One 24 inch by 150 foot roll of Reflect-A-Gold.
Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325F 0.0065 in. thick Easy to apply, won't lift off DO NOT apply directly to exhaust components.
Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325F 0.0065 in. thick Easy to apply, won't lift off DO NOT apply directly to exhaust components.
- For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
- Handles Continuous Temps Up To 800 Degrees F
- Resists UV Degradation For Long-Term Performance
- Adhesive Protected By Release Liner Rated Up To 325 Degrees F
- Virtually NO Clearance Needed
- Light Weight And Flexible-Trim To Size
- 0.0065 in. Thick
- Easy To Apply- Wont Lift Off
Information:
Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325F 0.0065 in. thick Easy to apply, won't lift off DO NOT apply directly to exhaust components.| Attributes | |
| Adhesive Heat Resistance | 325°F |
| Backing | Adhesive |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color | Gold |
| Country of Origin (Primary) | US |
| GTIN | 00607078103901 |
| Harmonized Tariff Code (Schedule B) | 7019640000 |
| Hazardous Material Code | N |
| Includes | One 24 inch by 150 foot roll of Reflect-A-Gold. |
| Life Cycle Status Code | Available to Order |
| NAFTA Preference Criterion Code | B |
| Radiant Heat Resistance | 850°F |
| SDR Required Flag | N |
| Warranty Time | 1 |
Design Engineering, Inc. 10390 Reflect-A-GOLD™ 24 wide x 150ft roll
Product Information
- Brand: Design Engineering, Inc.
- Product Number: 10390
$5,676.33
