Exhaust Brake; 4in. Exhaust Size; Incl. AutoLoc/Valve Assy/Air Pump Kit/Air Tubing/Regul. And Control Assy/Brake Control Module And Wiring Kit/Vacuum Pump Relocation Kit/Hardware;
Descending grades with trailers can be hazardous and tricky situations, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven VARIABLE REGULATING BACK-PRESSURE EXHAUST BRAKE.Controlled by a lighted On/Off toggle switch or optional stick-mounted rocker switch for manual transmissions, the BD brake communicates with the engines electronic idle verification board for quick engagement. Where it mounts: Most vehicle applications will either have BDs turbo-mount design which bolts in place of the factory elbow between the turbo and the exhaust system or the inline design mounts in the exhaust system between the engine and muffler/DPF/cat. The BD Brakes rugged cast-iron housing incorporates BDs exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. Brake valve is actuated by an air cylinder (newer models) or a powerful, three-inch vacuum cylinder (earlier models). The durable air compressor included in later model kits can even be used for other applications, such as air horns, air bags even air-ride fifth wheel hitches –it is that tough. Automatic-equipped trucks prior to 2006 require BDs programmable AutoLoc and PressureLoc kits to electronically control torque converter clutch engagement. This addition effectively reduces slippage, resulting in peak retarding performance as well as lower transmission temperatures. All BD Brake kits come complete with the brake, air compressor (where applicable), mounting hardware, port to monitor the brakes retarding performance, complete instructions and most models come with EGT port.
- BDs Exclusive Variable Orifice Technology
- Piston Rings Seals
- Stainless Steel Butterfly Shaft
- Proven To Stand Up Under The Harsh High Heat Conditions
- Mounting Hardware Are Made of Corrosion Resistant Stainless Steel
- Its The Best!! Compare To The Competition And You Will See Why
- 24 Months or 24000 Miles Warranty
- BDs Solid Offset Butterfly
- Spring Loaded Cylinder Pressure Regulation
- Provides Up To 150 Retarding HP Throughout The Engines RPM Range
- Rugged Cast Iron Housings
- BDs Exclusive Alumibronze Bushing
Information:
BDs Exclusive Variable Orifice Technology; BDs Solid Offset Butterfly; Spring Loaded Cylinder Pressure Regulation; Provides Up To 150 Retarding HP Throughout The Engines RPM Range; Rugged Cast Iron Housings; BDs Exclusive Alumibronze Bushing; Piston Rings Seals; Stainless Steel Butterfly Shaft; Proven To Stand Up Under The Harsh High Heat Conditions; Mounting Hardware Are Made of Corrosion Resistant Stainless Steel; Its The Best!! Compare To The Competition And You Will See Why; 24 Months or 24000 Miles Warranty
Application Summary:
Year |
Make/Model |
2003-2007 |
Ford F-250 Super Duty |
2003-2007 |
Ford F-350 Super Duty |
2003-2007 |
Ford F-450 Super Duty |
2003-2007 |
Ford F-550 Super Duty |
Attributes |
ASIN |
B001H346K4 |
California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Category |
Mechanical Exhaust Brakes |
Country of Origin (Primary) |
CA |
Emission Code |
Not in CA |
Engine |
6.0L Powerstroke 03-07 |
GTIN |
00990011410373 |
Harmonized Tariff Code (Schedule B) |
8481809040 |
Hazardous Material Code |
N |
Life Cycle Status Code |
Available to Order |
Make |
Ford |
NAFTA Preference Criterion Code |
D |
SDR Required Flag |
N |
Suggested Product |
1061830 |
Warranty Time |
24 |