Killer Frost Plug Plate; Incl. Plate/Bolt/O-Ring;
The coolant pressure inside the engine block can reach 70+psi at high rpm before the thermostat fully opens. This will cause a corroded frost plug to leak. The BD rear frost plug is able to be seal the leak without the need to hammer out the old frost plug. We recommend installing the rear frost plug plate when the transmission is removed. The plate can be installed with the transmission in place, however the surface finish on the back of the motor is critical and must be checked prior to use.
- Works W/Frost Plug In Place/Blown Out/Leaking
- No Need To Punch The Old Frost Plug Out
- Utilizes One Large 333 O-Ring
- Works With or Without A TCC Crossover Tube
- Perfect Time To Install One Is When Transmission Is Removed
- 12 Month Parts Warranty
Application Summary:
| Year |
Make/Model |
| 1989-1993 |
Dodge D250 |
| 1989-1993 |
Dodge D350 |
| 1994-2002 |
Dodge Ram 2500 |
| 1994-2002 |
Dodge Ram 3500 |
| 1989-1993 |
Dodge W250 |
| 1989-1993 |
Dodge W350 |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Killer Frost Plug Plate |
| Country of Origin (Primary) |
CA |
| Engine |
5.9L Cummins 98.5-02 24-Valve |
| GTIN |
00990011406505 |
| Harmonized Tariff Code (Schedule B) |
8708998180 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| Make |
Dodge |
| NAFTA Preference Criterion Code |
D |
| SDR Required Flag |
N |
| Suggested Product |
247-4203 |
| Warranty Time |
12 |
