch, 3.00 |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (in) |
3 |
| Type of Exhaust |
Tail Pipe Kit, Tail Pipe Kit |
| Universal Or Specific Fit |
Specific Fit |
| Warranty Time |
36 |
| part type |
Exhaust Tail Pipe |
