One 24 inch by 24 inch sheet of Reflect-A-Cool.
Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won't lift off DO NOT apply directly to exhaust components.
Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won't lift off DO NOT apply directly to exhaust components.
- Radiant Heat Protection Up To 2000 Degrees F
- Self-Adhesive Backing With Release Liner For Easy Installation
- Moisture And Solvent Resistant
- Virtually NO Clearance Needed
- Light Weight And Flexible-Trim To Size
- 0.0065 in. Thick
- Easy To Apply- Wont Lift Off
- 24 in. x 24 in. sheet
Information:
Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won't lift off DO NOT apply directly to exhaust components.| Attributes | |
| Backing | Adhesive |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color | Silver |
| Country of Origin (Primary) | CN |
| Direct Heat Resistance | 400°F |
| GTIN | 00607078104625 |
| Harmonized Tariff Code (Schedule B) | 7019640000 |
| Hazardous Material Code | N |
| Includes | One 24 inch by 24 inch sheet of Reflect-A-Cool. |
| Life Cycle Status Code | Available to Order |
| NAFTA Preference Criterion Code | B |
| Radiant Heat Resistance | 2000°F |
| SDR Required Flag | N |
| Warranty Time | 1 |
Design Engineering, Inc. 10462 Reflect-A-Cool 24 x 24 sheet
Product Information
- Brand: Design Engineering, Inc.
- Product Number: 10462
$31.21
