Design Engineering, Inc. 91482 Protect-A-Sleeve - 2 ID - Bulk - Titanium - sold by the foot
One length of Titanium Protect-A-Sleeve with a 2 inch inside diameter, sold by linear foot.
Titanium(TM) Protect-A-Sleeve solves the problem of burning, cracking plug wires, lines & hoses from engine & exhaust heat. DEI's Titanium Protect-A-Sleeve with LR Technology(TM) offers the best possible line sleeve protection on the market. Developed specifically for any application where extreme high heat is present, these Titanium sleeves will protect wires, lines and cables when exposed up to 1800F direct heat/2500F radiant. Developed with DEI's proprietary LR Technology, these high temperature rated sleeves provide superior thermal protection for street vehicles or race engines, protecting fuel, oil lines, spark plug and electrical wires from direct or under hood radiant heat. Water and heat resistant, they are also ideal for Powersports ATV/UTV, motorcycle, personal watercraft, snowmobiles, and marine use. DOES NOT INCLUDE Black Spark Plug Wire / Boot Shrink Tubes Protects plug wires from hot exhaust manifolds & headers Sizes large enough for radiator hoses, heater hoses & other large hoses Minimum bulk length available is 4 feet
  • Same Material As Our Titanium Exhaust Wrap
  • Can Withstand Temperatures To 1800Degrees
  • Chemical And Abrasion Resistant
  • Includes Heat Shrink Ends

Information:

Titanium(TM) Protect-A-Sleeve solves the problem of burning, cracking plug wires, lines & hoses from engine & exhaust heat. DEI's Titanium Protect-A-Sleeve with LR Technology(TM) offers the best possible line sleeve protection on the market. Developed specifically for any application where extreme high heat is present, these Titanium sleeves will protect wires, lines and cables when exposed up to 1800F direct heat/2500F radiant. Developed with DEI's proprietary LR Technology, these high temperature rated sleeves provide superior thermal protection for street vehicles or race engines, protecting fuel, oil lines, spark plug and electrical wires from direct or under hood radiant heat. Water and heat resistant, they are also ideal for Powersports ATV/UTV, motorcycle, personal watercraft, snowmobiles, and marine use. DOES NOT INCLUDE Black Spark Plug Wire / Boot Shrink Tubes Protects plug wires from hot exhaust manifolds & headers Sizes large enough for radiator hoses, heater hoses & other large hoses Minimum bulk length available is 4 feet
Attributes
A/N Size N/A, N/A
California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Color Tan
Country of Origin (Primary) US
Direct Heat Resistance 1800°F
GTIN 00607078914828
Harmonized Tariff Code (Schedule B) 6806100000
Hazardous Material Code N
ID Imperial 2 inch
ID Metric 50 mm
Includes One length of Titanium Protect-A-Sleeve with a 2 inch inside diameter, sold by linear foot.
Inside Diameter 2.000 in.
Length by the foot
Life Cycle Status Code Available to Order
Material Titanium
Max Temperature Rating 1800 Degree
NAFTA Preference Criterion Code B
Product Length N/A
Radiant Heat Resistance 2500°F
SDR Required Flag N
Size 2.000 in.
Warranty Time 1

Write a review.

Note: HTML is not translated.
    Bad           Good

Design Engineering, Inc. 91482 Protect-A-Sleeve - 2 ID - Bulk - Titanium - sold by the foot

Product Information

  • $21.90

Vehicle Fitment

SunMonTueWedThuFriSat
303112345678910111213141516171819202122232425262728293012345678910
:
PM