One 12 inch by 21 inch sheet of Form-A-Shield.
Form-A-Shield(TM) solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400F+, Form-A-Shield can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system. Extremely pliable and forms to many shapes and configurations Durable and resistant to oil and chemical spills Withstands direct heat up to 1400F+ Superior insulator anywhere near the path of exhaust pipes Can be applied directly to hot surfaces Fasten with straps, clamps or DEI Locking Ties No adhesive backing NOTE: Use DEI Adhesive Spray with Form-A-Shield on non-hot areas to serve as a heat barrier / reflector
Form-A-Shield(TM) solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400F+, Form-A-Shield can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system. Extremely pliable and forms to many shapes and configurations Durable and resistant to oil and chemical spills Withstands direct heat up to 1400F+ Superior insulator anywhere near the path of exhaust pipes Can be applied directly to hot surfaces Fasten with straps, clamps or DEI Locking Ties No adhesive backing NOTE: Use DEI Adhesive Spray with Form-A-Shield on non-hot areas to serve as a heat barrier / reflector
- Can Be Applied Directly To Hot Surfaces
- Ideal For Firewalls/Exhaust Manifolds/Transmission Tunnels
- Superior Insulator Anywhere Near The Path Of Exhaust Pipes
- Withstands Direct Heat Up To 1400 Degrees F
- Constructed From 10 Mil Aluminum Bonded To 1/4 in. Basalt Mat
- Extremely Pliable And Forms To Many Shapes And Configurations
- No Adhesive Backing
- Fasten With Straps- Clamps Or DEI Locking Ties
- Durable And Resistant To Oil And Chemical Spills
Information:
Form-A-Shield(TM) solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400F+, Form-A-Shield can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system. Extremely pliable and forms to many shapes and configurations Durable and resistant to oil and chemical spills Withstands direct heat up to 1400F+ Superior insulator anywhere near the path of exhaust pipes Can be applied directly to hot surfaces Fasten with straps, clamps or DEI Locking Ties No adhesive backing NOTE: Use DEI Adhesive Spray with Form-A-Shield on non-hot areas to serve as a heat barrier / reflector| Attributes | |
| Backing | Non-Adhesive |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color | Silver |
| Country of Origin (Primary) | US |
| Direct Heat Resistance | 1400°F |
| GTIN | 00607078505194 |
| Harmonized Tariff Code (Schedule B) | 7616990000 |
| Hazardous Material Code | N |
| Includes | One 12 inch by 21 inch sheet of Form-A-Shield. |
| Life Cycle Status Code | Available to Order |
| NAFTA Preference Criterion Code | B |
| Overall Length | N/A, N/A |
| SDR Required Flag | N |
| Warranty Time | 1 |
| Width | N/A |
Design Engineering, Inc. 50519 Form-A-Shield
Product Information
- Brand: Design Engineering, Inc.
- Product Number: 50519
$33.97
