Fits 1988-1998 Chevrolet/GMC C/K 1500 trucks.
These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit out the sides behind the rear wheels. Designed to be used with a Single Inlet/Dual 2.50-inch Outlet mufflers such as part# 9430452 (Super 44 Series) or 530552 (Super 50 Series) muffler. Covered by our 3-year Limited Warranty. Note: Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
- Mandrel-bent for Maximum Performance
- High Clearance around Rear Differential
- Exits Out the Sides Behind Rear Wheels
- Designed for Double Off-set Mufflers
- 16 Gauge Aluminzed Steel Tubing
- Does Not Include Hardware
- 3-year Limited Warranty
Information:
Fits 1988-1998 Chevrolet/GMC C1500 and K1500 Pickups. Designed to work with a center in / dual out muffler.
Application Summary:
| Year |
Make/Model |
| 1988-1999 |
Chevrolet C1500 |
| 1988-1999 |
Chevrolet K1500 |
| 1988-1999 |
GMC C1500 |
| 1988-1999 |
GMC K1500 |
| Attributes |
| 2WD/4WD |
RWD/4WD, 2WD |
| ASIN |
B00VA7Y61G |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Aluminized Steel Construction |
| Bullet Point #2 |
Dual Side Exit |
| Bullet Point #3 |
Smooth Mandrel Bent Design |
| Bullet Point #4 |
Made in the USA |
| California Proposition 65 |
No |
| Category |
Exhaust, Exhaust |
| Clamps Included |
Yes |
| Color |
Gray |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Pipe Bend Type |
Assorted, Assorted |
| Exit Position |
Dual Side, Dual Side Exit |
| Finish |
Aluminized |
| Flanged Inlet |
No |
| GTIN |
00700042032228 |
| Grade Type |
Performance |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Inside Diameter |
2.50 |
| Inlet Outside Diameter |
2.63 |
| Inlet Type |
Weld-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Aluminized Steel |
| Mount Type |
Yes, Yes |
| Muffler Part Number |
Kit Only, Kit Only |
| NAFTA Preference Criterion Code |
B |
| Outlet Inside Diameter |
2.50 |
| Outlet Outside Diameter |
2.63 |
| Position |
N/A |
| Product Type |
Exhaust Accessories, Exhaust Accessories |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Builder Accessories |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Tips |
| System Type |
Tailpipe, Tailpipe Kit |
| Tapered Outlet |
No |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (in) |
2.5 |
| Universal Or Specific Fit |
Specific Fit |
| Warranty Time |
36 |
| Welded Hanger |
No |
| part type |
Exhaust Tail Pipe |
