A 14 inch x 6 inch Titanium and silica shield, with included mounting stand-offs, hardware, and locking ties.

---

Chevrolet located the engine oil cooler and oil filter on the C7 Corvette close to the driver side catalytic converter causing heat transfer into the engine oil. Possibly making the ECM send the car into limp mode. By installing our converter heat shield we block this heat transfer and prevent the oil temperature from rising. Dual layer design - Outer layer is hi-temp Titanium Inner layer is 89 percent silica to handle extreme heat Reduce heat soak into oil Easy installation with stainless steel Locking Ties Helps prevent Corvette from going into limp mode from engine oil becoming too hot Size is 14 in. x 6 in.

• Easy Install/Simple Clamp On With Provided Stainless Clamps
• Prevents Over Heating Of Engine Oil
• Prevent The Heat That Triggers ECM Power Reduction

---

Information:

Chevrolet located the engine oil cooler and oil filter on the C7 Corvette close to the driver side catalytic converter causing heat transfer into the engine oil. Possibly making the ECM send the car into limp mode. By installing our converter heat shield we block this heat transfer and prevent the oil temperature from rising. Dual layer design - Outer layer is hi-temp Titanium Inner layer is 89 percent silica to handle extreme heat Reduce heat soak into oil Easy installation with stainless steel Locking Ties Helps prevent Corvette from going into limp mode from engine oil becoming too hot Size is 14 in. x 6 in.