{"title":"Air Bags \u0026 Helper Springs","description":"\u003cp\u003eIf your truck squats under a camper, a gooseneck or a bed full of tools, air bags are the simplest fix. Air helper springs sit between the frame and the axle and let you add air pressure to level the truck, firm up the ride and keep your headlights pointed down the road instead of into the sky.\u003c\/p\u003e\u003cp\u003eThis collection includes Air Lift LoadLifter 5000 and other Air Lift kits, Firestone Ride-Rite and RED Label air spring kits, and on-board compressors and controls such as Air Lift WirelessOne and the Firestone All-In-One kits that let you adjust pressure from the cab or your phone.\u003c\/p\u003e\u003cp\u003eAir springs work with your factory leaf springs, so most kits bolt on without drilling and you can run low pressure when the truck is empty. Check the fitment notes for your year, 2WD or 4WD and bed length, and note each kit's maximum load rating.\u003c\/p\u003e\u003cp\u003eWe're based in Ropesville, just southwest of Lubbock, so West Texas truck owners can call (806) 503-2161 or stop by the shop. Towing season or harvest season, we can help you choose the right kit and controls for the load you pull.\u003c\/p\u003e","products":[{"product_id":"air-lift-loadcontroller-on-board-air-compressor-kit","title":"Air Lift LoadController On-Board Air Compressor Kit","description":"\u003cp\u003eLoadController puts air spring control in the cab. You adjust pressure with one touch on the compact gauge, parked or rolling, so you don't have to hunt for an air hose when the load changes. It works with any brand of air springs.\u003c\/p\u003e\u003cp\u003eAir Lift's low-pressure sensor automatically adds air if pressure drops below 5 PSI. Single-path kits inflate both springs to the same pressure. The dual-path kit controls two springs independently, or four springs two at a time. The gauge pod can go in the included cup, flush in the dash, or in any 2-1\/8 in. gauge hole.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne-touch control built into the gauge\u003c\/li\u003e\n\u003cli\u003eAutomatic low-pressure protection below 5 PSI\u003c\/li\u003e\n\u003cli\u003ePre-assembled wiring harness for a quicker install\u003c\/li\u003e\n\u003cli\u003eTwo-year limited warranty plus a 60-day money-back guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Pick your kit from the Kit menu. Each option is its own Air Lift part number, so match it to your setup (single or dual path) before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the box:\u003c\/strong\u003e Compressor, gauge with mounting pod\/cup, pre-assembled wiring harness, installation hardware and an illustrated manual. The heavy-duty kits include Air Lift's heavy-duty compressor.\u003c\/p\u003e\u003cp\u003eQuestions on fitment? Call the shop at (806) 503-2161.\u003c\/p\u003e","brand":"Air Lift","offers":[{"title":"Dual Path Heavy Duty Compressor","offer_id":68012587450600,"sku":"25856","price":619.99,"currency_code":"USD","in_stock":true},{"title":"LoadController II Single Path (Standard Duty)","offer_id":68012587483368,"sku":"25592","price":336.99,"currency_code":"USD","in_stock":true},{"title":"Single Path Heavy Duty Compressor","offer_id":68012587516136,"sku":"25854","price":407.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/ed270f988be0ed065962a42eae71f4d9.jpg?v=1793820509"},{"product_id":"air-lift-wirelessone-on-board-air-compressor-system","title":"Air Lift WirelessOne On-Board Air Compressor System","description":"\u003cp\u003eWirelessOne is Air Lift's single-path on-board air system. Both air springs fill and drain together at the same pressure, so there's no more hunting for a gas station air hose and fighting Schrader valves. It works with any brand of aftermarket air springs and operates from 5 to 100 PSI.\u003c\/p\u003e\u003cp\u003eYou run it from the wireless handheld with an LCD and three memory settings, or from the free iOS\/Android app over Bluetooth. Software updates come over the air through the app. No air lines run to the cab, which keeps install simple. EZ Mount kits come with an upgraded compressor on a bracket, and the Tank kit combines manifold and compressor into a tank system.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle-path control, both springs adjusted equally\u003c\/li\u003e\n\u003cli\u003eWireless handheld with three memory presets plus mobile app\u003c\/li\u003e\n\u003cli\u003eWeather-resistant, corrosion-proof manifold\u003c\/li\u003e\n\u003cli\u003eTwo-year limited warranty plus a 60-day money-back guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Pick your kit from the Kit menu. Each option is its own Air Lift part number, so match it to your setup (standard, EZ Mount or Tank) before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the box:\u003c\/strong\u003e Manifold, compressor, wireless handheld controller, wiring harness, installation hardware and an illustrated manual. The EZ Mount and Tank versions add the bracket and tank system.\u003c\/p\u003e\u003cp\u003eQuestions on fitment? Call the shop at (806) 503-2161.\u003c\/p\u003e","brand":"Air Lift","offers":[{"title":"WirelessOne 2nd Gen (Standard Mount)","offer_id":68012587581672,"sku":"AL-25980","price":551.99,"currency_code":"USD","in_stock":true},{"title":"WirelessOne 2nd Gen w\/ EZ Mount","offer_id":68012587614440,"sku":"25980EZ","price":713.99,"currency_code":"USD","in_stock":true},{"title":"WirelessOne Tank Kit w\/ EZ Mount","offer_id":68012587647208,"sku":"25981EZ","price":1335.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/15401513058536.jpg?v=1793820909"},{"product_id":"air-lift-wirelessair-on-board-air-compressor-system","title":"Air Lift WirelessAir On-Board Air Compressor System","description":"\u003cp\u003eWirelessAir is Air Lift's dual-path on-board air system. It inflates and deflates each air spring separately, so you can run different pressures side to side for uneven or top-heavy loads. It works with all brands of air springs, not just Air Lift.\u003c\/p\u003e\u003cp\u003eYou control it with the wireless handheld (LCD, up to three presets) or the free iOS\/Android app. No air lines or wiring have to run through the cab. The EZ Mount versions put the manifold and upgraded heavy-duty compressor on a factory-assembled bracket, which makes install quicker. The Tank kit combines the manifold and compressor into a tank system. The App-Only kit has no handheld controller.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual-path control, adjusts each air spring separately\u003c\/li\u003e\n\u003cli\u003eWireless handheld and free mobile app\u003c\/li\u003e\n\u003cli\u003eNo air lines or wiring through the cab\u003c\/li\u003e\n\u003cli\u003eTwo-year limited warranty plus a 60-day money-back guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Pick your kit from the Kit menu. Each option is its own Air Lift part number, so match it to your setup (standard, EZ Mount, App-Only or Tank) before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the box:\u003c\/strong\u003e Manifold, 12V compressor, wiring harness, installation hardware and an illustrated manual. The handheld controller comes in every kit except App-Only. EZ Mount kits come on a pre-assembled bracket, and the Tank kit adds the tank.\u003c\/p\u003e\u003cp\u003eQuestions on fitment? Call the shop at (806) 503-2161.\u003c\/p\u003e","brand":"Air Lift","offers":[{"title":"WirelessAir App-Only (No Controller) w\/ EZ Mount","offer_id":68012588105960,"sku":"73000EZ","price":755.99,"currency_code":"USD","in_stock":true},{"title":"WirelessAir Tank Kit w\/ EZ Mount","offer_id":68012588138728,"sku":"74100EZ","price":1363.99,"currency_code":"USD","in_stock":true},{"title":"WirelessAir V2 (Standard Mount)","offer_id":68012588171496,"sku":"74000","price":778.99,"currency_code":"USD","in_stock":true},{"title":"WirelessAir V2 w\/ EZ Mount","offer_id":68012588204264,"sku":"74000EZ","price":936.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/832158c1acde8383e03ee6f8752a060d.jpg?v=1793118977"},{"product_id":"carli-long-travel-air-bag-system-for-4-5in-lift-systems-2008-2016-ford-f-250-f-350-super-duty-4x4-with-3-5in-axle-tube","title":"Carli Long Travel Air Bag System for 4.5in Lift Systems - 2008-2016 Ford F-250\/F-350 Super Duty 4x4 with 3.5in axle tube","description":"\u003cp\u003eYou are looking at the Long Travel Air Bag System for 4.5in Lift Systems - 2008-2016 Ford F-250\/F-350 Super Duty 4x4 with 3.5in axle tube. Carli's Long Travel Air Bag System restores payload on a Carli-lifted Super Duty running full progressive springs, without taking away rear wheel travel. Run the bags manually or tie them into onboard air.\u003c\/p\u003e\u003cp\u003eThis listing is Carli part number CS-FLTB-08, built for 2008-2016 Ford F-250\/F-350 Super Duty 4x4 with 3.5in axle tube.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2,000 lb capacity per bag at 100 psi (Carli)\u003c\/li\u003e\n\u003cli\u003eAdjustable rear loaded height\u003c\/li\u003e\n\u003cli\u003eSupports up to 12 inches of travel\u003c\/li\u003e\n\u003cli\u003eManual fill included; works with onboard air (1\/4in line)\u003c\/li\u003e\n\u003cli\u003eSupports up to 12in of rear wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2008-2016 Ford F-250\/F-350 Super Duty 4x4 with 3.5in axle tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeads up:\u003c\/strong\u003e Compatible with rear lifts that level to a 4.5in Front Suspension System ONLY.\u003c\/p\u003e\u003ch3\u003eSpecs at a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number CS-FLTB-08, about 44 lb shipping weight\u003c\/li\u003e\n\u003cli\u003eProduct type: suspension kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eThe bags mount between the frame and axle on a Carli-lifted truck. Run the air lines away from the exhaust, then set your loaded height with the included manual fill or your onboard air.\u003c\/p\u003e\u003cp\u003eUnsure which Carli package suits your build? We match your year, engine, current lift and rear springs to Carli's application chart before anything ships.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help with fit? Call the shop at (806) 503-2161.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Carli","offers":[{"title":"Default Title","offer_id":68014269169896,"sku":"CS-FLTB-08","price":1096.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/d66374f48ab1e575bee27b31592e5975L.jpg?v=1793134791"},{"product_id":"carli-long-travel-air-bag-system-3-5in-axle-tube-2023-ford-f-250-f-350-super-duty-4x4","title":"Carli Long Travel Air Bag System - 3.5in Axle Tube - 2023-2026 Ford F-250\/F-350 Super Duty 4x4","description":"\u003cp\u003eThis page covers the Long Travel Air Bag System - 3.5in Axle Tube - 2023-2026 Ford F-250\/F-350 Super Duty 4x4. Carli's Long Travel Air Bag System restores payload on a Carli-lifted Super Duty running full progressive springs, without taking away rear wheel travel. Run the bags manually or tie them into onboard air.\u003c\/p\u003e\u003cp\u003eThis listing is Carli part number CS-FLTB-23-35, built for 2023-2026 Ford F-250\/F-350 Super Duty 4x4 with Carli 5.5in system and 3.5in axle tube. Carli says the 3.5in axle tube is what 2023+ F-250 4x4 gas and diesel trucks get without the Tremor or High Capacity Trailer Tow package, so confirm your axle tube before ordering.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2,000 lb capacity per bag at 100 psi (Carli)\u003c\/li\u003e\n\u003cli\u003eManual fill included; works with onboard air (1\/4in line)\u003c\/li\u003e\n\u003cli\u003eSupports up to 12 inches of travel\u003c\/li\u003e\n\u003cli\u003eAdjustable rear loaded height\u003c\/li\u003e\n\u003cli\u003eSupports up to 12in of rear wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2023-2026 Ford F-250\/F-350 Super Duty 4x4 with Carli 5.5in system and 3.5in axle tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeads up:\u003c\/strong\u003e Compatible with Carli 5.5in Suspension Systems ONLY.\u003c\/p\u003e\u003ch3\u003eSpecs at a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number CS-FLTB-23-35\u003c\/li\u003e\n\u003cli\u003eProduct type: suspension kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eThe bags mount between the frame and axle on a Carli-lifted truck. Run the air lines away from the exhaust, then set your loaded height with the included manual fill or your onboard air.\u003c\/p\u003e\u003cp\u003eNeed help picking the right Carli package? Send your year, engine, lift height and rear spring setup, and we will confirm it on Carli's chart before shipping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help with fit? Call the shop at (806) 503-2161.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Carli","offers":[{"title":"Default Title","offer_id":68014269300968,"sku":"CS-FLTB-23-35","price":1225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/CS-FLTB-23.jpg?v=1793134798"},{"product_id":"air-lift-performance-3h-air-management-system","title":"Air Lift Performance 3H Air Management System","description":"\u003cp\u003e3H is the top Air Lift Performance air management system. It reads ride height at all four corners with height sensors and also watches pressure, so it can hold the exact height you set even when the load in the car changes. The ECU, valves and solenoids all live inside one billet aluminum manifold, which keeps the install clean and the trunk tidy.\u003c\/p\u003e\u003cp\u003eYou run it from a billet-housed controller with a full-color screen or from the free phone app over the built-in wireless link. There are five height presets, and Preset Maintain re-levels the car on its own as weight shifts. The manifold can also run in pressure-only (3P) mode if you ever need it.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight sensing plus pressure control for repeatable ride height\u003c\/li\u003e\n\u003cli\u003eFive user-set height presets with automatic Preset Maintain\u003c\/li\u003e\n\u003cli\u003eController with full-color LCD and free wireless phone app\u003c\/li\u003e\n\u003cli\u003eAll-in-one anodized billet manifold with NPT ports\u003c\/li\u003e\n\u003cli\u003eIncludes four height sensors, wiring harness, auto-draining water filter and 60 ft. of air line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Universal air management. Works with any Air Lift Performance (or other) four-corner air spring setup. Pick the configuration that matches your air line size and whether you need a compressor and tank. Each option is its own Air Lift part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the box:\u003c\/strong\u003e 3H manifold with integrated ECU, 3H\/3P digital controller, four height sensors with wiring and mounting hardware, wiring harness, auto-draining inline water filter, 60 ft. of air line and hardware. The tank-and-compressor configurations add an aluminum air tank (4 gal. 5-port or 5 gal., polished), a VIAIR 444C compressor and the tank fittings.\u003c\/p\u003e\u003cp\u003eQuestions on fitment? Call the shop at (806) 503-2161.\u003c\/p\u003e","brand":"Air Lift","offers":[{"title":"1\/4 in. Air Line - No Tank \/ No Compressor","offer_id":68019455820008,"sku":"27690","price":2283.99,"currency_code":"USD","in_stock":true},{"title":"3\/8 in. Air Line - No Tank \/ No Compressor","offer_id":68019455852776,"sku":"27695","price":2346.99,"currency_code":"USD","in_stock":true},{"title":"3\/8 in. Air Line - 4 Gal 5-Port Polished Tank + VIAIR 444C","offer_id":68019455885544,"sku":"27797","price":2615.0,"currency_code":"USD","in_stock":true},{"title":"3\/8 in. Air Line - 5 Gal Polished Tank + VIAIR 444C","offer_id":68019455918312,"sku":"27798","price":2615.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/3f33e345525bc6a82bfacf59bf4d4e50.jpg?v=1793154226"},{"product_id":"air-lift-performance-3p-air-management-system","title":"Air Lift Performance 3P Air Management System","description":"\u003cp\u003e3P is the pressure-based version of the Air Lift Performance 3-series management. It uses the same billet all-in-one manifold (ECU, valves and solenoids inside) and the same controller as 3H, but it sets each corner by pressure instead of height. It is a solid, simpler setup for most bagged cars, and you can add height sensors later to turn it into a 3H system.\u003c\/p\u003e\u003cp\u003eYou get five pressure presets, Preset Maintain to hold your set pressures, and the free phone app over built-in wireless. An accelerometer helps the system make accurate adjustments.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive pressure-based presets with Preset Maintain\u003c\/li\u003e\n\u003cli\u003eUpgradeable to height-based 3H with sensors\u003c\/li\u003e\n\u003cli\u003eController with full-color LCD and free wireless phone app\u003c\/li\u003e\n\u003cli\u003eAnodized billet manifold with NPT ports for a clean install\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Universal air management. Works with any Air Lift Performance (or other) four-corner air spring setup. Pick the configuration that matches your air line size and whether you need a compressor and tank. Each option is its own Air Lift part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the box:\u003c\/strong\u003e 3P manifold with integrated ECU, 3H\/3P digital controller, wiring harness, air line and hardware. No tank or compressor; add your own or choose a 3H tank kit.\u003c\/p\u003e\u003cp\u003eQuestions on fitment? Call the shop at (806) 503-2161.\u003c\/p\u003e","brand":"Air Lift","offers":[{"title":"1\/4 in. Air Line - No Tank \/ No Compressor","offer_id":68019456082152,"sku":"27680","price":1407.5,"currency_code":"USD","in_stock":true},{"title":"3\/8 in. Air Line - No Tank \/ No Compressor","offer_id":68019456114920,"sku":"27685","price":1461.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/651c2a16210d2cd4b8a985010feaba16.jpg?v=1793154228"},{"product_id":"air-lift-performance-alp4-air-management-system","title":"Air Lift Performance ALP4 Air Management System","description":"\u003cp\u003eALP4 is the newest Air Lift Performance management system. It packs the ECU, solenoids and pressure sensors into a compact black-anodized billet manifold, and it runs from a 3.5 in. full-color touchscreen controller with four physical buttons. The controller dims itself at night.\u003c\/p\u003e\u003cp\u003eThe software is the big upgrade: smarter ride adjustment with learning and road filtering, a slow lift\/lower zone near minimum height, Show Mode and Standby so you can use the system with the car off, Valet Mode with lockouts, built-in diagnostics and a compressor health test. You can add the Air Lift height upgrade kit later.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.5 in. touchscreen controller with physical buttons and auto-dimming\u003c\/li\u003e\n\u003cli\u003eShow Mode, Standby and Valet Mode\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics and compressor performance test\u003c\/li\u003e\n\u003cli\u003eAdjustable LED colors on the manifold cover and controller\u003c\/li\u003e\n\u003cli\u003ePlug-and-play harness; upgradeable to height-based control\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Universal air management. Works with any Air Lift Performance (or other) four-corner air spring setup. Pick the configuration that matches your air line size and whether you need a compressor and tank. Each option is its own Air Lift part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the box:\u003c\/strong\u003e ALP4 manifold with integrated ECU, solenoids and pressure sensors, touchscreen controller, plug-and-play wiring harness, air line and hardware. No tank or compressor.\u003c\/p\u003e\u003cp\u003eQuestions on fitment? Call the shop at (806) 503-2161.\u003c\/p\u003e","brand":"Air Lift","offers":[{"title":"1\/4 in. Air Line - No Tank \/ No Compressor","offer_id":68019456344296,"sku":"27480","price":1863.99,"currency_code":"USD","in_stock":true},{"title":"3\/8 in. Air Line - No Tank \/ No Compressor","offer_id":68019456377064,"sku":"27485","price":1916.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/6ab05ee9177219d8feb7c2f1c23bebf0L.jpg?v=1793154230"},{"product_id":"air-lift-performance-4-way-manual-control-system","title":"Air Lift Performance 4-Way Manual Control System","description":"\u003cp\u003eThe 4-Way Manual Control System is the simple, no-electronics way to run air suspension. Four paddle valves give you separate control of every corner, and two dual-needle gauges show all four pressures at a glance. It pairs well with gauge and pillar pods.\u003c\/p\u003e\u003cp\u003eThe kit comes with a VIAIR 100% duty cycle compressor, a 4 gallon tank and 1\/4 in. air line for smooth, accurate adjustments up to 175 psi. A stainless switch plate finishes it off.\u003c\/p\u003e\u003ch3\u003eWhy we like it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIndependent control of all four corners\u003c\/li\u003e\n\u003cli\u003eVIAIR 100% duty cycle compressor\u003c\/li\u003e\n\u003cli\u003e4 gallon storage tank\u003c\/li\u003e\n\u003cli\u003eTwo dual-needle gauges and stainless switch plate\u003c\/li\u003e\n\u003cli\u003eMax system pressure 175 psi\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Universal air management. Works with any Air Lift Performance (or other) four-corner air spring setup. Pick the kit that matches your air line size and whether you need a compressor and tank. Each option is its own Air Lift part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the box:\u003c\/strong\u003e VIAIR continuous-duty compressor, 4 gallon tank, four paddle valves, two dual-needle gauges, switch plate, 1\/4 in. air line, fittings and hardware.\u003c\/p\u003e\u003cp\u003eQuestions on fitment? Call the shop at (806) 503-2161.\u003c\/p\u003e","brand":"Air Lift","offers":[{"title":"4-Way Manual - 1\/4 in. Line, 4 Gal Tank, 100% Duty Compressor","offer_id":68019457523944,"sku":"27666","price":1097.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/b7797fb4d529a88606f2a777eade46cd.jpg?v=1793154230"},{"product_id":"firestone-ride-rite-air-spring-kit-2021-2026-ford-bronco-2649","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2021-2026 Ford Bronco (excludes Bronco Sport and Bronco Raptor)","description":"\u003cp\u003eBuilt for the 2021-2026 Ford Bronco (excludes Bronco Sport and Bronco Raptor), this Firestone Ride-Rite kit adds two air helper springs between the frame rails and the rear axle, so the stock rear springs get help only when you ask for it. Add pressure before hitching up or loading the bed and the Ford Bronco sits level, so the front tires keep their grip, the headlights stay pointed at the road and braking feels normal again. With no load, lower the pressure and the ride quality stays close to how the truck left the factory. Whether it is a trailer or a full cargo area, a Ford Bronco stays flatter with help out back.\u003c\/p\u003e\u003cp\u003eThe springs fill independently, one valve per side, so a lopsided load like a transfer tank or a side-heavy tool box can be leveled out with a few extra PSI where it is needed. The pair is rated for up to 5,000 lbs of load-leveling capacity; stay within your truck's GVWR.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStops rear sag when towing or hauling\u003c\/li\u003e\n\u003cli\u003eAir pressure sets the support level for whatever you are carrying\u003c\/li\u003e\n\u003cli\u003eRun different pressures per side for lopsided cargo\u003c\/li\u003e\n\u003cli\u003eIncluded brackets position each spring between the frame rail and axle\u003c\/li\u003e\n\u003cli\u003eSteadier handling, better steering feel and more confident stops when loaded\u003c\/li\u003e\n\u003cli\u003eRun a minimum of 5 PSI at all times to protect the springs\u003c\/li\u003e\n\u003cli\u003eRated for 5,000 lbs of leveling support; stay under GVWR\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2649 (W217602649)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 23.4 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555180259\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2021-2026 Ford Bronco (excludes Bronco Sport and Bronco Raptor)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eIn the box: two air helper springs, the brackets for this application, mounting hardware, air line and two inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003ePlan on a bolt-on job with basic hand tools; the brackets are included. Figure about 1-2 hours for most installs. Route air lines well away from heat and moving parts, spray-check the fittings for leaks, and hold at least 5 PSI in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043324719336,"sku":"2649","price":471.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/6b08614b6d9f3aa50f7886085aee9015L.jpg?v=1793820909"},{"product_id":"firestone-coil-rite-air-spring-kit-2005-2018-ford-f-250-f-350-4wd-4160","title":"Firestone Coil-Rite Front Air Helper Spring Kit - 2005-2018 Ford F-250\/F-350 Super Duty 4WD","description":"\u003cp\u003eCoil-Rite air helper springs for the 2005-2018 Ford F-250\/F-350 Super Duty 4WD install inside the factory coil springs. Add air and the springs firm up, so the truck stays level with a plow, winch bumper or other heavy accessory up front. Release pressure when the load comes off and the ride softens back up. You set pressure the same way you air up a tire. On a heavy-duty Ford F-250\/F-350 Super Duty, that usually means a gooseneck, a fifth-wheel or a bed full of equipment.\u003c\/p\u003e\u003cp\u003eRated 500 to 1,000 lbs per pair in durable polyurethane; do not exceed GVWR. A level truck aims its headlights properly, steers and brakes better and wears tires more evenly.\u003c\/p\u003e\u003cp\u003eFront-axle kit for 4WD trucks only. A good match for trucks running a plow, winch bumper or other heavy front-end accessory.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstalls inside the stock coils\u003c\/li\u003e\n\u003cli\u003eHeadlights stay on the road under load\u003c\/li\u003e\n\u003cli\u003eKeeps the stance level when loaded\u003c\/li\u003e\n\u003cli\u003eFits gas and diesel models\u003c\/li\u003e\n\u003cli\u003e500-1,000 lbs support per pair, within GVWR\u003c\/li\u003e\n\u003cli\u003eLeft and right inflation valves\u003c\/li\u003e\n\u003cli\u003eImproves loaded handling and braking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 4160 (W237604160)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 3.8 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555112090\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2005-2018 Ford F-250\/F-350 Super Duty 4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eBoth helper springs, the supports, hardware, air line and fill valves come in the kit.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eGoes inside the coils with hand tools, no welding needed. Keep the air lines away from exhaust heat and moving parts, and never let the springs fall below 5 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043324817640,"sku":"4160","price":159.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/5632a64b155eae789a0337c73e4df8de.jpg?v=1793220508"},{"product_id":"firestone-coil-rite-air-spring-kit-2010-2018-ram-1500-4185","title":"Firestone Coil-Rite Rear Air Helper Spring Kit - 2010-2018 Ram 1500 2WD\/4WD (rear coil spring trucks)","description":"\u003cp\u003eBuilt for the 2010-2018 Ram 1500 2WD\/4WD (rear coil spring trucks), Coil-Rite helpers sit inside the factory coil springs. Add air and the springs firm up, so the truck stays level with a loaded bed or a trailer on the hitch. Running empty, lower the pressure for a soft ride. Adjusting works just like filling a tire. On a half-ton Ram 1500, a camper trailer or a bed of mulch is usually enough to make the rear sag.\u003c\/p\u003e\u003cp\u003eRated 500 to 1,000 lbs per pair in durable polyurethane; do not exceed GVWR. Level stance means better braking and steering, proper headlight aim and less uneven tire wear.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIn-coil design\u003c\/li\u003e\n\u003cli\u003eProper headlight aim when loaded\u003c\/li\u003e\n\u003cli\u003eBetter braking, steering and balance with weight on board\u003c\/li\u003e\n\u003cli\u003eHelps prevent bottoming with weight on board\u003c\/li\u003e\n\u003cli\u003eEach side adjusts on its own valve\u003c\/li\u003e\n\u003cli\u003eRated 500 to 1,000 lbs per pair (GVWR applies)\u003c\/li\u003e\n\u003cli\u003eCompatible with gas and diesel engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 4185 (W237604185)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 4.1 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555119785\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2010-2018 Ram 1500 2WD\/4WD (rear coil spring trucks)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eYou get two air springs, spring supports, hardware, air line and two inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eNo welding: the bags install inside the coils with hand tools. Run the lines away from hot or moving parts and keep at least 5 PSI in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043325505768,"sku":"4185","price":197.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/e09f5cc2bc8d2d4fb6a6dba6e013b33c.jpg?v=1793220518"},{"product_id":"firestone-coil-rite-air-spring-kit-2019-2025-ram-1500-4130","title":"Firestone Coil-Rite Rear Air Helper Spring Kit - 2019-2025 Ram 1500 2WD\/4WD (new body style, rear coil spring trucks)","description":"\u003cp\u003eThis Coil-Rite kit for the 2019-2025 Ram 1500 2WD\/4WD (new body style, rear coil spring trucks) places polyurethane air bags inside the stock coils. Add air and the springs firm up, so the truck stays level with a loaded bed or a trailer on the hitch. Running empty, lower the pressure for a soft ride. You set pressure the same way you air up a tire. On a half-ton Ram 1500, a camper trailer or a bed of mulch is usually enough to make the rear sag.\u003c\/p\u003e\u003cp\u003eThe polyurethane Coil-Rite bags support 500 to 1,000 lbs per pair; the truck's GVWR still applies. Keeping it level improves steering and braking, keeps lights on the road and evens out tire wear.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSits within the factory coil springs\u003c\/li\u003e\n\u003cli\u003eLevels the truck and resists bottoming out under load\u003c\/li\u003e\n\u003cli\u003eGas or diesel, it works the same\u003c\/li\u003e\n\u003cli\u003eIndividual valve for each side\u003c\/li\u003e\n\u003cli\u003eKeeps headlight aim correct with a load\u003c\/li\u003e\n\u003cli\u003eImproves loaded handling and braking\u003c\/li\u003e\n\u003cli\u003eRated 500 to 1,000 lbs per pair (GVWR applies)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 4130 (W237604130)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 4.4 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555164594\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2019-2025 Ram 1500 2WD\/4WD (new body style, rear coil spring trucks)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eTwo air helper springs with upper and lower brackets, mounting hardware, air line and inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eA hand-tool install inside the coil springs, with no welding. Route lines clear of the exhaust and suspension travel and hold a 5 PSI minimum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043325604072,"sku":"4130","price":197.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/0e616886d2f647b7a85b94d854723cd0L.jpg?v=1793220519"},{"product_id":"firestone-ride-rite-air-spring-kit-2007-2017-ram-3500-cab-chassis-2478","title":"Firestone Ride-Rite Front Air Helper Spring Kit - 2007-2017 Ram 3500 Cab \u0026 Chassis 2WD\/4WD","description":"\u003cp\u003eFirestone Ride-Rite air helper springs mount between the frame and front axle of your 2007-2017 Ram 3500 Cab \u0026amp; Chassis 2WD\/4WD and give the factory leaf springs adjustable help. Pump them up before the trailer goes on the ball or the bed fills up, and the Ram 3500 Cab \u0026amp; Chassis stays flat instead of nose-up, with steady steering, normal braking and headlights aimed where they belong. Once the load comes off, let air out and you are back to a near-factory ride. Upfitted Ram 3500 Cab \u0026amp; Chassis trucks with service bodies or dump beds get steady support from this kit.\u003c\/p\u003e\u003cp\u003eBecause each spring has its own fill valve, you can correct body lean from off-center cargo, such as a camper or a tank mounted to one side of the bed. Rated load leveling for this kit is up to 5,000 lbs per pair, and the truck's GVWR still applies. This is a front-axle kit.\u003c\/p\u003e\u003cp\u003eFront-axle kit, built to carry the extra weight of plows, service bodies or heavy front bumpers on cab and chassis trucks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolds the Ram 3500 Cab \u0026amp; Chassis level with a trailer hooked up or the bed full\u003c\/li\u003e\n\u003cli\u003eLess sway and better control with weight in the bed or on the hitch\u003c\/li\u003e\n\u003cli\u003e5 PSI minimum pressure, loaded or empty\u003c\/li\u003e\n\u003cli\u003eUp to 5,000 lbs of load-leveling capacity (GVWR still applies)\u003c\/li\u003e\n\u003cli\u003eIndependent left and right fill valves for uneven loads\u003c\/li\u003e\n\u003cli\u003eBracket install calls for some drilling\u003c\/li\u003e\n\u003cli\u003eDial in more or less support with a few PSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2478 (W217602478)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 36.9 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555118788\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2007-2017 Ram 3500 Cab \u0026amp; Chassis 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eThe box holds both air springs, the upper and lower brackets, hardware, air line and fill valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eMostly a hand-tool bolt-on, though the brackets need a few holes drilled. Most installs wrap up in 2-3 hours. After install, check all fittings for leaks, make sure the lines stay away from exhaust heat and suspension travel, and keep 5 PSI minimum in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043325669608,"sku":"2478","price":594.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/659151c64225f7f683da382a275d6d17.jpg?v=1793220520"},{"product_id":"firestone-ride-rite-air-spring-kit-2010-2018-ram-1500-2595","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2010-2018 Ram 1500 2WD\/4WD (not for Rebel models)","description":"\u003cp\u003eThis Ride-Rite kit is matched to the 2010-2018 Ram 1500 2WD\/4WD (not for Rebel models): a pair of Firestone air helper springs bolts in between the frame and rear axle and backs up the factory rear springs with support you set with air. Put air in ahead of a towing or hauling job and the rear end holds its height, which keeps weight on the front axle for steering and braking and keeps your lights out of oncoming drivers' eyes. Running empty? Drop the pressure and the Ram 1500 rides close to stock. Half-ton Ram 1500 owners notice it most with a boat or travel trailer on the hitch.\u003c\/p\u003e\u003cp\u003eThe springs fill independently, one valve per side, so a lopsided load like a transfer tank or a side-heavy tool box can be leveled out with a few extra PSI where it is needed. Rated load leveling for this kit is up to 5,000 lbs per pair, and the truck's GVWR still applies.\u003c\/p\u003e\u003cp\u003eFirestone lists this kit as not for Rebel trucks. Call us to confirm fit on special-edition trims.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKeeps the rear from squatting under tongue weight or a loaded bed\u003c\/li\u003e\n\u003cli\u003eLoaded-truck steering and braking feel closer to normal\u003c\/li\u003e\n\u003cli\u003eOne valve per spring to correct side-to-side lean\u003c\/li\u003e\n\u003cli\u003eUses factory mounting points, so the frame stays undrilled\u003c\/li\u003e\n\u003cli\u003eRun a minimum of 5 PSI at all times to protect the springs\u003c\/li\u003e\n\u003cli\u003e5,000 lb leveling capacity per kit, within your GVWR\u003c\/li\u003e\n\u003cli\u003eSupport adjusts with air pressure, from an empty bed to a full payload\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2595 (W217602595)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 19.4 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555160435\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2010-2018 Ram 1500 2WD\/4WD (not for Rebel models)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eA pair of air helper springs with supports, mounting hardware, air line and inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eThe brackets bolt to existing factory holes, so nothing gets drilled. With hand tools, most installs run about 1-2 hours. Keep the air line clear of the exhaust and anything that moves, leak-check every fitting when you finish, and never run below 5 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043325735144,"sku":"2595","price":757.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/4c7dc37169c663ef2e5ebf661dde83cfL.jpg?v=1793220520"},{"product_id":"firestone-ride-rite-air-spring-kit-2009-2014-ford-f-150-svt-raptor-2565","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2009-2014 Ford F-150 SVT Raptor","description":"\u003cp\u003eFirestone sized this Ride-Rite kit specifically for the 2009-2014 Ford F-150 SVT Raptor. The two air helper springs install above the rear axle, under the frame, and work alongside the factory rear springs instead of replacing them. Add pressure before hitching up or loading the bed and the Ford F-150 SVT Raptor sits level, so the front tires keep their grip, the headlights stay pointed at the road and braking feels normal again. Running empty? Drop the pressure and the Ford F-150 SVT Raptor rides close to stock. On a half-ton Ford F-150 SVT Raptor, a camper trailer or a bed of mulch is usually enough to make the rear sag.\u003c\/p\u003e\u003cp\u003eTwo separate inflation valves let you run the left and right springs at different pressures, handy when a slide-in camper, fuel transfer tank or tool box puts more weight on one side. Firestone rates the kit for as much as 5,000 lbs of leveling support. It does not raise your GVWR, so never load past it.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrings the back of the truck back up to level under load\u003c\/li\u003e\n\u003cli\u003eTune it for the job: low pressure empty, more pressure loaded\u003c\/li\u003e\n\u003cli\u003eTwo fill valves so each side can be leveled on its own\u003c\/li\u003e\n\u003cli\u003eLess sway and better control with weight in the bed or on the hitch\u003c\/li\u003e\n\u003cli\u003eNever let the springs drop below 5 PSI\u003c\/li\u003e\n\u003cli\u003eRated for 5,000 lbs of leveling support; stay under GVWR\u003c\/li\u003e\n\u003cli\u003eExpect to drill a few holes for the brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2565 (W217602565)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 33.4 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555151112\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2009-2014 Ford F-150 SVT Raptor\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eUpper and lower brackets, a pair of air helper springs, mounting hardware, air line and the inflation valves are all included.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eMostly a hand-tool bolt-on, though the brackets need a few holes drilled. Plan on 2-3 hours for most installs. After install, check all fittings for leaks, make sure the lines stay away from exhaust heat and suspension travel, and keep 5 PSI minimum in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043325767912,"sku":"2565","price":748.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/f24e353eec23c4175a9e1f559d83704b.jpg?v=1793220521"},{"product_id":"firestone-ride-rite-air-spring-kit-2017-2020-ford-f-250-f-350-2wd-2600","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2017-2020 Ford F-250\/F-350 Super Duty 2WD","description":"\u003cp\u003eFirestone sized this Ride-Rite kit specifically for the 2017-2020 Ford F-250\/F-350 Super Duty 2WD. The two air helper springs install above the rear axle, under the frame, and work alongside the factory rear springs instead of replacing them. Inflate before you load and the rear stops squatting, so the front end keeps the weight it needs to steer and stop, and your low beams stay on the pavement instead of the treetops. Bleed them back down when the bed is empty and the ride goes back to about where the factory had it. That matters on a Ford F-250\/F-350 Super Duty that spends its weekends hooked to a stock trailer or a toy hauler.\u003c\/p\u003e\u003cp\u003eTwo separate inflation valves let you run the left and right springs at different pressures, handy when a slide-in camper, fuel transfer tank or tool box puts more weight on one side. Rated load leveling for this kit is up to 5,000 lbs per pair, and the truck's GVWR still applies.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStops rear sag when towing or hauling\u003c\/li\u003e\n\u003cli\u003eNever let the springs drop below 5 PSI\u003c\/li\u003e\n\u003cli\u003eUp to 5,000 lbs of load-leveling capacity (GVWR still applies)\u003c\/li\u003e\n\u003cli\u003eOne valve per spring to correct side-to-side lean\u003c\/li\u003e\n\u003cli\u003ePuts weight back on the front tires for steering and braking\u003c\/li\u003e\n\u003cli\u003eSupport adjusts with air pressure, from an empty bed to a full payload\u003c\/li\u003e\n\u003cli\u003eNo drilling: the brackets use holes already in the frame\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2600 (W217602600)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 43.2 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555160503\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2017-2020 Ford F-250\/F-350 Super Duty 2WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eA pair of air helper springs with supports, mounting hardware, air line and inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eNothing to drill: the kit mounts using holes already in the chassis. Budget roughly 1-2 hours with basic hand tools. Route air lines well away from heat and moving parts, spray-check the fittings for leaks, and hold at least 5 PSI in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043325833448,"sku":"2600","price":696.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/15407658926312.jpg?v=1793820912"},{"product_id":"firestone-ride-rite-air-spring-kit-2011-2016-ford-f-250-f-350-2597","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2011-2016 Ford F-250\/F-350 Super Duty and 2011-2013 F-450 pickup, 2WD\/4WD","description":"\u003cp\u003eBuilt for the 2011-2016 Ford F-250\/F-350 Super Duty and 2011-2013 F-450 pickup, 2WD\/4WD, this Firestone Ride-Rite kit adds two air helper springs between the frame rails and the rear axle, so the stock rear springs get help only when you ask for it. Inflate before you load and the rear stops squatting, so the front end keeps the weight it needs to steer and stop, and your low beams stay on the pavement instead of the treetops. Once the load comes off, let air out and you are back to a near-factory ride. On a heavy-duty Ford F-250\/F-350 Super Duty and F-450, that usually means a gooseneck, a fifth-wheel or a bed full of equipment.\u003c\/p\u003e\u003cp\u003eBecause each spring has its own fill valve, you can correct body lean from off-center cargo, such as a camper or a tank mounted to one side of the bed. Firestone rates the kit for as much as 5,000 lbs of leveling support. It does not raise your GVWR, so never load past it.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKeeps the rear from squatting under tongue weight or a loaded bed\u003c\/li\u003e\n\u003cli\u003eRated for 5,000 lbs of leveling support; stay under GVWR\u003c\/li\u003e\n\u003cli\u003eUses factory mounting points, so the frame stays undrilled\u003c\/li\u003e\n\u003cli\u003eSupport adjusts with air pressure, from an empty bed to a full payload\u003c\/li\u003e\n\u003cli\u003eNever let the springs drop below 5 PSI\u003c\/li\u003e\n\u003cli\u003eRun different pressures per side for lopsided cargo\u003c\/li\u003e\n\u003cli\u003ePuts weight back on the front tires for steering and braking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2597 (W217602597)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 39.9 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555160701\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2016 Ford F-250\/F-350 Super Duty and 2011-2013 F-450 pickup, 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eA pair of air helper springs with supports, mounting hardware, air line and inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eIt goes in using factory mounting holes, with no drilling. Typical time in the driveway is 1-2 hours with hand tools. Keep the air line clear of the exhaust and anything that moves, leak-check every fitting when you finish, and never run below 5 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043325997288,"sku":"2597","price":671.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/24fdee04dc414423fdc8a55dc127f968_6b2edf48-c620-4380-a916-33a20369b2eb.jpg?v=1793220522"},{"product_id":"firestone-ride-rite-air-spring-kit-2008-2010-ford-f-450-2446","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2008-2010 Ford F-450 Super Duty pickup 2WD\/4WD","description":"\u003cp\u003eThis Ride-Rite kit is matched to the 2008-2010 Ford F-450 Super Duty pickup 2WD\/4WD: a pair of Firestone air helper springs bolts in between the frame and rear axle and backs up the factory rear springs with support you set with air. Put air in ahead of a towing or hauling job and the rear end holds its height, which keeps weight on the front axle for steering and braking and keeps your lights out of oncoming drivers' eyes. Bleed them back down when the bed is empty and the ride goes back to about where the factory had it. That matters on a Ford F-450 Super Duty pickup that spends its weekends hooked to a stock trailer or a toy hauler.\u003c\/p\u003e\u003cp\u003eBecause each spring has its own fill valve, you can correct body lean from off-center cargo, such as a camper or a tank mounted to one side of the bed. The pair is rated for up to 5,000 lbs of load-leveling capacity; stay within your truck's GVWR.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrings the back of the truck back up to level under load\u003c\/li\u003e\n\u003cli\u003e5 PSI minimum pressure, loaded or empty\u003c\/li\u003e\n\u003cli\u003eTwo fill valves so each side can be leveled on its own\u003c\/li\u003e\n\u003cli\u003eAir pressure sets the support level for whatever you are carrying\u003c\/li\u003e\n\u003cli\u003eBolts up through existing factory holes, no drilling\u003c\/li\u003e\n\u003cli\u003eUp to 5,000 lbs of load-leveling capacity (GVWR still applies)\u003c\/li\u003e\n\u003cli\u003eSteadier handling, better steering feel and more confident stops when loaded\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2446 (W217602446)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 36.9 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555117392\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2008-2010 Ford F-450 Super Duty pickup 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eThe box holds both air springs, the upper and lower brackets, hardware, air line and fill valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eNothing to drill: the kit mounts using holes already in the chassis. Typical time in the driveway is 1-2 hours with hand tools. Keep the air line clear of the exhaust and anything that moves, leak-check every fitting when you finish, and never run below 5 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043326128360,"sku":"2446","price":623.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/1dffd998bd75670464b70cab967a8654.jpg?v=1793220524"},{"product_id":"firestone-ride-rite-air-spring-kit-2003-2012-dodge-ram-2500-2299","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2003-2012 Dodge\/Ram 2500 and 3500 pickup 2WD\/4WD","description":"\u003cp\u003eIf your Dodge\/Ram 2500 and 3500 pickup sags every time the bed or the hitch gets weight on it, this Ride-Rite kit is the fix: Firestone air helper springs sit between the frame and rear axle of the 2003-2012 Dodge\/Ram 2500 and 3500 pickup 2WD\/4WD and carry part of the load. Inflate before you load and the rear stops squatting, so the front end keeps the weight it needs to steer and stop, and your low beams stay on the pavement instead of the treetops. With no load, lower the pressure and the ride quality stays close to how the truck left the factory. That matters on a Dodge\/Ram 2500 and 3500 pickup that spends its weekends hooked to a stock trailer or a toy hauler.\u003c\/p\u003e\u003cp\u003eThe springs fill independently, one valve per side, so a lopsided load like a transfer tank or a side-heavy tool box can be leveled out with a few extra PSI where it is needed. The pair is rated for up to 5,000 lbs of load-leveling capacity; stay within your truck's GVWR.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolds the Dodge\/Ram 2500 and 3500 pickup level with a trailer hooked up or the bed full\u003c\/li\u003e\n\u003cli\u003eOne valve per spring to correct side-to-side lean\u003c\/li\u003e\n\u003cli\u003e5,000 lb leveling capacity per kit, within your GVWR\u003c\/li\u003e\n\u003cli\u003eBolts up through existing factory holes, no drilling\u003c\/li\u003e\n\u003cli\u003eDial in more or less support with a few PSI\u003c\/li\u003e\n\u003cli\u003e5 PSI minimum pressure, loaded or empty\u003c\/li\u003e\n\u003cli\u003ePuts weight back on the front tires for steering and braking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2299 (W217602299)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 28.5 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555104965\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2003-2012 Dodge\/Ram 2500 and 3500 pickup 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eUpper and lower brackets, a pair of air helper springs, mounting hardware, air line and the inflation valves are all included.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eNothing to drill: the kit mounts using holes already in the chassis. Typical time in the driveway is 1-2 hours with hand tools. After install, check all fittings for leaks, make sure the lines stay away from exhaust heat and suspension travel, and keep 5 PSI minimum in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043326193896,"sku":"2299","price":594.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/cbae84eb70e4b6dcbafbebf830a7e510.jpg?v=1793220524"},{"product_id":"firestone-ride-rite-air-spring-kit-2007-2018-chevy-silverado-1500-gmc-sierra-1500-2430","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2007-2018 Chevrolet Silverado 1500 \/ GMC Sierra 1500 2WD\/4WD (not 2015-2018 Denali)","description":"\u003cp\u003eFirestone sized this Ride-Rite kit specifically for the 2007-2018 Chevrolet Silverado 1500 \/ GMC Sierra 1500 2WD\/4WD (not 2015-2018 Denali). The two air helper springs install above the rear axle, under the frame, and work alongside the factory rear springs instead of replacing them. Pump them up before the trailer goes on the ball or the bed fills up, and the Chevrolet Silverado 1500 \/ GMC Sierra 1500 stays flat instead of nose-up, with steady steering, normal braking and headlights aimed where they belong. With no load, lower the pressure and the ride quality stays close to how the truck left the factory. A Chevrolet Silverado 1500 \/ GMC Sierra 1500 carries a lot for its size, and a little air goes a long way when the bed fills up.\u003c\/p\u003e\u003cp\u003eBecause each spring has its own fill valve, you can correct body lean from off-center cargo, such as a camper or a tank mounted to one side of the bed. Firestone rates the kit for as much as 5,000 lbs of leveling support. It does not raise your GVWR, so never load past it.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolds the Chevrolet Silverado 1500 \/ GMC Sierra 1500 level with a trailer hooked up or the bed full\u003c\/li\u003e\n\u003cli\u003eUses factory mounting points, so the frame stays undrilled\u003c\/li\u003e\n\u003cli\u003e5,000 lb leveling capacity per kit, within your GVWR\u003c\/li\u003e\n\u003cli\u003eIndependent left and right fill valves for uneven loads\u003c\/li\u003e\n\u003cli\u003eLoaded-truck steering and braking feel closer to normal\u003c\/li\u003e\n\u003cli\u003eRun a minimum of 5 PSI at all times to protect the springs\u003c\/li\u003e\n\u003cli\u003eAir pressure sets the support level for whatever you are carrying\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2430 (W217602430)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 26.6 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555115725\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2007-2018 Chevrolet Silverado 1500 \/ GMC Sierra 1500 2WD\/4WD (not 2015-2018 Denali)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eUpper and lower brackets, a pair of air helper springs, mounting hardware, air line and the inflation valves are all included.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eIt goes in using factory mounting holes, with no drilling. Typical time in the driveway is 1-2 hours with hand tools. Route air lines well away from heat and moving parts, spray-check the fittings for leaks, and hold at least 5 PSI in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043326324968,"sku":"2430","price":594.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/24fdee04dc414423fdc8a55dc127f968_2da68d6f-93a9-44e7-959d-e62f7fb13ca3.jpg?v=1793220525"},{"product_id":"firestone-ride-rite-air-spring-kit-2005-2017-toyota-tacoma-2wd-prerunner-2407","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2005-2017 Toyota Tacoma 2WD PreRunner","description":"\u003cp\u003eIf your Toyota Tacoma PreRunner sags every time the bed or the hitch gets weight on it, this Ride-Rite kit is the fix: Firestone air helper springs sit between the frame and rear axle of the 2005-2017 Toyota Tacoma 2WD PreRunner and carry part of the load. Add pressure before hitching up or loading the bed and the Toyota Tacoma PreRunner sits level, so the front tires keep their grip, the headlights stay pointed at the road and braking feels normal again. Running empty? Drop the pressure and the Toyota Tacoma PreRunner rides close to stock. Overlanders and weekend towers running a Toyota Tacoma PreRunner get the most from adjustable support.\u003c\/p\u003e\u003cp\u003eTwo separate inflation valves let you run the left and right springs at different pressures, handy when a slide-in camper, fuel transfer tank or tool box puts more weight on one side. The pair is rated for up to 5,000 lbs of load-leveling capacity; stay within your truck's GVWR.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKeeps the rear from squatting under tongue weight or a loaded bed\u003c\/li\u003e\n\u003cli\u003eDial in more or less support with a few PSI\u003c\/li\u003e\n\u003cli\u003eSteadier handling, better steering feel and more confident stops when loaded\u003c\/li\u003e\n\u003cli\u003eNo drilling: the brackets use holes already in the frame\u003c\/li\u003e\n\u003cli\u003eOne valve per spring to correct side-to-side lean\u003c\/li\u003e\n\u003cli\u003e5 PSI minimum pressure, loaded or empty\u003c\/li\u003e\n\u003cli\u003eUp to 5,000 lbs of load-leveling capacity (GVWR still applies)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2407 (W217602407)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 25 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555112793\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2005-2017 Toyota Tacoma 2WD PreRunner\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eUpper and lower brackets, a pair of air helper springs, mounting hardware, air line and the inflation valves are all included.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eIt goes in using factory mounting holes, with no drilling. Budget roughly 1-2 hours with basic hand tools. Keep the air line clear of the exhaust and anything that moves, leak-check every fitting when you finish, and never run below 5 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043327176936,"sku":"2407","price":594.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/8dd7fd066038e429c673ca4e1b3294f4L.jpg?v=1793220539"},{"product_id":"firestone-ride-rite-air-spring-kit-2005-2017-nissan-frontier-2558","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2005-2017 Nissan Frontier 2WD\/4WD","description":"\u003cp\u003eThis Ride-Rite kit is matched to the 2005-2017 Nissan Frontier 2WD\/4WD: a pair of Firestone air helper springs bolts in between the frame and rear axle and backs up the factory rear springs with support you set with air. Pump them up before the trailer goes on the ball or the bed fills up, and the Nissan Frontier stays flat instead of nose-up, with steady steering, normal braking and headlights aimed where they belong. Once the load comes off, let air out and you are back to a near-factory ride. On a Nissan Frontier, a small camper or a bed full of gear can bottom the rear end; this keeps it level.\u003c\/p\u003e\u003cp\u003eTwo separate inflation valves let you run the left and right springs at different pressures, handy when a slide-in camper, fuel transfer tank or tool box puts more weight on one side. Firestone rates the kit for as much as 5,000 lbs of leveling support. It does not raise your GVWR, so never load past it.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStops rear sag when towing or hauling\u003c\/li\u003e\n\u003cli\u003e5 PSI minimum pressure, loaded or empty\u003c\/li\u003e\n\u003cli\u003eFrame-to-axle mounting with vehicle-specific brackets\u003c\/li\u003e\n\u003cli\u003eLoaded-truck steering and braking feel closer to normal\u003c\/li\u003e\n\u003cli\u003eTune it for the job: low pressure empty, more pressure loaded\u003c\/li\u003e\n\u003cli\u003eRated for 5,000 lbs of leveling support; stay under GVWR\u003c\/li\u003e\n\u003cli\u003eTwo fill valves so each side can be leveled on its own\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2558 (W217602558)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 19.8 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555149201\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2005-2017 Nissan Frontier 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eThe box holds both air springs, the upper and lower brackets, hardware, air line and fill valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eIt bolts on with common hand tools and the brackets supplied in the kit. Typical install time is around 1-2 hours. Route air lines well away from heat and moving parts, spray-check the fittings for leaks, and hold at least 5 PSI in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043327242472,"sku":"2558","price":594.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/8a73da8367b797c08f1cd20de7de9927.jpg?v=1793220539"},{"product_id":"firestone-ride-rite-air-spring-kit-2007-2018-toyota-tundra-2445","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2007-2018 Toyota Tundra 2WD\/4WD, including TRD","description":"\u003cp\u003eBuilt for the 2007-2018 Toyota Tundra 2WD\/4WD, including TRD, this Firestone Ride-Rite kit adds two air helper springs between the frame rails and the rear axle, so the stock rear springs get help only when you ask for it. Put air in ahead of a towing or hauling job and the rear end holds its height, which keeps weight on the front axle for steering and braking and keeps your lights out of oncoming drivers' eyes. Bleed them back down when the bed is empty and the ride goes back to about where the factory had it. On a half-ton Toyota Tundra, a camper trailer or a bed of mulch is usually enough to make the rear sag.\u003c\/p\u003e\u003cp\u003eTwo separate inflation valves let you run the left and right springs at different pressures, handy when a slide-in camper, fuel transfer tank or tool box puts more weight on one side. Firestone rates the kit for as much as 5,000 lbs of leveling support. It does not raise your GVWR, so never load past it.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKeeps the rear from squatting under tongue weight or a loaded bed\u003c\/li\u003e\n\u003cli\u003eIndependent left and right fill valves for uneven loads\u003c\/li\u003e\n\u003cli\u003eBolts up through existing factory holes, no drilling\u003c\/li\u003e\n\u003cli\u003eLess sway and better control with weight in the bed or on the hitch\u003c\/li\u003e\n\u003cli\u003eTune it for the job: low pressure empty, more pressure loaded\u003c\/li\u003e\n\u003cli\u003e5,000 lb leveling capacity per kit, within your GVWR\u003c\/li\u003e\n\u003cli\u003eNever let the springs drop below 5 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2445 (W217602445)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 20.4 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555117286\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2007-2018 Toyota Tundra 2WD\/4WD, including TRD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eThe box holds both air springs, the upper and lower brackets, hardware, air line and fill valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eThe brackets bolt to existing factory holes, so nothing gets drilled. Budget roughly 1-2 hours with basic hand tools. Keep the air line clear of the exhaust and anything that moves, leak-check every fitting when you finish, and never run below 5 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043327340776,"sku":"2445","price":594.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/cbcb15ebf8eee9c0644583080902871dL.jpg?v=1793220540"},{"product_id":"firestone-ride-rite-air-spring-kit-2000-2006-toyota-tundra-4wd-2245","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2000-2006 Toyota Tundra 4WD and 2WD TRD","description":"\u003cp\u003eIf your Toyota Tundra and TRD sags every time the bed or the hitch gets weight on it, this Ride-Rite kit is the fix: Firestone air helper springs sit between the frame and rear axle of the 2000-2006 Toyota Tundra 4WD and 2WD TRD and carry part of the load. Put air in ahead of a towing or hauling job and the rear end holds its height, which keeps weight on the front axle for steering and braking and keeps your lights out of oncoming drivers' eyes. With no load, lower the pressure and the ride quality stays close to how the truck left the factory. Weekend towing with a Toyota Tundra and TRD, whether a pontoon or a utility trailer, is where this pays off.\u003c\/p\u003e\u003cp\u003eBecause each spring has its own fill valve, you can correct body lean from off-center cargo, such as a camper or a tank mounted to one side of the bed. Rated load leveling for this kit is up to 5,000 lbs per pair, and the truck's GVWR still applies.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStops rear sag when towing or hauling\u003c\/li\u003e\n\u003cli\u003eRun different pressures per side for lopsided cargo\u003c\/li\u003e\n\u003cli\u003eLess sway and better control with weight in the bed or on the hitch\u003c\/li\u003e\n\u003cli\u003eRun a minimum of 5 PSI at all times to protect the springs\u003c\/li\u003e\n\u003cli\u003eA little drilling is needed to mount the brackets\u003c\/li\u003e\n\u003cli\u003eUp to 5,000 lbs of load-leveling capacity (GVWR still applies)\u003c\/li\u003e\n\u003cli\u003eSupport adjusts with air pressure, from an empty bed to a full payload\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2245 (W217602245)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 17.2 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555099797\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2000-2006 Toyota Tundra 4WD and 2WD TRD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eUpper and lower brackets, a pair of air helper springs, mounting hardware, air line and the inflation valves are all included.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eExpect basic hand tools plus a drill for the bracket holes. Plan on 2-3 hours for most installs. After install, check all fittings for leaks, make sure the lines stay away from exhaust heat and suspension travel, and keep 5 PSI minimum in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043327471848,"sku":"2245","price":594.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/c6ffcfaffa60802cde902f6d1f2d05cf.jpg?v=1793220541"},{"product_id":"firestone-ride-rite-air-spring-kit-2015-2025-ford-f-150-2582","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2015-2025 Ford F-150 2WD\/4WD (not Raptor)","description":"\u003cp\u003eBuilt for the 2015-2025 Ford F-150 2WD\/4WD (not Raptor), this Firestone Ride-Rite kit adds two air helper springs between the frame rails and the rear axle, so the stock rear springs get help only when you ask for it. Add pressure before hitching up or loading the bed and the Ford F-150 sits level, so the front tires keep their grip, the headlights stay pointed at the road and braking feels normal again. Running empty? Drop the pressure and the Ford F-150 rides close to stock. Light-duty trucks like the Ford F-150 squat early under tongue weight, which is exactly what this addresses.\u003c\/p\u003e\u003cp\u003eThe springs fill independently, one valve per side, so a lopsided load like a transfer tank or a side-heavy tool box can be leveled out with a few extra PSI where it is needed. Firestone rates the kit for as much as 5,000 lbs of leveling support. It does not raise your GVWR, so never load past it.\u003c\/p\u003e\u003cp\u003e2021 and newer F-150s with the factory onboard scale option use the inboard-mount kit 2627 instead.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStops rear sag when towing or hauling\u003c\/li\u003e\n\u003cli\u003eSupport adjusts with air pressure, from an empty bed to a full payload\u003c\/li\u003e\n\u003cli\u003eExpect to drill a few holes for the brackets\u003c\/li\u003e\n\u003cli\u003eUp to 5,000 lbs of load-leveling capacity (GVWR still applies)\u003c\/li\u003e\n\u003cli\u003eIndependent left and right fill valves for uneven loads\u003c\/li\u003e\n\u003cli\u003e5 PSI minimum pressure, loaded or empty\u003c\/li\u003e\n\u003cli\u003eLoaded-truck steering and braking feel closer to normal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2582 (W217602582)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 39.8 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555155059\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2025 Ford F-150 2WD\/4WD (not Raptor)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eA pair of air helper springs with supports, mounting hardware, air line and inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eExpect basic hand tools plus a drill for the bracket holes. Typical install time runs 2-3 hours. After install, check all fittings for leaks, make sure the lines stay away from exhaust heat and suspension travel, and keep 5 PSI minimum in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043327504616,"sku":"2582","price":594.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/4ade3bcc4152781cb6e86a8144beb620L.jpg?v=1793220542"},{"product_id":"firestone-ride-rite-air-spring-kit-2005-2007-ford-f-250-f-350-4wd-2400","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2005-2007 Ford F-250\/F-350 Super Duty 4WD","description":"\u003cp\u003eFirestone sized this Ride-Rite kit specifically for the 2005-2007 Ford F-250\/F-350 Super Duty 4WD. The two air helper springs install above the rear axle, under the frame, and work alongside the factory rear springs instead of replacing them. Pump them up before the trailer goes on the ball or the bed fills up, and the Ford F-250\/F-350 Super Duty stays flat instead of nose-up, with steady steering, normal braking and headlights aimed where they belong. Once the load comes off, let air out and you are back to a near-factory ride. That matters on a Ford F-250\/F-350 Super Duty that spends its weekends hooked to a stock trailer or a toy hauler.\u003c\/p\u003e\u003cp\u003eThe springs fill independently, one valve per side, so a lopsided load like a transfer tank or a side-heavy tool box can be leveled out with a few extra PSI where it is needed. Firestone rates the kit for as much as 5,000 lbs of leveling support. It does not raise your GVWR, so never load past it.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrings the back of the truck back up to level under load\u003c\/li\u003e\n\u003cli\u003eRun a minimum of 5 PSI at all times to protect the springs\u003c\/li\u003e\n\u003cli\u003e5,000 lb leveling capacity per kit, within your GVWR\u003c\/li\u003e\n\u003cli\u003eRun different pressures per side for lopsided cargo\u003c\/li\u003e\n\u003cli\u003eBolts up through existing factory holes, no drilling\u003c\/li\u003e\n\u003cli\u003ePuts weight back on the front tires for steering and braking\u003c\/li\u003e\n\u003cli\u003eAir pressure sets the support level for whatever you are carrying\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2400 (W217602400)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 31.9 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555112021\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2005-2007 Ford F-250\/F-350 Super Duty 4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eThe box holds both air springs, the upper and lower brackets, hardware, air line and fill valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eNothing to drill: the kit mounts using holes already in the chassis. With hand tools, most installs run about 1-2 hours. After install, check all fittings for leaks, make sure the lines stay away from exhaust heat and suspension travel, and keep 5 PSI minimum in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043327602920,"sku":"2400","price":591.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/24fdee04dc414423fdc8a55dc127f968_edf37274-cb34-4e78-92a9-22b9da53cf92.jpg?v=1793220542"},{"product_id":"firestone-ride-rite-air-spring-kit-2001-2010-silverado-sierra-2500hd-2250","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2001-2010 Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD 2WD\/4WD","description":"\u003cp\u003eIf your Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD sags every time the bed or the hitch gets weight on it, this Ride-Rite kit is the fix: Firestone air helper springs sit between the frame and rear axle of the 2001-2010 Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD 2WD\/4WD and carry part of the load. Put air in ahead of a towing or hauling job and the rear end holds its height, which keeps weight on the front axle for steering and braking and keeps your lights out of oncoming drivers' eyes. With no load, lower the pressure and the ride quality stays close to how the truck left the factory. Hot shot runs, hay hauls and RV trips are exactly the jobs a Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD gets bought for.\u003c\/p\u003e\u003cp\u003eTwo separate inflation valves let you run the left and right springs at different pressures, handy when a slide-in camper, fuel transfer tank or tool box puts more weight on one side. Rated load leveling for this kit is up to 5,000 lbs per pair, and the truck's GVWR still applies.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolds the Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD level with a trailer hooked up or the bed full\u003c\/li\u003e\n\u003cli\u003eTwo fill valves so each side can be leveled on its own\u003c\/li\u003e\n\u003cli\u003eNever let the springs drop below 5 PSI\u003c\/li\u003e\n\u003cli\u003eRated for 5,000 lbs of leveling support; stay under GVWR\u003c\/li\u003e\n\u003cli\u003eUses factory mounting points, so the frame stays undrilled\u003c\/li\u003e\n\u003cli\u003ePuts weight back on the front tires for steering and braking\u003c\/li\u003e\n\u003cli\u003eAir pressure sets the support level for whatever you are carrying\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2250 (W217602250)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 21.7 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555100691\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2001-2010 Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eThe box holds both air springs, the upper and lower brackets, hardware, air line and fill valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eNothing to drill: the kit mounts using holes already in the chassis. With hand tools, most installs run about 1-2 hours. Keep the air line clear of the exhaust and anything that moves, leak-check every fitting when you finish, and never run below 5 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043328225512,"sku":"2250","price":569.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/ee4be08fee311240ab58ca36662c5ca3L.jpg?v=1793220543"},{"product_id":"firestone-ride-rite-air-spring-kit-1988-1998-chevy-gmc-c-k-1500-2025","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 1988-1998 Chevrolet\/GMC C\/K 1500, 2500 and 3500 pickup 2WD\/4WD","description":"\u003cp\u003eFirestone sized this Ride-Rite kit specifically for the 1988-1998 Chevrolet\/GMC C\/K 1500, 2500 and 3500 pickup 2WD\/4WD. The two air helper springs install above the rear axle, under the frame, and work alongside the factory rear springs instead of replacing them. Pump them up before the trailer goes on the ball or the bed fills up, and the Chevrolet\/GMC C\/K 1500 stays flat instead of nose-up, with steady steering, normal braking and headlights aimed where they belong. Bleed them back down when the bed is empty and the ride goes back to about where the factory had it. Heavy-duty owners feel the difference most with a loaded flatbed or a big fifth-wheel behind the Chevrolet\/GMC C\/K 1500.\u003c\/p\u003e\u003cp\u003eThe springs fill independently, one valve per side, so a lopsided load like a transfer tank or a side-heavy tool box can be leveled out with a few extra PSI where it is needed. The pair is rated for up to 5,000 lbs of load-leveling capacity; stay within your truck's GVWR.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKeeps the rear from squatting under tongue weight or a loaded bed\u003c\/li\u003e\n\u003cli\u003eOne valve per spring to correct side-to-side lean\u003c\/li\u003e\n\u003cli\u003eA little drilling is needed to mount the brackets\u003c\/li\u003e\n\u003cli\u003eNever let the springs drop below 5 PSI\u003c\/li\u003e\n\u003cli\u003eSteadier handling, better steering feel and more confident stops when loaded\u003c\/li\u003e\n\u003cli\u003eRated for 5,000 lbs of leveling support; stay under GVWR\u003c\/li\u003e\n\u003cli\u003eDial in more or less support with a few PSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2025 (W217602025)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 34.6 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555014424\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1988-1998 Chevrolet\/GMC C\/K 1500, 2500 and 3500 pickup 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eThe box holds both air springs, the upper and lower brackets, hardware, air line and fill valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eBolt-on with hand tools, with some drilling required for bracket mounting. Typical install time runs 2-3 hours. Route air lines well away from heat and moving parts, spray-check the fittings for leaks, and hold at least 5 PSI in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043328291048,"sku":"2025","price":519.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/24fdee04dc414423fdc8a55dc127f968_59b902d3-6851-444a-bb90-751d64048344.jpg?v=1793220544"},{"product_id":"firestone-red-label-air-spring-kit-2014-2025-ram-2500-2706","title":"Firestone Ride-Rite RED Label Extreme Duty Rear Air Spring Kit - 2014-2025 Ram 2500 2WD\/4WD","description":"\u003cp\u003eBuilt for the 2014-2025 Ram 2500 2WD\/4WD, this Firestone RED Label kit puts a pair of extreme-duty air springs over the rear axle so the stock rear springs get real help under big loads. Inflate before you load and the rear stops squatting, so the front end keeps the weight it needs to steer and stop, and your low beams stay on the pavement instead of the treetops. Bleed them back down when the bed is empty and the ride goes back to about where the factory had it. Diesel Ram 2500 owners who tow heavy see it first in the mirrors: a level rig and a calmer trailer.\u003c\/p\u003e\u003cp\u003eFirestone builds RED Label for working trucks, using heavier-wall rubber and coated steel brackets that stand up to hot shot hauling, service-body duty, campers and big goosenecks. The springs take up to 150 PSI and level up to 7,500 lbs; GVWR still governs how much you can carry.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStops rear sag when towing or hauling\u003c\/li\u003e\n\u003cli\u003e7,500 lb leveling capacity per kit, within your GVWR\u003c\/li\u003e\n\u003cli\u003eOperating range 5-150 PSI\u003c\/li\u003e\n\u003cli\u003eNo drilling: the brackets use holes already in the frame\u003c\/li\u003e\n\u003cli\u003eTwo fill valves so each side can be leveled on its own\u003c\/li\u003e\n\u003cli\u003eLoaded-truck steering and braking feel closer to normal\u003c\/li\u003e\n\u003cli\u003eDial in more or less support with a few PSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2706 (W217602706)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 31 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555159682\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2014-2025 Ram 2500 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eUpper and lower brackets, a pair of air helper springs, mounting hardware, air line and the inflation valves are all included.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eThe brackets bolt to existing factory holes, so nothing gets drilled. With hand tools, most installs run about 1-2 hours. After install, check all fittings for leaks, make sure the lines stay away from exhaust heat and suspension travel, and keep 5 PSI minimum in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043328389352,"sku":"2706","price":800.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/b1a2a8a9f84d59b90bfb607f476de612L.jpg?v=1793220544"},{"product_id":"firestone-red-label-air-spring-kit-2003-2013-dodge-ram-2500-2701","title":"Firestone Ride-Rite RED Label Extreme Duty Rear Air Spring Kit - 2003-2013 Dodge\/Ram 2500 2WD\/4WD","description":"\u003cp\u003eBuilt for the 2003-2013 Dodge\/Ram 2500 2WD\/4WD, this Firestone RED Label kit puts a pair of extreme-duty air springs over the rear axle so the stock rear springs get real help under big loads. Inflate before you load and the rear stops squatting, so the front end keeps the weight it needs to steer and stop, and your low beams stay on the pavement instead of the treetops. Once the load comes off, let air out and you are back to a near-factory ride. That matters on a Dodge\/Ram 2500 that spends its weekends hooked to a stock trailer or a toy hauler.\u003c\/p\u003e\u003cp\u003eThis is Firestone's commercial line: heavier rubber, coated brackets and a build meant for trucks that pull fifth-wheels and goosenecks or carry service bodies and campers every week. Load leveling is rated at up to 7,500 lbs, the springs handle up to 150 PSI, and the truck's GVWR remains the limit.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrings the back of the truck back up to level under load\u003c\/li\u003e\n\u003cli\u003eSteadier handling, better steering feel and more confident stops when loaded\u003c\/li\u003e\n\u003cli\u003eUp to 7,500 lbs of load-leveling capacity (GVWR still applies)\u003c\/li\u003e\n\u003cli\u003eRated to 150 PSI; keep at least 5 PSI in them\u003c\/li\u003e\n\u003cli\u003eTune it for the job: low pressure empty, more pressure loaded\u003c\/li\u003e\n\u003cli\u003eUses factory mounting points, so the frame stays undrilled\u003c\/li\u003e\n\u003cli\u003eIndependent left and right fill valves for uneven loads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2701 (W217602701)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 27.7 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555159668\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2003-2013 Dodge\/Ram 2500 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eUpper and lower brackets, a pair of air helper springs, mounting hardware, air line and the inflation valves are all included.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eThe brackets bolt to existing factory holes, so nothing gets drilled. Budget roughly 1-2 hours with basic hand tools. Route air lines well away from heat and moving parts, spray-check the fittings for leaks, and hold at least 5 PSI in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043328454888,"sku":"2701","price":800.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/0ff0ca52716ff34ab64a427263d16661L.jpg?v=1793220546"},{"product_id":"firestone-red-label-air-spring-kit-2001-2010-silverado-sierra-2500hd-2700","title":"Firestone Ride-Rite RED Label Extreme Duty Rear Air Spring Kit - 2001-2010 Chevrolet Silverado \/ GMC Sierra 2500HD 2WD\/4WD","description":"\u003cp\u003eThis RED Label kit is the heavy-hauler option for the 2001-2010 Chevrolet Silverado \/ GMC Sierra 2500HD 2WD\/4WD: two Firestone air springs go in between the frame and rear axle to back up the factory rear springs. Put air in ahead of a towing or hauling job and the rear end holds its height, which keeps weight on the front axle for steering and braking and keeps your lights out of oncoming drivers' eyes. Running empty? Drop the pressure and the Chevrolet Silverado \/ GMC Sierra 2500HD rides close to stock. For a Chevrolet Silverado \/ GMC Sierra 2500HD that pulls a gooseneck or carries a camper, that extra support shows up on every trip.\u003c\/p\u003e\u003cp\u003eRED Label is Firestone's commercial-grade series, with thicker rubber and coated brackets made for hot shot work, service bodies, slide-in campers and heavy fifth-wheel or gooseneck towing. The springs take up to 150 PSI and level up to 7,500 lbs; GVWR still governs how much you can carry.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrings the back of the truck back up to level under load\u003c\/li\u003e\n\u003cli\u003eLess sway and better control with weight in the bed or on the hitch\u003c\/li\u003e\n\u003cli\u003eRated to 150 PSI; keep at least 5 PSI in them\u003c\/li\u003e\n\u003cli\u003eDial in more or less support with a few PSI\u003c\/li\u003e\n\u003cli\u003eRated for 7,500 lbs of leveling support; stay under GVWR\u003c\/li\u003e\n\u003cli\u003eNo drilling: the brackets use holes already in the frame\u003c\/li\u003e\n\u003cli\u003eRun different pressures per side for lopsided cargo\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2700 (W217602700)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 22.7 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555159675\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2001-2010 Chevrolet Silverado \/ GMC Sierra 2500HD 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eThe box holds both air springs, the upper and lower brackets, hardware, air line and fill valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eThe brackets bolt to existing factory holes, so nothing gets drilled. Typical time in the driveway is 1-2 hours with hand tools. Route air lines well away from heat and moving parts, spray-check the fittings for leaks, and hold at least 5 PSI in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043328553192,"sku":"2700","price":800.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/b1a2a8a9f84d59b90bfb607f476de612L_f0fb71b6-0475-46ef-9cc3-16865c90157f.jpg?v=1793220546"},{"product_id":"firestone-sport-rite-air-spring-kit-1995-2004-toyota-tacoma-4wd-2304","title":"Firestone Sport-Rite Rear Air Helper Spring Kit - 1995-2004 Toyota Tacoma 4WD and 2WD PreRunner","description":"\u003cp\u003eFirestone Sport-Rite air helper springs mount between the frame and rear axle of your 1995-2004 Toyota Tacoma 4WD and 2WD PreRunner and give the factory leaf springs adjustable help. Add pressure before hitching up or loading the bed and the Toyota Tacoma and PreRunner sits level, so the front tires keep their grip, the headlights stay pointed at the road and braking feels normal again. With no load, lower the pressure and the ride quality stays close to how the truck left the factory. Mid-size trucks like the Toyota Tacoma and PreRunner run out of rear spring quickly with a trailer or a loaded rack.\u003c\/p\u003e\u003cp\u003eSport-Rite uses a tapered air spring that improves ride quality empty and adds up to 3,000 lbs of load support per pair when you need it (never exceed your truck's GVWR). Separate inflation valves for each side let you level an off-center load.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKeeps the rear from squatting under tongue weight or a loaded bed\u003c\/li\u003e\n\u003cli\u003eUp to 3,000 lbs of load-leveling capacity (GVWR still applies)\u003c\/li\u003e\n\u003cli\u003eRun a minimum of 5 PSI at all times to protect the springs\u003c\/li\u003e\n\u003cli\u003eTune it for the job: low pressure empty, more pressure loaded\u003c\/li\u003e\n\u003cli\u003eBracket install calls for some drilling\u003c\/li\u003e\n\u003cli\u003ePuts weight back on the front tires for steering and braking\u003c\/li\u003e\n\u003cli\u003eOne valve per spring to correct side-to-side lean\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2304 (W217602304)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 16.8 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555105030\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1995-2004 Toyota Tacoma 4WD and 2WD PreRunner\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eThe box holds both air springs, the upper and lower brackets, hardware, air line and fill valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eMostly a hand-tool bolt-on, though the brackets need a few holes drilled. Typical install time runs 2-3 hours. Route air lines well away from heat and moving parts, spray-check the fittings for leaks, and hold at least 5 PSI in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043328651496,"sku":"2304","price":594.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/3af051a7d79fd494fc7337ffe01479b7.jpg?v=1793220547"},{"product_id":"firestone-ride-rite-air-spring-kit-1999-2004-ford-f-250-f-350-2550","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 1999-2004 Ford F-250\/F-350 Super Duty","description":"\u003cp\u003eThis Ride-Rite kit is matched to the 1999-2004 Ford F-250\/F-350 Super Duty: a pair of Firestone air helper springs bolts in between the frame and rear axle and backs up the factory rear springs with support you set with air. Add pressure before hitching up or loading the bed and the Ford F-250\/F-350 Super Duty sits level, so the front tires keep their grip, the headlights stay pointed at the road and braking feels normal again. Bleed them back down when the bed is empty and the ride goes back to about where the factory had it. On a heavy-duty Ford F-250\/F-350 Super Duty, that usually means a gooseneck, a fifth-wheel or a bed full of equipment.\u003c\/p\u003e\u003cp\u003eTwo separate inflation valves let you run the left and right springs at different pressures, handy when a slide-in camper, fuel transfer tank or tool box puts more weight on one side. Rated load leveling for this kit is up to 5,000 lbs per pair, and the truck's GVWR still applies.\u003c\/p\u003e\u003cp\u003eFirestone also lists 2008-2010 F-250\/F-350 trucks for this kit, and now points to kit 2597 as its replacement. Call us and we will confirm the right one for your truck.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStops rear sag when towing or hauling\u003c\/li\u003e\n\u003cli\u003eDial in more or less support with a few PSI\u003c\/li\u003e\n\u003cli\u003eBolts up through existing factory holes, no drilling\u003c\/li\u003e\n\u003cli\u003eRated for 5,000 lbs of leveling support; stay under GVWR\u003c\/li\u003e\n\u003cli\u003eIndependent left and right fill valves for uneven loads\u003c\/li\u003e\n\u003cli\u003eRun a minimum of 5 PSI at all times to protect the springs\u003c\/li\u003e\n\u003cli\u003eSteadier handling, better steering feel and more confident stops when loaded\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2550 (W217602550)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 43.3 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555143490\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1999-2004 Ford F-250\/F-350 Super Duty\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eUpper and lower brackets, a pair of air helper springs, mounting hardware, air line and the inflation valves are all included.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eIt goes in using factory mounting holes, with no drilling. Typical time in the driveway is 1-2 hours with hand tools. After install, check all fittings for leaks, make sure the lines stay away from exhaust heat and suspension travel, and keep 5 PSI minimum in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043331436776,"sku":"2550","price":660.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/33af9c710fd8c113bc0406c885053853.jpg?v=1793220552"},{"product_id":"firestone-sport-rite-air-spring-kit-1999-2005-chevy-silverado-1500-gmc-sierra-1500-2320","title":"Firestone Sport-Rite Rear Air Helper Spring Kit - 1999-2005 Chevrolet Silverado 1500 \/ GMC Sierra 1500 (not HD) and 1997-2004 Ford F-150","description":"\u003cp\u003eFirestone Sport-Rite air helper springs mount between the frame and rear axle of your 1999-2005 Chevrolet Silverado 1500 \/ GMC Sierra 1500 (not HD) and 1997-2004 Ford F-150 and give the factory leaf springs adjustable help. Put air in ahead of a towing or hauling job and the rear end holds its height, which keeps weight on the front axle for steering and braking and keeps your lights out of oncoming drivers' eyes. Once the load comes off, let air out and you are back to a near-factory ride. Hot shot runs, hay hauls and RV trips are exactly the jobs a Chevrolet Silverado 1500 \/ GMC Sierra 1500 and Ford F-150 gets bought for.\u003c\/p\u003e\u003cp\u003eSport-Rite uses a tapered air spring that improves ride quality empty and adds up to 3,000 lbs of load support per pair when you need it (never exceed your truck's GVWR). Separate inflation valves for each side let you level an off-center load.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolds the Chevrolet Silverado 1500 \/ GMC Sierra 1500 and Ford F-150 level with a trailer hooked up or the bed full\u003c\/li\u003e\n\u003cli\u003e3,000 lb leveling capacity per kit, within your GVWR\u003c\/li\u003e\n\u003cli\u003eRun different pressures per side for lopsided cargo\u003c\/li\u003e\n\u003cli\u003eExpect to drill a few holes for the brackets\u003c\/li\u003e\n\u003cli\u003e5 PSI minimum pressure, loaded or empty\u003c\/li\u003e\n\u003cli\u003eSteadier handling, better steering feel and more confident stops when loaded\u003c\/li\u003e\n\u003cli\u003eSupport adjusts with air pressure, from an empty bed to a full payload\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2320 (W217602320)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 22.1 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555106587\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1999-2005 Chevrolet Silverado 1500 \/ GMC Sierra 1500 (not HD) and 1997-2004 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eKit includes upper and lower brackets, two air springs, mounting hardware, air line and inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eBolt-on with hand tools, with some drilling required for bracket mounting. Most installs wrap up in 2-3 hours. Route air lines well away from heat and moving parts, spray-check the fittings for leaks, and hold at least 5 PSI in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043331502312,"sku":"2320","price":594.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/23a1cfbf7f550a7580895851d2435af9.jpg?v=1793220553"},{"product_id":"firestone-ride-rite-air-spring-kit-2014-2025-ram-2500-2598","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2014-2025 Ram 2500 2WD\/4WD","description":"\u003cp\u003eThis Ride-Rite kit is matched to the 2014-2025 Ram 2500 2WD\/4WD: a pair of Firestone air helper springs bolts in between the frame and rear axle and backs up the factory rear springs with support you set with air. Put air in ahead of a towing or hauling job and the rear end holds its height, which keeps weight on the front axle for steering and braking and keeps your lights out of oncoming drivers' eyes. Running empty? Drop the pressure and the Ram 2500 rides close to stock. Heavy-duty owners feel the difference most with a loaded flatbed or a big fifth-wheel behind the Ram 2500.\u003c\/p\u003e\u003cp\u003eThe springs fill independently, one valve per side, so a lopsided load like a transfer tank or a side-heavy tool box can be leveled out with a few extra PSI where it is needed. The pair is rated for up to 5,000 lbs of load-leveling capacity; stay within your truck's GVWR.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKeeps the rear from squatting under tongue weight or a loaded bed\u003c\/li\u003e\n\u003cli\u003ePuts weight back on the front tires for steering and braking\u003c\/li\u003e\n\u003cli\u003eNever let the springs drop below 5 PSI\u003c\/li\u003e\n\u003cli\u003eUp to 5,000 lbs of load-leveling capacity (GVWR still applies)\u003c\/li\u003e\n\u003cli\u003eIndependent left and right fill valves for uneven loads\u003c\/li\u003e\n\u003cli\u003eAir pressure sets the support level for whatever you are carrying\u003c\/li\u003e\n\u003cli\u003eNo drilling: the brackets use holes already in the frame\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2598 (W217602598)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 31.4 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555160862\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2014-2025 Ram 2500 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eA pair of air helper springs with supports, mounting hardware, air line and inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eIt goes in using factory mounting holes, with no drilling. With hand tools, most installs run about 1-2 hours. After install, check all fittings for leaks, make sure the lines stay away from exhaust heat and suspension travel, and keep 5 PSI minimum in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043331600616,"sku":"2598","price":594.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/24fdee04dc414423fdc8a55dc127f968_7c06203b-0eda-49ed-83f7-6af9ed63c8d4.jpg?v=1793220555"},{"product_id":"firestone-ride-rite-air-spring-kit-2011-2025-silverado-sierra-2500hd-2613","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2011-2025 Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD 2WD\/4WD","description":"\u003cp\u003eThis Ride-Rite kit is matched to the 2011-2025 Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD 2WD\/4WD: a pair of Firestone air helper springs bolts in between the frame and rear axle and backs up the factory rear springs with support you set with air. Add pressure before hitching up or loading the bed and the Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD sits level, so the front tires keep their grip, the headlights stay pointed at the road and braking feels normal again. Running empty? Drop the pressure and the Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD rides close to stock. That matters on a Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD that spends its weekends hooked to a stock trailer or a toy hauler.\u003c\/p\u003e\u003cp\u003eThe springs fill independently, one valve per side, so a lopsided load like a transfer tank or a side-heavy tool box can be leveled out with a few extra PSI where it is needed. Rated load leveling for this kit is up to 5,000 lbs per pair, and the truck's GVWR still applies.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolds the Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD level with a trailer hooked up or the bed full\u003c\/li\u003e\n\u003cli\u003eLess sway and better control with weight in the bed or on the hitch\u003c\/li\u003e\n\u003cli\u003eRun different pressures per side for lopsided cargo\u003c\/li\u003e\n\u003cli\u003eBolts up through existing factory holes, no drilling\u003c\/li\u003e\n\u003cli\u003e5,000 lb leveling capacity per kit, within your GVWR\u003c\/li\u003e\n\u003cli\u003eTune it for the job: low pressure empty, more pressure loaded\u003c\/li\u003e\n\u003cli\u003eNever let the springs drop below 5 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2613 (W217602613)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 30.1 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555164747\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2025 Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eThe box holds both air springs, the upper and lower brackets, hardware, air line and fill valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eIt goes in using factory mounting holes, with no drilling. Budget roughly 1-2 hours with basic hand tools. Keep the air line clear of the exhaust and anything that moves, leak-check every fitting when you finish, and never run below 5 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043331633384,"sku":"2613","price":702.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/15407661514984.jpg?v=1793820912"},{"product_id":"firestone-ride-rite-air-spring-kit-2019-2025-chevy-silverado-1500-gmc-sierra-1500-2609","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2019-2025 Chevrolet Silverado 1500 \/ GMC Sierra 1500 2WD\/4WD, including 2022 Silverado LTD and Sierra Limited","description":"\u003cp\u003eBuilt for the 2019-2025 Chevrolet Silverado 1500 \/ GMC Sierra 1500 2WD\/4WD, including 2022 Silverado LTD and Sierra Limited, this Firestone Ride-Rite kit adds two air helper springs between the frame rails and the rear axle, so the stock rear springs get help only when you ask for it. Inflate before you load and the rear stops squatting, so the front end keeps the weight it needs to steer and stop, and your low beams stay on the pavement instead of the treetops. Once the load comes off, let air out and you are back to a near-factory ride. Light-duty trucks like the Chevrolet Silverado 1500 \/ GMC Sierra 1500 squat early under tongue weight, which is exactly what this addresses.\u003c\/p\u003e\u003cp\u003eTwo separate inflation valves let you run the left and right springs at different pressures, handy when a slide-in camper, fuel transfer tank or tool box puts more weight on one side. The pair is rated for up to 5,000 lbs of load-leveling capacity; stay within your truck's GVWR.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrings the back of the truck back up to level under load\u003c\/li\u003e\n\u003cli\u003eRun a minimum of 5 PSI at all times to protect the springs\u003c\/li\u003e\n\u003cli\u003eLess sway and better control with weight in the bed or on the hitch\u003c\/li\u003e\n\u003cli\u003eOne valve per spring to correct side-to-side lean\u003c\/li\u003e\n\u003cli\u003eAir pressure sets the support level for whatever you are carrying\u003c\/li\u003e\n\u003cli\u003eUp to 5,000 lbs of load-leveling capacity (GVWR still applies)\u003c\/li\u003e\n\u003cli\u003eUses factory mounting points, so the frame stays undrilled\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2609 (W217602609)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 22.6 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555164006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2019-2025 Chevrolet Silverado 1500 \/ GMC Sierra 1500 2WD\/4WD, including 2022 Silverado LTD and Sierra Limited\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eBoth helper springs, the supports, hardware, air line and fill valves come in the kit.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eIt goes in using factory mounting holes, with no drilling. With hand tools, most installs run about 1-2 hours. Keep the air line clear of the exhaust and anything that moves, leak-check every fitting when you finish, and never run below 5 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043331731688,"sku":"2609","price":594.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/24fdee04dc414423fdc8a55dc127f968_e665b750-0dbf-4373-a1b7-682db6d01c3f.jpg?v=1793220556"},{"product_id":"firestone-ride-rite-air-spring-kit-2013-2025-ram-3500-4wd-2615","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2013-2025 Ram 3500 4WD","description":"\u003cp\u003eBuilt for the 2013-2025 Ram 3500 4WD, this Firestone Ride-Rite kit adds two air helper springs between the frame rails and the rear axle, so the stock rear springs get help only when you ask for it. Pump them up before the trailer goes on the ball or the bed fills up, and the Ram 3500 stays flat instead of nose-up, with steady steering, normal braking and headlights aimed where they belong. With no load, lower the pressure and the ride quality stays close to how the truck left the factory. Diesel Ram 3500 owners who tow heavy see it first in the mirrors: a level rig and a calmer trailer.\u003c\/p\u003e\u003cp\u003eBecause each spring has its own fill valve, you can correct body lean from off-center cargo, such as a camper or a tank mounted to one side of the bed. Rated load leveling for this kit is up to 5,000 lbs per pair, and the truck's GVWR still applies.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKeeps the rear from squatting under tongue weight or a loaded bed\u003c\/li\u003e\n\u003cli\u003eLoaded-truck steering and braking feel closer to normal\u003c\/li\u003e\n\u003cli\u003eBolts up through existing factory holes, no drilling\u003c\/li\u003e\n\u003cli\u003eTwo fill valves so each side can be leveled on its own\u003c\/li\u003e\n\u003cli\u003eAir pressure sets the support level for whatever you are carrying\u003c\/li\u003e\n\u003cli\u003e5,000 lb leveling capacity per kit, within your GVWR\u003c\/li\u003e\n\u003cli\u003eNever let the springs drop below 5 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2615 (W217602615)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 24.3 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555165294\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2013-2025 Ram 3500 4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eA pair of air helper springs with supports, mounting hardware, air line and inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eThe brackets bolt to existing factory holes, so nothing gets drilled. With hand tools, most installs run about 1-2 hours. Route air lines well away from heat and moving parts, spray-check the fittings for leaks, and hold at least 5 PSI in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043331764456,"sku":"2615","price":594.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/15407661646056.jpg?v=1793820939"},{"product_id":"firestone-red-label-air-spring-kit-2020-2025-silverado-sierra-2500hd-2709","title":"Firestone Ride-Rite RED Label Extreme Duty Rear Air Spring Kit - 2020-2025 Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD 2WD\/4WD","description":"\u003cp\u003eWhen a Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD spends its life loaded, RED Label is the Firestone kit to run. The air springs bolt in between the frame and rear axle of the 2020-2025 Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD 2WD\/4WD and add support you control with air pressure. Put air in ahead of a towing or hauling job and the rear end holds its height, which keeps weight on the front axle for steering and braking and keeps your lights out of oncoming drivers' eyes. Once the load comes off, let air out and you are back to a near-factory ride. Diesel Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD owners who tow heavy see it first in the mirrors: a level rig and a calmer trailer.\u003c\/p\u003e\u003cp\u003eRED Label is Firestone's commercial-grade series, with thicker rubber and coated brackets made for hot shot work, service bodies, slide-in campers and heavy fifth-wheel or gooseneck towing. Load leveling is rated at up to 7,500 lbs, the springs handle up to 150 PSI, and the truck's GVWR remains the limit.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrings the back of the truck back up to level under load\u003c\/li\u003e\n\u003cli\u003eOperating range 5-150 PSI\u003c\/li\u003e\n\u003cli\u003eRated for 7,500 lbs of leveling support; stay under GVWR\u003c\/li\u003e\n\u003cli\u003eBrackets for the Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD are in the box and mount the springs between frame and axle\u003c\/li\u003e\n\u003cli\u003eLoaded-truck steering and braking feel closer to normal\u003c\/li\u003e\n\u003cli\u003eTune it for the job: low pressure empty, more pressure loaded\u003c\/li\u003e\n\u003cli\u003eOne valve per spring to correct side-to-side lean\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2709 (W217602709)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 29.5 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555165331\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2020-2025 Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eYou get both air springs, the Chevrolet Silverado \/ GMC Sierra 2500HD and 3500HD brackets, all mounting hardware, air line and the inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003ePlan on a bolt-on job with basic hand tools; the brackets are included. Typical install time is around 1-2 hours. After install, check all fittings for leaks, make sure the lines stay away from exhaust heat and suspension travel, and keep 5 PSI minimum in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043331829992,"sku":"2709","price":800.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/be052c497c4ec24925d2dc4028f9980bL.jpg?v=1793220556"},{"product_id":"firestone-red-label-air-spring-kit-2014-2025-ram-3500-4wd-2710","title":"Firestone Ride-Rite RED Label Extreme Duty Rear Air Spring Kit - 2014-2025 Ram 3500 4WD","description":"\u003cp\u003eThis RED Label kit is the heavy-hauler option for the 2014-2025 Ram 3500 4WD: two Firestone air springs go in between the frame and rear axle to back up the factory rear springs. Pump them up before the trailer goes on the ball or the bed fills up, and the Ram 3500 stays flat instead of nose-up, with steady steering, normal braking and headlights aimed where they belong. With no load, lower the pressure and the ride quality stays close to how the truck left the factory. Heavy-duty owners feel the difference most with a loaded flatbed or a big fifth-wheel behind the Ram 3500.\u003c\/p\u003e\u003cp\u003eRED Label is Firestone's commercial-grade series, with thicker rubber and coated brackets made for hot shot work, service bodies, slide-in campers and heavy fifth-wheel or gooseneck towing. Expect up to 7,500 lbs of leveling capacity with springs rated to 150 PSI. Never go past the GVWR on the door sticker.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrings the back of the truck back up to level under load\u003c\/li\u003e\n\u003cli\u003eSpring pressure range: 5 PSI minimum to 150 PSI maximum\u003c\/li\u003e\n\u003cli\u003eSteadier handling, better steering feel and more confident stops when loaded\u003c\/li\u003e\n\u003cli\u003eUses factory mounting points, so the frame stays undrilled\u003c\/li\u003e\n\u003cli\u003eDial in more or less support with a few PSI\u003c\/li\u003e\n\u003cli\u003eIndependent left and right fill valves for uneven loads\u003c\/li\u003e\n\u003cli\u003e7,500 lb leveling capacity per kit, within your GVWR\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2710 (W217602710)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 23.9 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555165317\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2014-2025 Ram 3500 4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eUpper and lower brackets, a pair of air helper springs, mounting hardware, air line and the inflation valves are all included.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eNothing to drill: the kit mounts using holes already in the chassis. Budget roughly 1-2 hours with basic hand tools. Keep the air line clear of the exhaust and anything that moves, leak-check every fitting when you finish, and never run below 5 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043331961064,"sku":"2710","price":800.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/15407661842664.jpg?v=1793820939"},{"product_id":"firestone-red-label-air-spring-kit-2020-chevy-silverado-4500hd-5500hd-cab-chassis-2711","title":"Firestone Ride-Rite RED Label Extreme Duty Rear Air Spring Kit - 2020 Chevrolet Silverado 4500HD\/5500HD Cab \u0026 Chassis and 2020 International CV Series","description":"\u003cp\u003eWhen a Chevrolet Silverado 4500HD\/5500HD Cab \u0026amp; Chassis and International CV Series spends its life loaded, RED Label is the Firestone kit to run. The air springs bolt in between the frame and rear axle of the 2020 Chevrolet Silverado 4500HD\/5500HD Cab \u0026amp; Chassis and 2020 International CV Series and add support you control with air pressure. Add pressure before hitching up or loading the bed and the Chevrolet Silverado 4500HD\/5500HD Cab \u0026amp; Chassis and International CV Series sits level, so the front tires keep their grip, the headlights stay pointed at the road and braking feels normal again. Once the load comes off, let air out and you are back to a near-factory ride. Cab and chassis trucks like the Chevrolet Silverado 4500HD\/5500HD Cab \u0026amp; Chassis and International CV Series often wear service bodies or flatbeds that load unevenly.\u003c\/p\u003e\u003cp\u003eFirestone builds RED Label for working trucks, using heavier-wall rubber and coated steel brackets that stand up to hot shot hauling, service-body duty, campers and big goosenecks. Expect up to 7,500 lbs of leveling capacity with springs rated to 150 PSI. Never go past the GVWR on the door sticker.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrings the back of the truck back up to level under load\u003c\/li\u003e\n\u003cli\u003eTwo fill valves so each side can be leveled on its own\u003c\/li\u003e\n\u003cli\u003eBrackets for the Chevrolet Silverado 4500HD\/5500HD Cab \u0026amp; Chassis and International CV Series are in the box and mount the springs between frame and axle\u003c\/li\u003e\n\u003cli\u003eLess sway and better control with weight in the bed or on the hitch\u003c\/li\u003e\n\u003cli\u003eRated to 150 PSI; keep at least 5 PSI in them\u003c\/li\u003e\n\u003cli\u003e7,500 lb leveling capacity per kit, within your GVWR\u003c\/li\u003e\n\u003cli\u003eSupport adjusts with air pressure, from an empty bed to a full payload\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2711 (W217602711)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 64.7 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555166000\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2020 Chevrolet Silverado 4500HD\/5500HD Cab \u0026amp; Chassis and 2020 International CV Series\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eYou get both air springs, the Chevrolet Silverado 4500HD\/5500HD Cab \u0026amp; Chassis and International CV Series brackets, all mounting hardware, air line and the inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eHand tools and the supplied brackets are all the install needs. Most shops and DIYers finish in about 1-2 hours. Route air lines well away from heat and moving parts, spray-check the fittings for leaks, and hold at least 5 PSI in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043332059368,"sku":"2711","price":800.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/b1a2a8a9f84d59b90bfb607f476de612L_a5431e54-43d6-436d-929c-96f0ae126c2a.jpg?v=1793220558"},{"product_id":"firestone-red-label-air-spring-kit-2012-2025-silverado-sierra-3500hd-cab-chassis-2715","title":"Firestone Ride-Rite RED Label Extreme Duty Rear Air Spring Kit - 2012-2025 Chevrolet Silverado \/ GMC Sierra 3500HD Cab \u0026 Chassis","description":"\u003cp\u003eWhen a Chevrolet Silverado \/ GMC Sierra 3500HD Cab \u0026amp; Chassis spends its life loaded, RED Label is the Firestone kit to run. The air springs bolt in between the frame and rear axle of the 2012-2025 Chevrolet Silverado \/ GMC Sierra 3500HD Cab \u0026amp; Chassis and add support you control with air pressure. Inflate before you load and the rear stops squatting, so the front end keeps the weight it needs to steer and stop, and your low beams stay on the pavement instead of the treetops. Bleed them back down when the bed is empty and the ride goes back to about where the factory had it. Cab and chassis trucks like the Chevrolet Silverado \/ GMC Sierra 3500HD Cab \u0026amp; Chassis often wear service bodies or flatbeds that load unevenly.\u003c\/p\u003e\u003cp\u003eThis is Firestone's commercial line: heavier rubber, coated brackets and a build meant for trucks that pull fifth-wheels and goosenecks or carry service bodies and campers every week. Load leveling is rated at up to 7,500 lbs, the springs handle up to 150 PSI, and the truck's GVWR remains the limit.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKeeps the rear from squatting under tongue weight or a loaded bed\u003c\/li\u003e\n\u003cli\u003eSpring pressure range: 5 PSI minimum to 150 PSI maximum\u003c\/li\u003e\n\u003cli\u003eRun different pressures per side for lopsided cargo\u003c\/li\u003e\n\u003cli\u003eFrame-to-axle mounting with vehicle-specific brackets\u003c\/li\u003e\n\u003cli\u003eAir pressure sets the support level for whatever you are carrying\u003c\/li\u003e\n\u003cli\u003eLess sway and better control with weight in the bed or on the hitch\u003c\/li\u003e\n\u003cli\u003eRated for 7,500 lbs of leveling support; stay under GVWR\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2715 (W217602715)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 32.6 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555166628\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2012-2025 Chevrolet Silverado \/ GMC Sierra 3500HD Cab \u0026amp; Chassis\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eYou get both air springs, the Chevrolet Silverado \/ GMC Sierra 3500HD Cab \u0026amp; Chassis brackets, all mounting hardware, air line and the inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eHand tools and the supplied brackets are all the install needs. Most shops and DIYers finish in about 1-2 hours. After install, check all fittings for leaks, make sure the lines stay away from exhaust heat and suspension travel, and keep 5 PSI minimum in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043332124904,"sku":"2715","price":800.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/15407661973736.jpg?v=1793820912"},{"product_id":"firestone-ride-rite-air-spring-kit-2017-2024-ford-f-250-f-350-f-450-4wd-2625","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2017-2024 Ford F-250\/F-350\/F-450 Super Duty 4WD","description":"\u003cp\u003eFirestone sized this Ride-Rite kit specifically for the 2017-2024 Ford F-250\/F-350\/F-450 Super Duty 4WD. The two air helper springs install above the rear axle, under the frame, and work alongside the factory rear springs instead of replacing them. Add pressure before hitching up or loading the bed and the Ford F-250\/F-350\/F-450 Super Duty sits level, so the front tires keep their grip, the headlights stay pointed at the road and braking feels normal again. Bleed them back down when the bed is empty and the ride goes back to about where the factory had it. Heavy-duty owners feel the difference most with a loaded flatbed or a big fifth-wheel behind the Ford F-250\/F-350\/F-450 Super Duty.\u003c\/p\u003e\u003cp\u003eTwo separate inflation valves let you run the left and right springs at different pressures, handy when a slide-in camper, fuel transfer tank or tool box puts more weight on one side. Firestone rates the kit for as much as 5,000 lbs of leveling support. It does not raise your GVWR, so never load past it.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolds the Ford F-250\/F-350\/F-450 Super Duty level with a trailer hooked up or the bed full\u003c\/li\u003e\n\u003cli\u003eRun different pressures per side for lopsided cargo\u003c\/li\u003e\n\u003cli\u003eLoaded-truck steering and braking feel closer to normal\u003c\/li\u003e\n\u003cli\u003eBolts up through existing factory holes, no drilling\u003c\/li\u003e\n\u003cli\u003eSupport adjusts with air pressure, from an empty bed to a full payload\u003c\/li\u003e\n\u003cli\u003eUp to 5,000 lbs of load-leveling capacity (GVWR still applies)\u003c\/li\u003e\n\u003cli\u003eRun a minimum of 5 PSI at all times to protect the springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2625 (W217602625)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 39.8 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 76755169728\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2017-2024 Ford F-250\/F-350\/F-450 Super Duty 4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eIn the box: two air helper springs, the brackets for this application, mounting hardware, air line and two inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eNothing to drill: the kit mounts using holes already in the chassis. Typical time in the driveway is 1-2 hours with hand tools. Keep the air line clear of the exhaust and anything that moves, leak-check every fitting when you finish, and never run below 5 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043332157672,"sku":"2625","price":633.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/94b17be32ce39f415ab382cd321b3240L.jpg?v=1793220560"},{"product_id":"firestone-red-label-air-spring-kit-2017-2024-ford-f-250-f-350-f-450-4wd-2716","title":"Firestone Ride-Rite RED Label Extreme Duty Rear Air Spring Kit - 2017-2024 Ford F-250\/F-350\/F-450 Super Duty 4WD","description":"\u003cp\u003eThis RED Label kit is the heavy-hauler option for the 2017-2024 Ford F-250\/F-350\/F-450 Super Duty 4WD: two Firestone air springs go in between the frame and rear axle to back up the factory rear springs. Pump them up before the trailer goes on the ball or the bed fills up, and the Ford F-250\/F-350\/F-450 Super Duty stays flat instead of nose-up, with steady steering, normal braking and headlights aimed where they belong. Running empty? Drop the pressure and the Ford F-250\/F-350\/F-450 Super Duty rides close to stock. For a Ford F-250\/F-350\/F-450 Super Duty that pulls a gooseneck or carries a camper, that extra support shows up on every trip.\u003c\/p\u003e\u003cp\u003eThis is Firestone's commercial line: heavier rubber, coated brackets and a build meant for trucks that pull fifth-wheels and goosenecks or carry service bodies and campers every week. Expect up to 7,500 lbs of leveling capacity with springs rated to 150 PSI. Never go past the GVWR on the door sticker.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStops rear sag when towing or hauling\u003c\/li\u003e\n\u003cli\u003eIndependent left and right fill valves for uneven loads\u003c\/li\u003e\n\u003cli\u003eNo drilling: the brackets use holes already in the frame\u003c\/li\u003e\n\u003cli\u003eRated for 7,500 lbs of leveling support; stay under GVWR\u003c\/li\u003e\n\u003cli\u003eRated to 150 PSI; keep at least 5 PSI in them\u003c\/li\u003e\n\u003cli\u003eAir pressure sets the support level for whatever you are carrying\u003c\/li\u003e\n\u003cli\u003ePuts weight back on the front tires for steering and braking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2716 (W217602716)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 39.9 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555170137\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2017-2024 Ford F-250\/F-350\/F-450 Super Duty 4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eTwo air springs plus brackets, hardware, air line and inflation valves, everything needed for the basic install.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eThe brackets bolt to existing factory holes, so nothing gets drilled. Budget roughly 1-2 hours with basic hand tools. Keep the air line clear of the exhaust and anything that moves, leak-check every fitting when you finish, and never run below 5 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043332288744,"sku":"2716","price":762.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/f0007cd558635dcc418989a953f2b85eL.jpg?v=1793220561"},{"product_id":"firestone-ride-rite-air-spring-kit-2021-2025-ford-f-150-with-the-factory-onboard-scale-option-2627","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2021-2025 Ford F-150 2WD\/4WD with the factory onboard scale option","description":"\u003cp\u003eFirestone sized this Ride-Rite kit specifically for the 2021-2025 Ford F-150 2WD\/4WD with the factory onboard scale option. The two air helper springs install above the rear axle, under the frame, and work alongside the factory rear springs instead of replacing them. Inflate before you load and the rear stops squatting, so the front end keeps the weight it needs to steer and stop, and your low beams stay on the pavement instead of the treetops. Running empty? Drop the pressure and the Ford F-150 rides close to stock. Half-ton Ford F-150 owners notice it most with a boat or travel trailer on the hitch.\u003c\/p\u003e\u003cp\u003eTwo separate inflation valves let you run the left and right springs at different pressures, handy when a slide-in camper, fuel transfer tank or tool box puts more weight on one side. The pair is rated for up to 5,000 lbs of load-leveling capacity; stay within your truck's GVWR.\u003c\/p\u003e\u003cp\u003eThis kit mounts inboard so it clears the factory scale hardware, and it has no tire-to-frame clearance limits, so it works with oversize tires.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolds the Ford F-150 level with a trailer hooked up or the bed full\u003c\/li\u003e\n\u003cli\u003eSteadier handling, better steering feel and more confident stops when loaded\u003c\/li\u003e\n\u003cli\u003eIncluded brackets position each spring between the frame rail and axle\u003c\/li\u003e\n\u003cli\u003eTwo fill valves so each side can be leveled on its own\u003c\/li\u003e\n\u003cli\u003eSupport adjusts with air pressure, from an empty bed to a full payload\u003c\/li\u003e\n\u003cli\u003e5,000 lb leveling capacity per kit, within your GVWR\u003c\/li\u003e\n\u003cli\u003eRun a minimum of 5 PSI at all times to protect the springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2627 (W217602627)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 27.2 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555170458\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2021-2025 Ford F-150 2WD\/4WD with the factory onboard scale option\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eTwo air springs plus brackets, hardware, air line and inflation valves, everything needed for the basic install.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eIt bolts on with common hand tools and the brackets supplied in the kit. Figure about 1-2 hours for most installs. Keep the air line clear of the exhaust and anything that moves, leak-check every fitting when you finish, and never run below 5 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043333370088,"sku":"2627","price":594.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/106f22b5114fa73edd4e2b8eb21c1742L.jpg?v=1793220570"},{"product_id":"firestone-ride-rite-air-spring-kit-2022-2026-toyota-tundra-2628","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2022-2026 Toyota Tundra 2WD\/4WD","description":"\u003cp\u003eIf your Toyota Tundra sags every time the bed or the hitch gets weight on it, this Ride-Rite kit is the fix: Firestone air helper springs sit between the frame and rear axle of the 2022-2026 Toyota Tundra 2WD\/4WD and carry part of the load. Pump them up before the trailer goes on the ball or the bed fills up, and the Toyota Tundra stays flat instead of nose-up, with steady steering, normal braking and headlights aimed where they belong. Bleed them back down when the bed is empty and the ride goes back to about where the factory had it. On a half-ton Toyota Tundra, a camper trailer or a bed of mulch is usually enough to make the rear sag.\u003c\/p\u003e\u003cp\u003eBecause each spring has its own fill valve, you can correct body lean from off-center cargo, such as a camper or a tank mounted to one side of the bed. Firestone rates the kit for as much as 5,000 lbs of leveling support. It does not raise your GVWR, so never load past it.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKeeps the rear from squatting under tongue weight or a loaded bed\u003c\/li\u003e\n\u003cli\u003eTune it for the job: low pressure empty, more pressure loaded\u003c\/li\u003e\n\u003cli\u003eNever let the springs drop below 5 PSI\u003c\/li\u003e\n\u003cli\u003eLoaded-truck steering and braking feel closer to normal\u003c\/li\u003e\n\u003cli\u003eRun different pressures per side for lopsided cargo\u003c\/li\u003e\n\u003cli\u003eBrackets for the Toyota Tundra are in the box and mount the springs between frame and axle\u003c\/li\u003e\n\u003cli\u003eUp to 5,000 lbs of load-leveling capacity (GVWR still applies)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2628 (W217602628)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 22.4 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555171943\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2022-2026 Toyota Tundra 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eTwo air springs plus brackets, hardware, air line and inflation valves, everything needed for the basic install.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eHand tools and the supplied brackets are all the install needs. Figure about 1-2 hours for most installs. After install, check all fittings for leaks, make sure the lines stay away from exhaust heat and suspension travel, and keep 5 PSI minimum in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043333468392,"sku":"2628","price":594.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/cfc7de39b226a2e9d70ac51442a9e01bL.jpg?v=1793220570"},{"product_id":"firestone-ride-rite-air-spring-kit-2023-2025-chevy-colorado-gmc-canyon-2637","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2023-2025 Chevrolet Colorado \/ GMC Canyon 2WD\/4WD","description":"\u003cp\u003eBuilt for the 2023-2025 Chevrolet Colorado \/ GMC Canyon 2WD\/4WD, this Firestone Ride-Rite kit adds two air helper springs between the frame rails and the rear axle, so the stock rear springs get help only when you ask for it. Put air in ahead of a towing or hauling job and the rear end holds its height, which keeps weight on the front axle for steering and braking and keeps your lights out of oncoming drivers' eyes. Running empty? Drop the pressure and the Chevrolet Colorado \/ GMC Canyon rides close to stock. A loaded Chevrolet Colorado \/ GMC Canyon with a rooftop tent and gear in the bed benefits from adjustable rear support.\u003c\/p\u003e\u003cp\u003eBecause each spring has its own fill valve, you can correct body lean from off-center cargo, such as a camper or a tank mounted to one side of the bed. The pair is rated for up to 5,000 lbs of load-leveling capacity; stay within your truck's GVWR.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStops rear sag when towing or hauling\u003c\/li\u003e\n\u003cli\u003eSteadier handling, better steering feel and more confident stops when loaded\u003c\/li\u003e\n\u003cli\u003eOne valve per spring to correct side-to-side lean\u003c\/li\u003e\n\u003cli\u003eFrame-to-axle mounting with vehicle-specific brackets\u003c\/li\u003e\n\u003cli\u003eTune it for the job: low pressure empty, more pressure loaded\u003c\/li\u003e\n\u003cli\u003eRated for 5,000 lbs of leveling support; stay under GVWR\u003c\/li\u003e\n\u003cli\u003eNever let the springs drop below 5 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2637 (W217602637)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 24.6 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555173060\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2023-2025 Chevrolet Colorado \/ GMC Canyon 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eIn the box: two air helper springs, the brackets for this application, mounting hardware, air line and two inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eIt bolts on with common hand tools and the brackets supplied in the kit. Most shops and DIYers finish in about 1-2 hours. After install, check all fittings for leaks, make sure the lines stay away from exhaust heat and suspension travel, and keep 5 PSI minimum in the springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043333533928,"sku":"2637","price":528.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/030d161a4242f7e74850364a2a6b40d9L.jpg?v=1793220570"},{"product_id":"firestone-ride-rite-air-spring-kit-2024-2025-toyota-tacoma-4wd-2599","title":"Firestone Ride-Rite Rear Air Helper Spring Kit - 2024-2025 Toyota Tacoma 4WD","description":"\u003cp\u003eIf your Toyota Tacoma sags every time the bed or the hitch gets weight on it, this Ride-Rite kit is the fix: Firestone air helper springs sit between the frame and rear axle of the 2024-2025 Toyota Tacoma 4WD and carry part of the load. Inflate before you load and the rear stops squatting, so the front end keeps the weight it needs to steer and stop, and your low beams stay on the pavement instead of the treetops. Once the load comes off, let air out and you are back to a near-factory ride. Mid-size trucks like the Toyota Tacoma run out of rear spring quickly with a trailer or a loaded rack.\u003c\/p\u003e\u003cp\u003eThe springs fill independently, one valve per side, so a lopsided load like a transfer tank or a side-heavy tool box can be leveled out with a few extra PSI where it is needed. Rated load leveling for this kit is up to 5,000 lbs per pair, and the truck's GVWR still applies.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStops rear sag when towing or hauling\u003c\/li\u003e\n\u003cli\u003eIncluded brackets position each spring between the frame rail and axle\u003c\/li\u003e\n\u003cli\u003eRated for 5,000 lbs of leveling support; stay under GVWR\u003c\/li\u003e\n\u003cli\u003eTune it for the job: low pressure empty, more pressure loaded\u003c\/li\u003e\n\u003cli\u003eIndependent left and right fill valves for uneven loads\u003c\/li\u003e\n\u003cli\u003eNever let the springs drop below 5 PSI\u003c\/li\u003e\n\u003cli\u003eLoaded-truck steering and braking feel closer to normal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2599 (W217602599)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 24.5 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555174197\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2025 Toyota Tacoma 4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eIn the box: two air helper springs, the brackets for this application, mounting hardware, air line and two inflation valves.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003ePlan on a bolt-on job with basic hand tools; the brackets are included. Figure about 1-2 hours for most installs. Keep the air line clear of the exhaust and anything that moves, leak-check every fitting when you finish, and never run below 5 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043333599464,"sku":"2599","price":562.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/d69d6945376998ff55c658b174567255L.png?v=1793220572"},{"product_id":"firestone-all-in-one-analog-kit-1999-2004-ford-f-250-f-350-2863","title":"Firestone Ride-Rite All-In-One Analog Air Spring and Compressor Kit - 1999-2004 Ford F-250\/F-350 Super Duty 2WD\/4WD","description":"\u003cp\u003eMade for the 1999-2004 Ford F-250\/F-350 Super Duty 2WD\/4WD, this All-In-One kit combines Ride-Rite rear helper springs with an onboard compressor and a simple in-cab control: a backlit analog gauge plus a fill switch. Instead of hunting for an air hose before every tow, you adjust spring pressure from inside the Ford F-250\/F-350 Super Duty. That matters on a Ford F-250\/F-350 Super Duty that spends its weekends hooked to a stock trailer or a toy hauler.\u003c\/p\u003e\u003cp\u003eRated support tops out at 5,000 lbs of leveling, and you should never load past the truck's GVWR. The standard duty compressor reaches 100 PSI, and a no-drill compressor mounting plate is now included to speed up the install. Put the gauge somewhere visible from the driver's seat.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne part number covers the air springs and the complete compressor system\u003c\/li\u003e\n\u003cli\u003eCompressor mounts on a supplied no-drill plate\u003c\/li\u003e\n\u003cli\u003eSimple switch-and-gauge control from the driver's seat\u003c\/li\u003e\n\u003cli\u003eRated leveling capacity: 5,000 lbs (do not exceed GVWR)\u003c\/li\u003e\n\u003cli\u003eDetailed install manual in the box\u003c\/li\u003e\n\u003cli\u003eStandard duty compressor rated 100 PSI max, 9% duty cycle, 13 amp max draw and 0.32 CFM at 100 PSI\u003c\/li\u003e\n\u003cli\u003eCompatible with most gooseneck and fifth-wheel in-bed hitches, no drilling on most applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirestone part number: 2863 (W217602863)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 52.8 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 767555174586\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1999-2004 Ford F-250\/F-350 Super Duty 2WD\/4WD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eSpring side: Ride-Rite springs, brackets, hardware, air line. Air side: standard duty compressor, backlit gauge, switch, wiring harness and no-drill compressor plate.\u003c\/p\u003e\u003ch3\u003eInstall notes\u003c\/h3\u003e\u003cp\u003eStart with the springs, move on to the compressor and its mounting plate, and keep every wire and air line away from heat and moving parts. Most installs wrap up in 2-4 hours. Use a fused, key-on power source for the compressor, following Firestone's wiring steps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure it fits your truck? Call the shop at (806) 503-2161 and we will confirm before you order.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Firestone","offers":[{"title":"Default Title","offer_id":68043333730536,"sku":"2863","price":1021.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/files\/940c528bb0cdde9d6117af66e71ed815L.jpg?v=1793220572"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3637\/6296\/collections\/373a807bc4f8e0df30738fbb5ceb0f41.jpg?v=1793299362","url":"https:\/\/bdunlimited.com\/collections\/air-bags-helper-springs.oembed?page=14","provider":"Black Diamond Unlimited","version":"1.0","type":"link"}