Fits 1967-1969 Camaro and Firebird with V8 engine. 3.00-inch Aluminized pipes.
This mandrel-bent headers-back exhaust system is custom designed for most 1967-1969 Chevrolet Camaro and Pontiac Firebird, and is perfect for the person looking for true dual exhaust system. This system comes complete minus the mufflers and allows you to choose the sound level of the Flowmaster performance mufflers you desire for your vehicle. System features include all mandrel-bent 3.00-inch aluminized steel tubing, an H-pipe to equalize the exhaust gas pressures and sound for maximum performance and maximum clearance. Designed for an easy fit, these systems covered by our 3-year Limited Warranty. Notes: Requires 3.00-inch Offset Inlet/Opposite side Offset Outlet such as part# 943048 (Super 44 Series) mufflers.
- Designed for Side Inlet/Center Outlet Mufflers
- Mandrel-bent for Maximum Performance
- High Clearance around Rear Differential
- 16 Gauge Aluminzed Steel Tubing
- Does Not Include Hardware
- Mufflers Sold Separately
- 3-year Limited Warranty
Information:
Use Offset Inlet/Center Outlet Mufflers Only.
Fabrication required for installation of H-pipe.
Does Not Include Header Collector Adapter Cones or hardware.
Application Summary:
| Year |
Make/Model |
| 1967-1969 |
Chevrolet Camaro |
| 1967-1969 |
Pontiac Firebird |
| Attributes |
| Brand |
Flowmaster |
| California Proposition 65 |
No |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
U-Bolt, U-Bolt |
| Clamps Included |
No, No |
| Color |
Gray |
| Country of Origin (Primary) |
US |
| Emission Code |
3, 3, Off Road |
| Exhaust Tip Diameter |
3.00, 3.00 |
| Exhaust Tip Quantity |
Sold Separately |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Rear Exit |
| Exit Style |
Turn Down |
| Finish |
Aluminized, Aluminized |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
No, No |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Type |
Weld-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel |
| Mounting Bracket Included |
No, No |
| Muffler Body Length |
No Muffler |
| Muffler Included |
No |
| Muffler Quantity |
Sold Separately |
| Muffler Type |
Not Included, Not Included |
| NAFTA Preference Criterion Code |
B |
| Outlet Outside Diameter |
3.000 in. |
| part type |
Exhaust System Kit, Exhaust System |
| Pipe Color |
Silver, Silver |
| Pipe Material |
Aluminized Steel, Aluminized Steel |
| Product Type |
Exhaust Accessories, Exhaust Accessories |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Complete Exhaust Kits |
| System Type |
Pipe, Pipe Kit |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00, 3.00 |
| Tail Pipe Quantity |
2, Dual |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Diameter |
3.000 in. |
| Tip Logo |
None |
| Tip Shape |
Round |
| Tube Diameter |
3 inch, 3.00 |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (in) |
3 |
| Type |
Crossmember-back, Header-Back |
| Type of Exhaust |
Header-Back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warranty Time |
36 |
| GTIN |
00090127078051 |
