Exhaust Brake; w/Stock Exhaust; Incl. Valve Assy/Tubing/Control Kit/Tubing Kit Duramax Exhaust Brake/Clamps/Hardware;
Descending grades with trailers can be hazardous and tricky situations, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven VARIABLE REGULATING BACK-PRESSURE EXHAUST BRAKE.Controlled by a lighted On/Off toggle switch or optional stick-mounted rocker switch for manual transmissions, the BD brake communicates with the engines electronic idle verification board for quick engagement. Where it mounts: Most vehicle applications will either have BDs turbo-mount design which bolts in place of the factory elbow between the turbo and the exhaust system or the inline design mounts in the exhaust system between the engine and muffler/DPF/cat. The BD Brakes rugged cast-iron housing incorporates BDs exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. Brake valve is actuated by an air cylinder (newer models) or a powerful, three-inch vacuum cylinder (earlier models). The durable air compressor included in later model kits can even be used for other applications, such as air horns, air bags even air-ride fifth wheel hitches –it is that tough. Automatic-equipped trucks prior to 2006 require BDs programmable AutoLoc and PressureLoc kits to electronically control torque converter clutch engagement. This addition effectively reduces slippage, resulting in peak retarding performance as well as lower transmission temperatures. All BD Brake kits come complete with the brake, air compressor (where applicable), mounting hardware, port to monitor the brakes retarding performance, complete instructions and most models come with EGT port.
Descending grades with trailers can be hazardous and tricky situations, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven VARIABLE REGULATING BACK-PRESSURE EXHAUST BRAKE.Controlled by a lighted On/Off toggle switch or optional stick-mounted rocker switch for manual transmissions, the BD brake communicates with the engines electronic idle verification board for quick engagement. Where it mounts: Most vehicle applications will either have BDs turbo-mount design which bolts in place of the factory elbow between the turbo and the exhaust system or the inline design mounts in the exhaust system between the engine and muffler/DPF/cat. The BD Brakes rugged cast-iron housing incorporates BDs exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. Brake valve is actuated by an air cylinder (newer models) or a powerful, three-inch vacuum cylinder (earlier models). The durable air compressor included in later model kits can even be used for other applications, such as air horns, air bags even air-ride fifth wheel hitches –it is that tough. Automatic-equipped trucks prior to 2006 require BDs programmable AutoLoc and PressureLoc kits to electronically control torque converter clutch engagement. This addition effectively reduces slippage, resulting in peak retarding performance as well as lower transmission temperatures. All BD Brake kits come complete with the brake, air compressor (where applicable), mounting hardware, port to monitor the brakes retarding performance, complete instructions and most models come with EGT port.
- BDs Exclusive Variable Orifice Technology
- Piston Rings Seals
- Stainless Steel Butterfly Shaft
- Proven To Stand Up Under The Harsh High Heat Conditions
- Mounting Hardware Are Made of Corrosion Resistant Stainless Steel
- Its The Best!! Compare To The Competition And You Will See Why
- 24 Months or 24000 Miles Warranty
- BDs Solid Offset Butterfly
- Spring Loaded Cylinder Pressure Regulation
- Provides Up To 150 Retarding HP Throughout The Engines RPM Range
- Rugged Cast Iron Housings
- BDs Exclusive Alumibronze Bushing
Information:
BDs Exclusive Variable Orifice Technology; BDs Solid Offset Butterfly; Spring Loaded Cylinder Pressure Regulation; Provides Up To 150 Retarding HP Throughout The Engines RPM Range; Rugged Cast Iron Housings; BDs Exclusive Alumibronze Bushing; Piston Rings Seals; Stainless Steel Butterfly Shaft; Proven To Stand Up Under The Harsh High Heat Conditions; Mounting Hardware Are Made of Corrosion Resistant Stainless Steel; Its The Best!! Compare To The Competition And You Will See Why; 24 Months or 24000 Miles WarrantyApplication Summary:
Year | Make/Model |
---|---|
2003-2009 | Chevrolet C4500 Kodiak |
2003-2009 | Chevrolet C5500 Kodiak |
2006-2010 | Chevrolet Express 2500 |
2006-2010 | Chevrolet Express 3500 |
2009-2010 | Chevrolet Express 4500 |
2001-2010 | Chevrolet Silverado 2500 HD |
2007 | Chevrolet Silverado 2500 HD Classic |
2001-2006 | Chevrolet Silverado 3500 |
2007 | Chevrolet Silverado 3500 Classic |
2007-2010 | Chevrolet Silverado 3500 HD |
2003-2009 | GMC C4500 Topkick |
2003-2009 | GMC C5500 Topkick |
2006-2010 | GMC Savana 2500 |
2006-2010 | GMC Savana 3500 |
2009-2010 | GMC Savana 4500 |
2001-2010 | GMC Sierra 2500 HD |
2007 | GMC Sierra 2500 HD Classic |
2001-2006 | GMC Sierra 3500 |
2007 | GMC Sierra 3500 Classic |
2007-2010 | GMC Sierra 3500 HD |
2006 | Hummer H1 |
Attributes | |
ASIN | B001H3464K |
California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Category | Mechanical Exhaust Brakes |
Country of Origin (Primary) | CA |
Emission Code | Not in CA |
Engine | Duramax 6.6L 07.5-10 LMM |
GTIN | 00990011410311 |
Harmonized Tariff Code (Schedule B) | 8481809040 |
Hazardous Material Code | N |
Life Cycle Status Code | Available to Order |
Make | Chevy / GM |
NAFTA Preference Criterion Code | D |
SDR Required Flag | N |
Suggested Product | 1300240 |
Warranty Time | 24 |
BD Diesel Performance 1024310 Brake-2001-2010 Duramax 6.6Lw/Stk Exh
Product Information
- Brand: BD Diesel Performance
- Product Number: 1024310
$1,640.95